Jump to content
Sign in to follow this  
Angry_Games

Socket 939 Overclocking Database

Recommended Posts

DFI LANPARTY nF3 Ultra-D - 7/11/2005 BIOS

 

AMD Athlon64 3000+ S939 (Venice), (LBBLE0522CPMW)

 

Corsair PC3200 4x512MB ,(VS1GBKIT400)

 

ATI Radeon 9800 Pro 128MB, Catalyst (5.8)

 

MAXTOR 80GB (6Y080L0) IDE hdd (8MB cache)

 

LG GCR-8523B 52X MAX EIDE

 

Enermax EG495P-VE Noisetaker 485W Power Supply

 

Zalman CNPS7000B-CU AS5

 

 

==========

 

 

Genie BIOS Settings:

CPU Overclock in MHz = 290

Hammer Fid Control = x9

AGP OverClock in MHz = 67

LDT/FSB Frequency Ratio = 3x

AMD K8 Cool and Quiet = Disable

 

 

CPU VID Control = 1.525v

CPU Voltage adjusting = +0.3v

Chipset Voltage Control = 1.75v

Memory Voltage Control = 2.7v

AGP Voltage Control = 1.6v

 

DRAM Configuration Settings:

 

Memory Hole for PCI MMIO = Disabled

Max Memclock (MHz) = Auto

1T/2T Memory Timing = 2T

CAS# latency (Tcl) = 2.5

RAS# to CAS# delay (Trcd) = 3

Min RAS# active time (Tras) = 7

Row precharge Time (Trp) = 3

Write Recovery Time (Twr) = Auto

RAS#-to-RAS# delay (Trrd) = 3

Row Refresh time (Trfc) = 13

Row cycle time (Trc) = 11

Write-to-Read Delay Twtr) = 2

Read-to-Write Delay (Trwt) = 2

Refresh Rate (Tref) = Auto

Write Cas Latency (Twcl) = 1

Max Asynchronous latency = 8ns

Read Preamble = 6.0ns

Dynamic Idle Cycle counter = 256

DDR output driving = Weak Drive

DDR DQ drive strength = 50% Reduction

ECC Function = Disable

 

 

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.3 + Everest 2.20.405:

 

image39x2904sy.th.jpg

 

 

3dMark2003: (6304)

 

3dmark03score9zg.th.jpg

 

 

3dMark2005: (2851)

 

3dmark05score9me.th.jpg

 

 

Aquamark 3d: (52,012)

 

aquamark3score1qw.jpg

 

 

==========

 

 

 

short description:

9x290 @ 2630Mhz 1.57V +0.3

2.5,3,3,7 2T LDT3x @2.7v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 SLI-DR - 7/04-2 BigToe BIOS

 

AMD Athlon64 X2 4400+ dual core

 

4x1024 OCZ PC4000EL Gold (OCZ5002048ELGE-K)

 

XFX 7800GTX 256MB, 496/1319 81.82 drivers

 

3x Western Digital "Raptor" 10,000RPM SATA (RAID-0)

 

ASUS CD-S520/A5 Black IDE CD-ROM Drive

 

OCZ PowerStream OCZ600ADJ ATX 600W Power Supply - Retail

 

 

 

*

*

 

bios_4gb_x2_245x11-1.jpg

 

bios_4gb_x2_245x11-2.jpg

 

bios_4gb_x2_245x11-3.jpg

 

*

*

 

==========

 

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  245

LDT/FSB Frequency Ratio.......................  -  AUTO

CPU/FSB Frequency Ratio.......................  -  Auto

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  1.500v



CPU VID Control...............................  -  1.350v

CPU VID Special Control.......................  -  Above VID * 113%

LDT Voltage Control...........................  -  1.30v 

Chip Set Voltage Control......................  -  1.60v

DRAM Voltage Control..........................  -  [b]2.80v[/b][/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  200=RAM/FSB:01/01

Command Per Clock (CPC).......................  -  Disable

CAS Latency Control (Tcl).....................  -  3.0

RAS# to CAS# delay (Trcd).....................  -  04 Bus Clocks

Min RAS# active time (Tras)...................  -  08 Bus Clocks

Row precharge time (Trp)......................  -  04 Bus Clocks

Row Cycle time (Trc)..........................  -  13 Bus Clocks

Row refresh cyc time (Trfc)...................  -  16 Bus Clocks

Row to Row delay (Trrd).......................  -  03 Bus Clocks

Write recovery time (Twr).....................  -  03 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Auto

DRAM Data Drive Strength......................  -  Auto

Max Async Latency.............................  -  Auto

DRAM Response Time............................  -  Fast

Read Preamble Time............................  -  Auto

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest 2.01:

 

http://www.angrygames.com/ocdb/angry/nf4/4...x2_245x11-1.jpg

 

 

3dMark2003:

 

4gb_x2_245x11-2.jpg

 

 

3dMark2005:

 

4gb_x2_245x11-3.jpg

 

 

Aquamark 3d:

 

4gb_x2_245x11-4.jpg

 

 

AMD Nbench:

 

4gb_x2_245x11-5.jpg

 

 

==========

 

 

 

short description:

245x11 @ 2696Mhz, 1.350v + 113%

3.0-4-8-4 @ 2.80v vdimm

Share this post


Link to post
Share on other sites

DFI nF4 DAGF - 08/11/2005 BIOS

 

4000 Sandy CABGE 0515SPWM

 

2x1024mb Patriot LL

 

Power Color x850xt @ 580621 with Cat 5.9

 

1x 20gig Western Digital IDE drive

 

ASUS IDE CD-ROM Drive

 

OCZ 600w Power Stream SLI Edition

 

Thermalright SLK948U with 92mm Panaflo

 

*

*

*

*

 

==========

 

 

Genie BIOS Settings:

CPU Frequency - 250

Hammer Fid Control - 11

HTT Frequency - 4

PCIE Clock - 100Mhz

 

DDR Voltage Control - 2.8v

Chip Voltage Control - 1.6v

CPU Voltage - 1.625

 

DRAM Configuration Settings:

Mem Clock mode - Limit

Mem Clock Index Value - 200 (DRAM/FSB:1/01)

CAS Latency Control (Tcl) - 2.5

Min RAS# active time (Tras) - 05 Bus Clocks

RAS# to CAS# delay (Trcd) - 03 Bus Clocks

Row precharge time (Trp) - 02 Bus Clocks

Row to Row delay (Trrd) - 03 Bus Clocks

Row Cycle time (Trc) - 08 Bus Clocks

Row refresh cyc time (Trfc) - 14 Bus Clocks

Write recovery time (Twr) - 03 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - Auto

Write CAS Latency (Twcl) - Auto

DDR Output Driving - Weak

DDR DQ Drive Strenth - Auto

Bottom of 32Bit[31:24]IO - B0

1T2T Memory Timing - 1T

Read Preamble Value - 5.5ns

Async Latency Value - 8ns

Dynamic IdleCycle Counter - Auto

DRAM Bank Interleave - Enable

Burst Length - 4 beats

Enable ALL DIMM Clock - enable

SW Memory hole remapping - disable

HW Memory hole remapping - disable

MTRR Mapping mode - continuous

DRAM ECC Feature Control - disable

 

 

 

==========

 

 

Prime95 + 3dMark2001SE + 2xCPU-Z :

 

untitledmedium2oa.jpg

 

 

3dMark2003 + Everest :

 

untitled2medium6tj.jpg

 

 

3dMark2005 :

 

untitled3medium4ea.jpg

 

 

Aquamark 3d:

 

untitled4medium5br.jpg

 

 

==========

 

 

 

short description:

250x11=2750mhz 1.625vcore 2.8vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D - 6/23BIOS (shipping BIOS)

 

AMD Athlon64 3200+ E6 Venice ADA3200DAA4DW - LBBWE-0535EPGW

 

2x512MB Kingston HyperX PC3200 (CH-5)

 

3dFuzion 7800GT 256MB, 400/1000 81.85 drivers

 

Seagate 160GB SATA 300 NCQ hdd (8MB cache)

 

Plextor PX-716SA/SW DL DVD Burner

 

OCZ PowerStream OCZ600ADJ ATX 2.0 600W PSU

 

 

 

*

*

 

bios-genie1.jpg

 

bios-genie2.jpg

 

bios-ram1.jpg

 

bios-ram2.jpg

 

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 303

LDT/FSB Frequency Ratio - 3x

CPU/FSB Frequency Ratio - 9x

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - StartUp

 

CPU VID Control - 1.425v

CPU VID Special Control - Above VID * 123%

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.50v

DRAM Voltage Control - 2.6v

 

DRAM Configuration Settings:

DRAM Frequency Set - 140=RAM/FSB:07/10

Command Per Clock (CPC) - Auto

CAS Latency Control (Tcl) - 2.0

RAS# to CAS# delay (Trcd) - 03 Bus Clocks

Min RAS# active time (Tras) - 02 Bus Clocks

Row precharge time (Trp) - 02 Bus Clocks

Row Cycle time (Trc) - 08 Bus Clocks

Row refresh cyc time (Trfc) - AUTO Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 3120 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - AUTO

DRAM Data Drive Strength - Auto

Max Async Latency - Auto

DRAM Response Time - Normal

Read Preamble Time - AUTO

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.30:

 

http://home.earthlink.net/~st919tte/sitebu...me-3dmark01.jpg

 

 

3dMark2003 + Aquamark:

 

http://home.earthlink.net/~st919tte/sitebu...03-aquamark.jpg

 

 

3dMark2005 + Everest read:

 

http://home.earthlink.net/~st919tte/sitebu...k05-everest.jpg

 

 

 

 

==========

 

 

 

short description:

303x9 @ 2728Mhz, 1.425v + 123% three 120mm Case fans, no mods.

2-3-2-8 @ 2.6v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D - 510-2FIX Bios

 

AMD Athlon64 3200+ Venice on Big Typhoon

 

4x512 Geil TCCD (Ultra-X (Yellow) One S (Orange))

 

Galaxy 6600GT 128MB, 569/1280 77.72 drivers

 

Samsung 80Gb SATA hdd (8MB cache)

 

FSP BlueStorm 500W psu

 

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 270

LDT/FSB Frequency Ratio - 3

CPU/FSB Frequency Ratio - 10

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - Startup

 

CPU VID Control - 1.550v

CPU VID Special Control - AUTO

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.50v

DRAM Voltage Control - 2.80v

 

DRAM Configuration Settings:

DRAM Frequency Set - 180=RAM/FSB:09/10

Command Per Clock (CPC) - Disable

CAS Latency Control (Tcl) - 2.0

RAS# to CAS# delay (Trcd) - 03 Bus Clocks

Min RAS# active time (Tras) - 06 Bus Clocks

Row precharge time (Trp) - 03 Bus Clocks

Row Cycle time (Trc) - 07 Bus Clocks

Row refresh cyc time (Trfc) - 14 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 2560 Cycles

Write CAS Latency (Twcl) - 1

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 8

DRAM Data Drive Strength - Level 1

Max Async Latency - 9.0 Nano Seconds

DRAM Response Time - Fast

Read Preamble Time - 5.5 Nano Seconds

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE (23458) + CPU-Z 1.30:

 

http://img461.imageshack.us/img461/8058/8h...ime3dm018ml.jpg

 

 

3dMark2003 (10055) + Everest 1.51 Memory Read (5582):

 

http://img394.imageshack.us/img394/4526/3d...restread8bn.jpg

 

 

3dMark2005 (4287) + Everest 1.51 Memory Write (2240):

 

http://img394.imageshack.us/img394/9765/3d...estwrite2qj.jpg

 

 

Aquamark 3d (67499):

 

http://img394.imageshack.us/img394/3241/aquamark0ce.jpg

 

 

==========

 

 

 

short description:

270x10 @ 2700Mhz, 1.550v

4x512Mb @ 245MHz @ 2-3-6-3 @ 2.80v

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D - 6/23 stock bios

 

AMD Athlon64 3000+ Venice REV F @ 2.7G

 

ThermalRight XP-120 c/w Vantec SF12025L Stealth 120mm fan

 

OCZ platinum rev 2 EL 1GB (2x512) dual kit DDR 400 (yellow slots)

 

Sapphire ATI Radeon X800 GTO² 256MB GDDR3 unlocked all 16 pipes, 518/1044 omega drivers 2.6.71

 

Samsung SpinPoint P SP2004C 200GB SATA-II 8MB Cache (8MB cache)

 

Pioneer DVR-110DBK 16 x 16 DVD±RW Dual Layer ReWriter

 

Enermax Noisetaker 600W EG701AX-VE(W) SFMA ATX2.0 SLI Compliant PSU

 

THERMALTAKE SOPRANO BLACK MIDDLE TOWER CASE WITH WINDOW

 

*

*

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 299

LDT/FSB Frequency Ratio - AUTO

CPU/FSB Frequency Ratio - 9

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.500v

 

CPU VID Control - 1.300v

CPU VID Special Control - Above VID * 123%

LDT Voltage Control - 1.30v

Chip Set Voltage Control - 1.60v

DRAM Voltage Control - 2.90v

 

DRAM Configuration Settings:

DRAM Frequency Set - 180=RAM/FSB:09/10

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2.5

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 04 Bus Clocks

Row Cycle time (Trc) - 08 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 03 Bus Clocks

Write recovery time (Twr) - 03 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 4708 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 7

DRAM Data Drive Strength - Level 2

Max Async Latency - Auto

DRAM Response Time - Normal

Read Preamble Time - Auto

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

 

cpu-z + Prime95 + 3dmark2001:

http://www.angrygames.com/ocdb/paulwelford...dmark2001se.jpg

 

3dmark2003:

3dmark03.jpg

 

3dmark2005:

3dmark05.jpg

 

Aquamark3d:

aquamark3.jpg

 

Everest 1.51 Memory Read:

everest1.51read.jpg

 

 

 

 

==========

 

 

 

short description:

299x9 @ 2689Mhz, 1.300v + 123%

2.5-4-8-4 @ 2.9v vdimm

Share this post


Link to post
Share on other sites

DFI nF4 DAGF - 08/11/2005 BIOS

 

4000 Sandy CABGE 0515SPWM

 

2x512mb Mushkin pc3500 Lev2 BH5

 

Power Color x850xt @ 580621 with Cat 5.9

 

1x 20gig Western Digital IDE drive

 

ASUS IDE CD-ROM Drive

 

OCZ 600w Power Stream SLI Edition

 

Thermalright SLK948U with 92mm Panaflo

 

*

*

*

*

 

==========

 

 

Genie BIOS Settings:

CPU Frequency - 275

Hammer Fid Control - 10

HTT Frequency - 3

PCIE Clock - 100Mhz

 

DDR Voltage Control - 3.2v

Chip Voltage Control - 1.7v

CPU Voltage - 1.625

 

DRAM Configuration Settings:

Mem Clock mode - Limit

Mem Clock Index Value - 200 (DRAM/FSB:1/01)

CAS Latency Control (Tcl) - 2

Min RAS# active time (Tras) - 05 Bus Clocks

RAS# to CAS# delay (Trcd) - 02 Bus Clocks

Row precharge time (Trp) - 02 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Row Cycle time (Trc) - 08 Bus Clocks

Row refresh cyc time (Trfc) - 14 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - Auto

Write CAS Latency (Twcl) - Auto

DDR Output Driving - Normal

DDR DQ Drive Strenth - Auto

Bottom of 32Bit[31:24]IO - B0

1T2T Memory Timing - 1T

Read Preamble Value - 5.5ns

Async Latency Value - 7ns

Dynamic IdleCycle Counter - 64

DRAM Bank Interleave - Enable

Burst Length - 4 beats

Enable ALL DIMM Clock - enable

SW Memory hole remapping - disable

HW Memory hole remapping - disable

MTRR Mapping mode - continuous

DRAM ECC Feature Control - disable

 

 

 

==========

 

 

Prime95 + 3dMark2001SE + 2xCPU-Z :

 

untitled6fn.jpg

 

 

3dMark2003 + SuperPi 1m :

 

untitled21vi.jpg

 

 

3dMark2005 + Everest :

 

untitled39jf.jpg

 

 

Aquamark 3d:

 

untitled47vm.jpg

 

 

==========

 

 

 

short description:

275x10=2750mhz 1.625vcore 3.2vdimm

Mem @ 230 2-5-2-2

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D - 6-23 BIOS

 

AMD Athlon X2 3800+ (Toledo Core)

 

Crucial Value (2x1024MB) DDR PC3200

 

BFG 7800GTX 256MB, 490/1310 77.77 drivers

 

Maxtor DiamondMax Plus 10 250GB SATA II

120GB 8MB cache IDE

 

Nec 3500 DVD-RW

Enermax EG565P-VE 535W

 

Dell 2005fpw Lcd

 

*

*

 

 

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 250

LDT/FSB Frequency Ratio - 3

CPU/FSB Frequency Ratio - 10

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - Startup

 

CPU VID Control - 1.250v

CPU VID Special Control - Above VID * 113%

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.50v

DRAM Voltage Control - 2.60v

 

DRAM Configuration Settings:

DRAM Frequency Set - 166=RAM/FSB:05/6

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2.5

RAS# to CAS# delay (Trcd) - 03 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 03 Bus Clocks

Row Cycle time (Trc) - 07 Bus Clocks

Row refresh cyc time (Trfc) - Auto

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 3120 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 7

DRAM Data Drive Strength - Level 2

Max Async Latency - 8.0 Nano Seconds

DRAM Response Time - Fast

Read Preamble Time - 6.0 Nano Seconds

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 04 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z:

 

http://www.down6.org/comp/2500stable2.jpg

 

 

3dMark2003:

 

25003d03.jpg

 

 

3dMark2005 + Everest:

 

25003d05ever.jpg

 

 

Aquamark 3d:

 

2500am3.jpg

 

 

==========

 

 

 

short description:

x2 3800+ @ 250x10 @ 2500Mhz, 1.250v + 113%

2.5-3-8-3 @ 2.6v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 SLI-DR 7/02/05 Oscars Bios

 

AMD Athlon64 3700 SanDiego

 

2x512MB Mushkin 3500 Lev11 (BH-5)

 

EVGA 6600 GT 128MB

 

2 Hitachi Sata 11 80 Gig Raid0 (3.0)

 

OCZ PowerStream OCZ520ADJ ATX 520W Power Supply - Retail

 

 

 

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 255

LDT/FSB Frequency Ratio - AUTO

CPU/FSB Frequency Ratio - x 11

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - Startup

 

CPU VID Control - 1.400v

CPU VID Special Control - Above VID * 113%

LDT Voltage Control - 1.30v

Chip Set Voltage Control - 1.60v

DRAM Voltage Control - 3.40v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200 (Dram/FSB: 1.1

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2.0

RAS# to CAS# delay (Trcd) - 03 Bus Clocks

Min RAS# active time (Tras) - 07 Bus Clocks

Row precharge time (Trp) - 03 Bus Clocks

Row Cycle time (Trc) - 07 Bus Clocks

Row refresh cyc time (Trfc) - 17 Bus Clocks

Row to Row delay (Trrd) - 03 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 4708 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 7

DRAM Data Drive Strength - Level 2

Max Async Latency - 8.0 Nano Seconds

DRAM Response Time - Fast

Read Preamble Time - 6.0 Nano Seconds

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 04 x

32 Byte Granularity - Disable(4 Bursts)

 

Prime95 + 3dMark2001SE + CPUZ

http://img485.imageshack.us/img485/284/prime2gw.png

 

 

3dMark2003

3dmark037vi.jpg

 

3dMark2005

3dmark056ka.jpg

 

Aquamark3d

aquamark3small4ag.jpg

 

Everest Home Edition

http://img367.imageshack.us/img367/2076/un...everest24pl.jpg

 

Short Description

255x11 @ 2805 MHz

1.400v + 113%

2,3,3,7 @3.4 Vdimm 1.1

CPC-Enabled

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 sli-DR - 7/04-2 BigToe BIOS

 

AMD Athlon 64 3700+ 1GHz FSB Socket 939 Processor - Retail

 

Crucial Ballistix ddr500 pc4000

 

eVGA Geforce 7800GT 256-P2-N518 Video Card - Retail 445/1070

 

Western Digital Caviar SE 300GB 3.5" Serial ATA150 Hard Drive - OEM

 

NEC Black IDE DVD Burner Model ND-3540A - OEM

 

OCZ PowerStream OCZ520ADJSLI 520W Power Supply - Retail

 

 

 

*

*

 

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 300

LDT/FSB Frequency Ratio - AUTO

CPU/FSB Frequency Ratio - 9X

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - Auto

 

CPU VID Control - 1.450v

CPU VID Special Control - Above VID * 104%

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.50v

DRAM Voltage Control - 2.6v

 

DRAM Configuration Settings:

DRAM Frequency Set - 180=RAM/FSB:09/10

Command Per Clock (CPC) - Auto

CAS Latency Control (Tcl) - 3

RAS# to CAS# delay (Trcd) - 3 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 3 Bus Clocks

Row Cycle time (Trc) - 12 Bus Clocks

Row refresh cyc time (Trfc) - 24 Bus Clocks

Row to Row delay (Trrd) - 03 Bus Clocks

Write recovery time (Twr) - 03 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - Auto

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Auto

DRAM Data Drive Strength - Auto

Max Async Latency - Auto

DRAM Response Time - Normal

Read Preamble Time - Auto

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 04 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest 2.01:

 

doneanddoneallbetter3qt.th.jpg

 

3dMark2003:

 

3d030og.th.jpg

 

3dMark2005:

 

300x9prime74003d052cpuz29xo.th.jpg

 

Aquamark 3d:

 

 

awuamark890001ju.th.jpg

 

==========

 

 

 

short description:

300x9 @ 2700Mhz, 1.450v + 104%

3-3-8-3 DDR540 (270) @ 2.6v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 UT SLI-D - 7/04-2 BigToe BIOS

 

AMD Athlon 64X2 4800+ Toledo

 

2x1024MB OCZ Platinum EB

 

PNY 7800GTX 256MB, 470/1300 81.85 drivers

 

4xHitachi 250GB SATA2 hdd

 

NEC 3520a Black IDE DVD/CD-RW Drive

 

PC Power & Cooling 510 Deluxe Power Supply

 

 

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 270

LDT/FSB Frequency Ratio - AUTO

CPU/FSB Frequency Ratio - 10

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.500v

 

CPU VID Control - 1.425v

CPU VID Special Control - Above VID * 110%

LDT Voltage Control - 1.40v

Chip Set Voltage Control - 1.60v

DRAM Voltage Control - 2.70v

 

DRAM Configuration Settings:

DRAM Frequency Set - 180=RAM/FSB:09/10

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 3.0

RAS# to CAS# delay (Trcd) - 03 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 02 Bus Clocks

Row Cycle time (Trc) - 07 Bus Clocks

Row refresh cyc time (Trfc) - 14 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 4708 Cycles

Write CAS Latency (Twcl) - 01 Bus Clocks

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 8

DRAM Data Drive Strength - Level 2

Max Async Latency - 8.0 Nano Seconds

DRAM Response Time - Normal

Read Preamble Time - 6.5 Nano Seconds

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.30:

 

http://www.netfrastructure.net/desktop.jpg

 

 

3dMark2003:

 

3dmark03.jpg

 

 

3dMark2005:

 

3dmark05.jpg

 

Aquamark 3d:

 

aquamark.jpg

 

==========

 

I cannot run Everest Home because this computer is on a domain and Everest wants me to buy it because of this.

 

This represents a lot of work and I have some comments to make about it later. I am pretty happy, but finding that I am bumping into a wall at 250 HTT. I have two sets of RAM that will do 250, but I cannot get them to prime for more than 15 minutes when they are at 250 or above. I have used all of my available time letely trying.

 

 

short description:

270x10 @ 2700Mhz, 1.425v + 110%

3-3-2-8 @ 2.7v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY RDX200 CF-DR (10/26/2005 BIOS)

 

AMD Athlon64 3200+ Venice 512k L2

 

2x512MB PC3200 GEIL ONE TCCD (GOS1GB3200DC)

 

XFX GeForce 7800GT, 490/1310 81.85 drivers

 

160GB Maxtor IDE

 

NEC 3540A Black IDE DVD-RW Drive

 

Seasonic S12-600 (revA2) ATX 600W Power Supply - Retail

 

 

 

*

*

 

bios_rdx200_275x10-1.gif

 

bios_rdx200_275x10-2.gif

 

bios_rdx200_275x10-3.gif

 

bios_rdx200_275x10-4.gif

 

*

*

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  275

HT PLL High Speed.............................  -  Enabled

LDT/FSB Frequency Ratio.......................  -  x 3.0

CPU/FSB Frequency Ratio.......................  -  x 10.0



CPU VID StartUp Value.........................  -  1.500v



NB-SB Port Configuration......................  -  Enhanced



CPU VID Control...............................  -  1.450v

CPU VID Special Control.......................  -  Above VID * 114.4%

DRAM Voltage Control..........................  -  2.75v

SB PCIE Voltage...............................  -  1.8v

NB Analog Voltage.............................  -  1.3v

LDT Bus Voltage...............................  -  1.3v 

NB Core Voltage...............................  -  1.3v

[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  166=RAM/FSB:05/06

Command Per Clock (CPC).......................  -  Enable

CAS Latency Control (Tcl).....................  -  2.0

RAS# to CAS# delay (Trcd).....................  -  03 Bus Clocks

Min RAS# active time (Tras)...................  -  06 Bus Clocks

Row precharge time (Trp)......................  -  03 Bus Clocks

Row Cycle time (Trc)..........................  -  07 Bus Clocks

Row refresh cyc time (Trfc)...................  -  16 Bus Clocks

Row to Row delay (Trrd).......................  -  02 Bus Clocks

Write recovery time (Twr).....................  -  02 Bus Clocks

Write to Read delay (Twtr)....................  -  01 Bus Clocks

Read to Write delay (Trwt)....................  -  02 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Level 7

DRAM Data Drive Strength......................  -  Level 2 (Reduce 30%)

Max Async Latency.............................  -  8.0 ns

DRAM Response Time............................  -  6.0 ns

Read Preamble Time............................  -  Auto

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(8 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest 2.01:

 

http://www.angrygames.com/ocdb/angry/rdx20...00_275x10-1.gif

 

 

3dMark2003:

 

rdx200_275x10-2.gif

 

 

3dMark2005:

 

rdx200_275x10-3.gif

 

 

Aquamark 3d:

 

rdx200_275x10-4.gif

 

 

==========

 

 

 

short description:

275x10 @ 2750Mhz, 1.450v + 114.4%

2.0-3-6-3 @ 2.75v vdimm

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...