Jump to content
Sign in to follow this  
Angry_Games

Socket 939 Overclocking Database

Recommended Posts

DFI LANPARTY nF4 Ultra-D (6/04- BIOS)

 

AMD XP4000+ San Deigo

 

2x512MB OCZ PC4800 Platnum (OCZ600512EEPE)

 

XFX GeForce 7900GT, 552/1608 83.91 drivers

 

2X 74GB Western Digital Raptor2's 10,000RPM SATA hdd's Raid-0

 

Asus 16x DVD Ram burner

 

OCZ 700GX

 

 

 

*

*

 

 

 

*

*

 

==========

 

[b]Genie BIOS Settings:[/b]
[color=red]
FSB Bus Frequency.............................  -  305
LDT/FSB Frequency Ratio.......................  -  3x
CPU/FSB Frequency Ratio.......................  -  10x
PCI eXpress Frequency.........................  -  105Mhz

CPU VID StartUp Value.........................  -  1.400v

CPU VID Control...............................  -  1.175
CPU VID Special Control.......................  -  123%
LDT Voltage Control...........................  -  1.30v 
Chip Set Voltage Control......................  -  1.60v
DRAM Voltage Control..........................  -  2.70v[/color]

[b]DRAM Configuration Settings:[/b]
[color=red]
DRAM Frequency Set............................  -  200=RAM/FSB:01/01
Command Per Clock (CPC).......................  -  Enable 
CAS Latency Control (Tcl).....................  -  2.5
RAS# to CAS# delay (Trcd).....................  -  4
Min RAS# active time (Tras)...................  -  8
Row precharge time (Trp)......................  -  3
Row Cycle time (Trc)..........................  -  7 Bus Clocks
Row refresh cyc time (Trfc)...................  -  15 Bus Clocks
Row to Row delay (Trrd).......................  -  02 Bus Clocks
Write recovery time (Twr).....................  -  02 Bus Clocks
Write to Read delay (Twtr)....................  -  02 Bus Clocks
Read to Write delay (Trwt)....................  -  03 Bus Clocks
Refresh Period (Tref).........................  -  3072 Cycles
DRAM Bank Interleave..........................  -  Enabled

DQS Skew Control..............................  -  Auto
DQS Skew Value................................  -  0
DRAM Drive Strength...........................  -  7weak
DRAM Data Drive Strength......................  -  level 1(reduced 50%)
Max Async Latency.............................  -  8ns
DRAM Response Time............................  -  Fast
Read Preamble Time............................  -  5ns
IdleCycle Limit...............................  -  256 Cycles
Dynamic Counter...............................  -  Disable
R/W Queue Bypass..............................  -  16 x
Bypass Max....................................  -  07 x
32 Byte Granularity...........................  -  Disable(4 Bursts)
[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z:

 

toasterkn8.th.jpg

 

3dMark2003:

 

03tg8.th.jpg

 

3dMark2005:

 

05ih2.th.jpg

 

3dMark 2006:

 

06ne9.th.jpg

AquaMark3:

 

aqm3zm2.th.jpg

==========

 

 

 

short description:

305x10 @ 3050Mhz, 1.44525Vid (Est)

2.5-4-8-3 @ 2.70v vdimm[/b

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D (2006/04/06 BIOS)

 

AMD X2 3800+ Toledo ADA3800DAA5CD LDBFE 0637BPMW

 

2x512MB Corsair 3500LL PRO (TWINX1024-3500LL PRO)

 

Connect3D X850XP TE, 580/1256 Catalyst 7.3 drivers

 

320GB Seagate 7200RPM SATA HD

 

 

==========

 

[b]Genie BIOS Settings:[/b]
[color=red]
FSB Bus Frequency.............................  -  297
LDT/FSB Frequency Ratio.......................  -  3x
CPU/FSB Frequency Ratio.......................  -  10x
PCI eXpress Frequency.........................  -  100Mhz

CPU VID StartUp Value.........................  -  1.500v

CPU VID Control...............................  -  Auto
CPU VID Special Control.......................  -  Above VID * 110%
LDT Voltage Control...........................  -  1.20v 
Chip Set Voltage Control......................  -  1.50v
DRAM Voltage Control..........................  -  2.60v[/color]

[b]DRAM Configuration Settings:[/b]
[color=red]
DRAM Frequency Set............................  -  180=RAM/FSB:9/10
Command Per Clock (CPC).......................  -  Enable 
CAS Latency Control (Tcl).....................  -  3.0
RAS# to CAS# delay (Trcd).....................  -  3
Min RAS# active time (Tras)...................  -  6
Row precharge time (Trp)......................  -  2
Row Cycle time (Trc)..........................  -  10 Bus Clocks
Row refresh cyc time (Trfc)...................  -  24 Bus Clocks
Row to Row delay (Trrd).......................  -  03 Bus Clocks
Write recovery time (Twr).....................  -  03 Bus Clocks
Write to Read delay (Twtr)....................  -  02 Bus Clocks
Read to Write delay (Trwt)....................  -  03 Bus Clocks
Refresh Period (Tref).........................  -  3120 Cycles
DRAM Bank Interleave..........................  -  Enabled

DQS Skew Control..............................  -  Auto
DQS Skew Value................................  -  0
DRAM Drive Strength...........................  -  Auto
DRAM Data Drive Strength......................  -  Auto
Max Async Latency.............................  -  Auto
DRAM Response Time............................  -  Normal
Read Preamble Time............................  -  Auto
IdleCycle Limit...............................  -  256 Cycles
Dynamic Counter...............................  -  Disable
R/W Queue Bypass..............................  -  16 x
Bypass Max....................................  -  07 x
32 Byte Granularity...........................  -  Disable(4 Bursts)
[/color]

 

 

==========

 

 

 

CPU-Z Everest 3dmark2001SE Orthos

 

2940mhzscreen1vi0.th.jpg

 

3dMark2003:

 

2940mhzscreen2jv8.th.jpg

 

3dMark2005:

 

2940mhzscreen3py2.jpg

 

 

3dMark 2006:

 

2950mhzscreen4pp8.jpg

 

 

 

==========

 

 

short description:

294x10 @ 2940Mhz, 1.44v (autox110%)

3-3-2-6 @ 2.60v vdimm 267mhz

Share this post


Link to post
Share on other sites

DFI LanParty UT RDX200 CF-DR

 

AMD Opteron 165 CCBBE 0616

 

 

2x 1gb A-DATA PC3200

 

Saphire [email protected] 546core and 729mem

 

2x Western Digital satas raid-0

 

psu Hiper 580watt

 

cooler cool master gemin II

 

 

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  334

HT PLL High Speed.............................  -  enable

LDT/FSB Frequency Ratio.......................  -  3x

CPU/FSB Frequency Ratio.......................  -  Auto



CPU VID StartUp Value.........................  -  auto



NB-SB Port Configuration......................  -  Enhanced



CPU VID Control...............................  -  1.50

CPU VID Special Control.......................  -  Auto

DRAM Voltage Control..........................  -  2.99v

SB PCIE Voltage...............................  -  1.9v

NB Analog Voltage.............................  -  1.2v

LDT Bus Voltage...............................  -  1.5v 

NB Core Voltage...............................  -  1.2v

[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  120=RAM/FSB:03/05

Command Per Clock (CPC).......................  -  enable

CAS Latency Control (Tcl).....................  -  3.0 Bus Clocks

RAS# to CAS# delay (Trcd).....................  -  04 Bus Clocks

Min RAS# active time (Tras)...................  -  04 Bus Clocks

Row precharge time (Trp)......................  -  04 Bus Clocks

Row Cycle time (Trc)..........................  -  07 Bus Clocks

Row refresh cyc time (Trfc)...................  -  14 Bus Clocks

Row to Row delay (Trrd).......................  -  03 Bus Clocks

Write recovery time (Twr).....................  -  03 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  08 Bus Clocks

Refresh Period (Tref).........................  -  4672 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  level 9

DRAM Data Drive Strength......................  -  level 1 (reduce 505)

Max Async Latency.............................  -  12.0 ns

Read Preamble Time............................  -  9.0 ns

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  7 x

32 Byte Granularity...........................  -  Disable (8 Bursts)

[/color]

 

 

==========

 

 

http://img219.imageshack.us/img219/4305/oc1zf0.jpg

 

 

http://img514.imageshack.us/img514/1033/oc2ym2.jpg

 

 

http://img177.imageshack.us/img177/378/oc3jw5.jpg

 

 

http://img244.imageshack.us/img244/4950/oc4hk7.jpg

 

 

 

 

 

==========

 

 

 

short description:

334x9 @ 3006ghz, 1.520v

3.0-4-4-4 @ 2.99v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D (04/06/06 BIOS)

 

AMD OPTY 175 (CCBWE 0551VPMW)

 

2x512MB G-Skill PC4800 ( PN – 1GBFF-DDR600-1T )

 

X1900 [email protected]/797, CAT 7.5 DRIVERS

 

2X36GB Western Digital Raptor RAID 0

 

LITEON 832S DVD R/W

 

PCP&C 1KW PSU

 

Mach2 GT/Chilly1 head/Desuperheater

 

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  289

LDT/FSB Frequency Ratio.......................  -  4

CPU/FSB Frequency Ratio.......................  -  11

PCI eXpress Frequency.........................  -  105MHZ



CPU VID StartUp Value.........................  -  STARTUP



CPU VID Control...............................  -  1.35v

CPU VID Special Control.......................  -  123%

LDT Voltage Control...........................  -  1.2v

Chip Set Voltage Control......................  -  1.6v

DRAM Voltage Control..........................  -  2.6v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  200=RAM/FSB:01/01

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  2.5

RAS# to CAS# delay (Trcd).....................  -  4

Min RAS# active time (Tras)...................  -  6

Row precharge time (Trp)......................  -  3

Row Cycle time (Trc)..........................  -  7 Bus Clocks

Row refresh cyc time (Trfc)...................  -  13 Bus Clocks

Row to Row delay (Trrd).......................  -  0 Bus Clocks

Write recovery time (Twr).....................  -  02 Bus Clocks

Write to Read delay (Twtr)....................  -  01 Bus Clocks

Read to Write delay (Trwt)....................  -  02 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  6

DRAM Data Drive Strength......................  -  4

Max Async Latency.............................  -  8

DRAM Response Time............................  -  fastest

Read Preamble Time............................  -  5

IdleCycle Limit...............................  -  16 Cycles

Dynamic Counter...............................  -  Enabled

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE:

 

thumb_3d01-orthos-cpuz.JPG

 

 

 

 

3dMark2003:

 

thumb_3d03.JPG

 

 

 

 

3dMark2005:

 

thumb_3d05.JPG

 

 

 

 

 

3dMark 2006:

 

thumb_3d06.JPG

 

 

 

 

 

==========

 

 

 

short description:

289x11 @ 3179Mhz, Mach2 GT cooling

Share this post


Link to post
Share on other sites
Guest navinjohnson

DFI LanpartyUT nF4 Ultra-D (BIOS 2006/04/06)

 

AMD Opteron 170 socket939 w/ Thermalright Ultra-90 (2750Mhz, 275x10)

 

2x1GB OCZ EL Platinum PC3200 XTC (OCZP4002GK)

 

Evga GeForce 6600GT 128MB 128-bit PCI-E, 94.24 drivers, 400/1002

 

Seagate 160GB 7200RPM SATA hdd

 

Pioneer 52x/16x DVD/CD-ROM

 

PC Power & Cooling Turbo-Cool 470w Power Supply

 

Thermaltake Soprano Case

 

 

 

==========

 

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  280

LDT/FSB Frequency Ratio.......................  -  X3

CPU/FSB Frequency Ratio.......................  -  X10

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  StartUp



CPU VID Control...............................  -  1.475

CPU VID Special Control.......................  -  Auto

LDT Voltage Control...........................  -  1.20v 

Chip Set Voltage Control......................  -  1.50v

DRAM Voltage Control..........................  -  2.70v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  140=RAM/FSB:07/10

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  2

RAS# to CAS# delay (Trcd).....................  -  3

Min RAS# active time (Tras)...................  -  7

Row precharge time (Trp)......................  -  2

Row Cycle time (Trc)..........................  -  10 Bus Clocks

Row refresh cyc time (Trfc)...................  -  14 Bus Clocks

Row to Row delay (Trrd).......................  -  03 Bus Clocks

Write recovery time (Twr).....................  -  02 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  8

DRAM Data Drive Strength......................  -  1

Max Async Latency.............................  -  7.0ns

DRAM Response Time............................  -  Fast

Read Preamble Time............................  -  Auto

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  04 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Orthos + 3dMark2001SE + 2x CPUZ + SmartGuardian:

 

http://i47.photobucket.com/albums/f161/Lib...Orthoscrop2.jpg

 

3dMark2003:

 

3d032.jpg

 

3dMark2005:

 

3d052.jpg

 

3dMark2006:

 

3d062.jpg

 

Aquamark3.0

 

Aqua2.jpg

 

 

==========

 

 

 

short description:

280x10=2800mhz 1.475vcore 2.7vdimm

2-3-2-7

Share this post


Link to post
Share on other sites

DFI LANPARTY UT nF4 SLI-DR Expert (04/06/2006 BIOS)

 

AMD X2 3800+ (LCBIE Toledo core)

 

2x1024MB OCZ PC4000 (OCZ5001024ELGEGXT)

 

eVGA GeForce 7800GTX 256MB, 516/1330 94.24 drivers

 

2x Seagate Barracuda 7200.10 320GB SATAII (ST332060AS), 1x Western Digital 500GB 7200rpm SATAII (WDC WD5000AAKS-00TMA0), 1x Samsung Spinpoint 7200rpm SATAII (SP2004C)

 

Plextor PX-716A DVDR

 

Enermax 535w power supply (EG565P-VE)

 

 

 

*

*

 

th_ram_bios1.jpg th_genie_bios.jpg th_ram_bios2.jpg

*

*

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  315

LDT/FSB Frequency Ratio.......................  -  x3

CPU/FSB Frequency Ratio.......................  -  x9

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  1.525v



CPU VID Control...............................  -  1.525v

CPU VID Special Control.......................  -  *107.2%

LDT Voltage Control...........................  -  1.30v 

Chip Set Voltage Control......................  -  1.52v

DRAM Voltage Control..........................  -  2.77v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  166=RAM/FSB:05/06

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  3

RAS# to CAS# delay (Trcd).....................  -  4

Min RAS# active time (Tras)...................  -  8

Row precharge time (Trp)......................  -  3

Row Cycle time (Trc)..........................  -  11 Bus Clocks

Row refresh cyc time (Trfc)...................  -  16 Bus Clocks

Row to Row delay (Trrd).......................  -  03 Bus Clocks

Write recovery time (Twr).....................  -  03 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  Auto

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Level 07

DRAM Data Drive Strength......................  -  Level 1(Reduce 50%)

Max Async Latency.............................  -  8.0ns

DRAM Response Time............................  -  Normal

Read Preamble Time............................  -  06.0 ns

IdleCycle Limit...............................  -  128 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  04 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Orthos + 3dMark2001SE + CPU-Z (x2) + ITE Smartguardian:

 

th_ocdb_2835mhz.png

 

 

3dMark2003:

 

3dmark03.png

 

 

3dMark2005:

 

3dmark05.png

 

 

 

3dMark 2006:

 

3dmark06.png

 

 

Aquamark3:

 

aquamark.jpg

 

 

==========

 

 

short description:

315x9 @ 2835Mhz, 1.6v

3-4-3-8 @ 258Mhz, 2.72v

115+ hours Orthos stable

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D (04/06/06 BIOS)

 

AMD OPTY 175 (CCBWE 0551VPMW)

 

2x512MB G-Skill PC4800 + 2x512mb OCZ 4800 Platinum

 

X1900 [email protected]/797, CAT 6.6 DRIVERS

 

2X36GB Western Digital Raptor RAID 0

 

LITEON 832S DVD R/W

 

PCP&C 1KW PSU

 

Mach2 GT/Chilly1 head/Desuperheater

 

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  289

LDT/FSB Frequency Ratio.......................  -  4

CPU/FSB Frequency Ratio.......................  -  11

PCI eXpress Frequency.........................  -  105MHZ



CPU VID StartUp Value.........................  -  STARTUP



CPU VID Control...............................  -  1.35v

CPU VID Special Control.......................  -  123%

LDT Voltage Control...........................  -  1.3v

Chip Set Voltage Control......................  -  1.6v

DRAM Voltage Control..........................  -  2.8v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  166=RAM/FSB

Command Per Clock (CPC).......................  -  Disabled

CAS Latency Control (Tcl).....................  -  2.5

RAS# to CAS# delay (Trcd).....................  -  3

Min RAS# active time (Tras)...................  -  5

Row precharge time (Trp)......................  -  3

Row Cycle time (Trc)..........................  -  7 Bus Clocks

Row refresh cyc time (Trfc)...................  -  14 Bus Clocks

Row to Row delay (Trrd).......................  -  02 Bus Clocks

Write recovery time (Twr).....................  -  02 Bus Clocks

Write to Read delay (Twtr)....................  -  01 Bus Clocks

Read to Write delay (Trwt)....................  -  02 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  7

DRAM Data Drive Strength......................  -  4

Max Async Latency.............................  -  8

DRAM Response Time............................  -  fast

Read Preamble Time............................  -  5

IdleCycle Limit...............................  -  16 Cycles

Dynamic Counter...............................  -  Enabled

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE:

 

fe43cz_th.jpg

 

 

 

 

3dMark2003:

 

iw0vuq_th.jpg

 

 

 

 

3dMark2005:

 

21l0ua9_th.jpg

 

 

 

 

 

3dMark 2006:

 

241t5bp_th.jpg

 

 

 

 

 

==========

 

 

 

short description:

289x11 @ 3179Mhz, Mach2 GT cooling

Edited by kitfit1

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 SLI-D (704-2BT BIOS)

 

AMD A64 3700+ San Diego KACAE 0546EPAW

 

2x1024MB G.Skill HX PC3200(DDR400) (F1-3200BIU2-2GBHX)

 

Dell GeForce 6800, 400/1300 Forceware 92.91 drivers

 

250GB Seagate Baracuda 7200.8 7,200RPM SATA NCQ 8MB Cache hdd (ST3250823AS)

 

NEC ND4550A DVD-RAM SuperMulti Drive 2MB Cache

 

Tagan TG530-U15 530w ATX v2.01 Modular Power Supply

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  311

LDT/FSB Frequency Ratio.......................  -  3x

CPU/FSB Frequency Ratio.......................  -  9x

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  1.500v



CPU VID Control...............................  -  1.325v

CPU VID Special Control.......................  -  113%

LDT Voltage Control...........................  -  1.20v 

Chip Set Voltage Control......................  -  1.50v

DRAM Voltage Control..........................  -  2.70v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  150

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  3

RAS# to CAS# delay (Trcd).....................  -  3

Min RAS# active time (Tras)...................  -  0

Row precharge time (Trp)......................  -  2

Row Cycle time (Trc)..........................  -  7 Bus Clocks

Row refresh cyc time (Trfc)...................  -  13 Bus Clocks

Row to Row delay (Trrd).......................  -  02 Bus Clocks

Write recovery time (Twr).....................  -  02 Bus Clocks

Write to Read delay (Twtr)....................  -  01 Bus Clocks

Read to Write delay (Trwt)....................  -  02 Bus Clocks

Refresh Period (Tref).........................  -  1032 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Weak 4

DRAM Data Drive Strength......................  -  Level 3

Max Async Latency.............................  -  7.0 ns

DRAM Response Time............................  -  Normal

Read Preamble Time............................  -  5.0 ns

IdleCycle Limit...............................  -  16 Cycles

Dynamic Counter...............................  -  Enabled

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

==========

 

SP2004 + 3DMark 2001SE + CPUZ

 

3dmark01sp2004ob8.th.jpg

 

3DMark 03

 

3dmark03lk2.th.jpg

 

3DMark 05

 

3dmark05zz2.th.jpg

 

3DMark 06

3dmark06tc9.th.jpg

 

Aquamark 3

aquamarknv5.th.jpg

 

==========

 

short description:

311 x 9 = 2799MHz, 1.46v

3-3-0-2 @ 2.70 vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY UT NF4 Ultra-D (04/06 BIOS)

 

AMD 165 Opteron dual core CCBBE 0617FPMW w/Big Typhoon

 

2x1024MB G.SKILL F1-4000USU2-2GBHZ PC4000 (Samsung K4H510838C-UCCC)

 

EVGA 7900gs 256, 500/690 94.24 drivers

 

WD2500KS 250GB 7200 RPM SATA 3.0Gb/s RAID0 and 500GB Seagate Barracuda 7200.10 16mb 3GB SATA

 

LITE-ON 16X DVD±R DVD Burner 12X DVD-RAM SATA

 

OCZ 700 Game Xtreme

 

 

==========

 

[b]Genie BIOS Settings:[/b]
[color=red]
FSB Bus Frequency.............................  -  308
LDT/FSB Frequency Ratio.......................  -  3
CPU/FSB Frequency Ratio.......................  -  9
PCI eXpress Frequency.........................  -  100Mhz

CPU VID StartUp Value.........................  -  1.400v

CPU VID Control...............................  -  Auto
CPU VID Special Control.......................  -  Auto
LDT Voltage Control...........................  -  1.20v 
Chip Set Voltage Control......................  -  1.50v
DRAM Voltage Control..........................  -  2.60v[/color]

[b]DRAM Configuration Settings:[/b]
[color=red]
DRAM Frequency Set............................  -  166=RAM/FSB:05/06
Command Per Clock (CPC).......................  -  Enable 
CAS Latency Control (Tcl).....................  -  3
RAS# to CAS# delay (Trcd).....................  -  4
Min RAS# active time (Tras)...................  -  8
Row precharge time (Trp)......................  -  4
Row Cycle time (Trc)..........................  -  9 Bus Clocks
Row refresh cyc time (Trfc)...................  -  16 Bus Clocks
Row to Row delay (Trrd).......................  -  02 Bus Clocks
Write recovery time (Twr).....................  -  03 Bus Clocks
Write to Read delay (Twtr)....................  -  02 Bus Clocks
Read to Write delay (Trwt)....................  -  03 Bus Clocks
Refresh Period (Tref).........................  -  3684 Cycles
DRAM Bank Interleave..........................  -  Enabled

DQS Skew Control..............................  -  Auto
DQS Skew Value................................  -  0
DRAM Drive Strength...........................  -  Auto
DRAM Data Drive Strength......................  -  Auto
Max Async Latency.............................  -  8
DRAM Response Time............................  -  Normal
Read Preamble Time............................  -  5.5
IdleCycle Limit...............................  -  256 Cycles
Dynamic Counter...............................  -  Disable
R/W Queue Bypass..............................  -  16 x
Bypass Max....................................  -  07 x
32 Byte Granularity...........................  -  Disable(4 Bursts)
[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z + Everest 2.20:

 

mainscreennz4.th.png

 

 

3dMark2003:

 

3dmark03ba6.th.png

 

 

3dMark2005:

 

3dmark05zr3.th.png

 

 

 

3dMark 2006:

 

3dmark06li4.th.png

 

 

 

==========

 

 

 

short description:

308x9 @ 2772Mhz, 1.40v cpu voltages

3-4-8-4 @ 2.60v vdimm

Share this post


Link to post
Share on other sites

DFI LanParty UT NF4 Ultra-D

 

AMD Athlon 64 X2 socket939 3800+ (2700Mhz, 270x10)

 

4x512MB Corsair 2Gb XMS3200 Xtreme Pro C2 Series (TWINX1024-3200C2PRO)

 

ATI Radeon X800XL 256Mb PCI-E x16 ATI Display Drivers

 

Western Digital Cavier SE16 SATAII-300 7200RPM 16Mb 250 GB

 

Sony 16X DVD-ROM

 

Corsair HX-620 (620w) Power Supply

 

 

 

 

 

==========

 

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  270

LDT/FSB Frequency Ratio.......................  -  x4

CPU/FSB Frequency Ratio.......................  -  x10

PCI eXpress Frequency.........................  -  105MHZ



CPU VID StartUp Value.........................  -  STARTUP



CPU VID Control...............................  -  1.55v

CPU VID Special Control.......................  -  100%

LDT Voltage Control...........................  -  1.2v

Chip Set Voltage Control......................  -  1.5v

DRAM Voltage Control..........................  -  2.8v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  140=RAM/FSB

Command Per Clock (CPC).......................  -  Enabled

CAS Latency Control (Tcl).....................  -  3

RAS# to CAS# delay (Trcd).....................  -  3

Min RAS# active time (Tras)...................  -  3

Row precharge time (Trp)......................  -  7

Row Cycle time (Trc)..........................  -  13 Bus Clocks

Row refresh cyc time (Trfc)...................  -  16 Bus Clocks

Row to Row delay (Trrd).......................  -  03 Bus Clocks

Write recovery time (Twr).....................  -  03 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Weak4

DRAM Data Drive Strength......................  -  Level1

Max Async Latency.............................  -  8

DRAM Response Time............................  -  fast

Read Preamble Time............................  -  5.5

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Enabled

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(8 Bursts)

[/color]

 

 

 

==========

 

Orthos + 3dMark2001SE + 2x CPU-Z:

 

ocdbentry3dmark01orthosak8.th.png

 

 

3dMark2003:

 

3dmark03nx5.th.png

 

 

3dMark2005:

 

3dmark05lx5.th.png

 

 

3dMark2006:

 

3dmark06he9.th.png

 

 

==========

 

 

 

short description:

270x10 @ 2700mhz - 1.55vcore (1.55v*100%)

3.0-3-3-7 @ 2.8vdimm

Share this post


Link to post
Share on other sites
Guest LookBackX2

DFI LANPARTY CFX3200-DR (5/23/2006 Beta)

 

AMD Opteron 170UP

 

2x1024MB TeamGroup Xtreem Cronus DDR500

 

EVGA 8800 GTS 320 Superclocked

 

3Ware 8506-4L PCI-X/PCI HD Controller, 3x Seagate Barracuda 320GB Raid 5

 

Samsung Writemaster DVD Burner w/Lightscribe

 

CM Stacker 810 w/homebrew watercooling

 

*

*

==========

[B]Genie BIOS Settings:[/B]
[COLOR=red]
FSB Bus Frequency.............................  -  301
LDT/FSB Frequency Ratio.......................  -  3
CPU/FSB Frequency Ratio.......................  -  10
RD580 HT PLL Speed............................  -  auto
HT Bus MMOS Drive Strength....................  -  31
HT Bus PMOS Drive Strength....................  -  31
HT Bus Receiever Impedance....................  -  31
CPU HT Bus Drive Strength.....................  -  strong
CPU VID Control...............................  -  1.525v
CPU VID Special Control.......................  -  Above VID * 102.3%
DRAM Voltage Control..........................  -  2.65v
SB PCIE Voltage...............................  -  1.85v
NB Analog Voltage.............................  -  1.34v
LDT Bus Voltage...............................  -  1.34v 
NB Core Voltage...............................  -  1.34v
[/COLOR]

[B]DRAM Configuration Settings:[/B]
[COLOR=red]
DRAM Frequency Set............................  -  166
Command Per Clock (CPC).......................  -  Enabled
CAS Latency Control (Tcl).....................  -  3
RAS# to CAS# delay (Trcd).....................  -  3
Min RAS# active time (Tras)...................  -  0
Row precharge time (Trp)......................  -  3
Row Cycle time (Trc)..........................  -  7
Row refresh cyc time (Trfc)...................  -  14
Row to Row delay (Trrd).......................  -  2
Write recovery time (Twr).....................  -  2
Write to Read delay (Twtr)....................  -  2
Read to Write delay (Trwt)....................  -  3
Refresh Period (Tref).........................  -  3120
DRAM Bank Interleave..........................  -  Enabled
Errata 94 Enhancement.........................  -  Disable
Errata 123 Enhancement........................  -  auto
Odd Divisor Correct...........................  -  Disable

DQS Skew Control..............................  -  Increase
DQS Skew Value................................  -  155
DRAM Drive Strength...........................  -  9
DRAM Data Drive Strength......................  -  Level 1 (Reduce 50%)
DIMM 1/3 Clock Timing Skew....................  -  auto
DIMM 2/4 Clock Timing Skew....................  -  Delay  300ps
Max Async Latency.............................  -  8
Read Preamble Time............................  -  6
IdleCycle Limit...............................  -  16 Cycles
Dynamic Counter...............................  -  Disable
R/W Queue Bypass..............................  -  16 x
Bypass Max....................................  -  7 x
Burst Length..................................  -  4 Bursts
[/COLOR]

 

==========

 

Prime95 + 3dMark2001SE + CPU-Z 1.35 + Everest 2.20:

thumb_3010_3dm01___Orthos_9hrs.jpg

 

3dMark2003:

 

thumb_3010_3dm03.jpg

 

 

3dMark2005:

 

thumb_3010_3dm05.jpg

 

 

3dMark2006:

 

 

thumb_3010_3dm06.jpg

 

Aquamark 3d:

 

thumb_3010_AquaMark.jpg

 

Everest Home Edition 2.20:

 

 

thumb_3010_250Mem_Everest_Read.jpg

==========

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra D (7/04-2BTA BIOS)

 

Opteron 175 CCBBE 0617

 

2x1024MB OCZ PC4000 EB (OCZ5001024EBPE)

 

EVGA 880GTS 640MB, 675/1024 163.44 drivers

 

3 X Barracuda SATA 7200.10 250GB RAID 0

 

Benq DW 1655 DVD

 

OCZ GameXstream 600W

 

 

 

*

*

*

*

 

==========

 

[Genie BIOS Settings:]



FSB Bus Frequency.............................  -  282

LDT/FSB Frequency Ratio.......................  -  3X

CPU/FSB Frequency Ratio.......................  -  11X

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  Auto



CPU VID Control...............................  -  1.475

CPU VID Special Control.......................  -  Auto

LDT Voltage Control...........................  -  1.30v 

Chip Set Voltage Control......................  -  1.60v

DRAM Voltage Control..........................  -  2.6v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  180

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  3

RAS# to CAS# delay (Trcd).....................  -  3

Min RAS# active time (Tras)...................  -  8

Row precharge time (Trp)......................  -  2

Row Cycle time (Trc)..........................  -  10 Bus Clocks

Row refresh cyc time (Trfc)...................  -  16 Bus Clocks

Row to Row delay (Trrd).......................  -  03 Bus Clocks

Write recovery time (Twr).....................  -  02 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3072 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Normal 4

DRAM Data Drive Strength......................  -  2

Max Async Latency.............................  -  8ns

DRAM Response Time............................  -  Normal

Read Preamble Time............................  -  6ns

IdleCycle Limit...............................  -  32 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z + Everest 2.20:

 

ocdb1oa1.th.jpg

 

 

3dMark2003:

 

ocdb23d03yh1.th.jpg

 

3dMark2005:

 

ocdb3d05ps6.th.jpg

 

(For some reason, the score isn't showing up on the screen. I had to upload to ORB to see the score)

 

3dMark 2006:

 

ocdb3d06or6.th.jpg

 

 

 

==========

 

 

 

short description:

282 X 11 @ 3102Mhz, 1.475 cpu voltages

3-3-8-2 @ 2.60v vdimm

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...