Jump to content
Sign in to follow this  
Angry_Games

Socket 939 Overclocking Database

Recommended Posts

DFI LANPARTY nF4 UT Ultra-D (7/04-2BTA BIOS)

 

AMD Opteron 165 CCBBE 0617FPMW

 

Zalman 9700CNPS LED Heatsink

 

2x1024MB OCZ EL Platinum PC3200 OCZ4002048ELDCPE-K

 

XFX GeForce 7900GS, 525/1500 93.71 drivers

 

160GB SAMSUNG SpinPoint P Series SP1614C 7200RPM SATA150 Hard Drive

 

Lite-On CD Burner

 

Corsair 620W Power Supply

 

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  300

LDT/FSB Frequency Ratio.......................  -  x3

CPU/FSB Frequency Ratio.......................  -  x9

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  Auto



CPU VID Control...............................  -  1.35v

CPU VID Special Control.......................  -  Auto

LDT Voltage Control...........................  -  1.30v 

Chip Set Voltage Control......................  -  1.60v

DRAM Voltage Control..........................  -  2.80v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  150=RAM/FSB:03/04

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  3

RAS# to CAS# delay (Trcd).....................  -  3

Min RAS# active time (Tras)...................  -  8

Row precharge time (Trp)......................  -  3

Row Cycle time (Trc)..........................  -  13 Bus Clocks

Row refresh cyc time (Trfc)...................  -  17 Bus Clocks

Row to Row delay (Trrd).......................  -  03 Bus Clocks

Write recovery time (Twr).....................  -  03 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Normal 4

DRAM Data Drive Strength......................  -  Level 2

Max Async Latency.............................  -  8.0ns

DRAM Response Time............................  -  Normal

Read Preamble Time............................  -  6.0ns

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Orthos + 3dMark2001SE + CPU-Z:

 

thumb_Orthos_+_CPUZ_+_3DMark2001.JPG

 

3dMark2003:

 

thumb_3DMark03.JPG

 

3dMark2005:

 

thumb_3DMark05.JPG

 

3dMark 2006:

 

thumb_3DMark06.JPG

 

 

 

==========

 

 

 

short description:

300*9 @ 2.70Ghz, 1.35v

DDR450 3-3-8-3 @ 2.80v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 SLI-DR - BIOS 704-2BTA

AMD Opteron 170 2x1MB L2 Cache, CCBBE 0615DPMW Stepping

Mushkin XP4000 2x1GB DDR500 Redline, Model 991493

Mushkin XP-650 PSU, Model 550100

MSI NX7900GT-VT2D256E-HD Geforce 256MB PCI-E x16 Video Card

2x Seagate Barracuda 320GB 7200RPM SATA 3.0GB/s 16MB Cache HDD

Creative X-Fi XtremeMusic PCI Sound Card

Sony Black 1.44MB 3.5" Internal Floppy Drive

Sony Black IDE DVD-ROM, Model DDU1615/B2s

Plextor 16x DVD-/+R DVD Burner IDE, Model PX-716A

 

 

Genie BIOS Settings:



FSB Bus Frequency.............................  -  328

LDT/FSB Frequency Ratio.......................  -  x3.0

CPU/FSB Frequency Ratio.......................  -  9.0

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  Startup



CPU VID Control...............................  -  1.350v

CPU VID Special Control.......................  -  Above VID *110%

LDT Voltage Control...........................  -  1.20v 

Chip Set Voltage Control......................  -  1.50v

DRAM Voltage Control..........................  -  2.70v



DRAM Configuration Settings:



DRAM Frequency Set............................  -  166=RAM/FSB:05/06

Command Per Clock (CPC).......................  -  Enabled 

CAS Latency Control (Tcl).....................  -  03 Bus Clocks

RAS# to CAS# delay (Trcd).....................  -  03 Bus Clocks

Min RAS# active time (Tras)...................  -  07 Bus Clocks

Row precharge time (Trp)......................  -  03 Bus Clocks

Row Cycle time (Trc)..........................  -  07 Bus Clocks

Row refresh cyc time (Trfc)...................  -  14 Bus Clocks

Row to Row delay (Trrd).......................  -  02 Bus Clocks

Write recovery time (Twr).....................  -  02 Bus Clocks

Write to Read delay (Twtr)....................  -  01 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

Write CAS Latency (Twcl)......................  -  Auto

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Weak 3

DRAM Data Drive Strength......................  -  Level 1

Max Async Latency.............................  -  8

DRAM Response Time............................  -  Normal

Read Preamble Time............................  -  6

IdleCycle Limit...............................  -  16 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

 

 

 

Orthos + CPU-Z + 3DMark2001SE:

 

scene1sq1.th.jpg

 

3DMark2003:

 

scene2nc1.th.jpg

 

3DMark2005:

 

scene3ec6.th.jpg

 

3DMark2006:

 

scene4ka8.th.jpg

 

 

Short Description:

328x9 @ 2952Mhz, 1.350v *110%

268.4MHz 3-3-7-3 @ 2.7v vdimm

Share this post


Link to post
Share on other sites

Asus A8N SLI Preminum (1011-006 Bios)

 

AMD x2 4200 CDBHE 0524 RPMW

 

ThermalRight XP-90 Heatsink Panaflo H1b 92mm fan

 

2x512MB Xerox Micron 5B G

 

XFX 6800Xtreem, 400/1201 ForceWare 83.90's

 

320gb Seagate ST3320620AS 7200rpm 16mb cache Sata II

 

Lite-On DVDRW SHOW-1693S

 

Corsair HX520w PSU

 

 

 

BIOSshot.jpg

 

BIOSshotb.jpg

 

BIOSshotc.jpg

 

 

==========

 

 

Advanced BIOS Settings:

Overclock Profile............................... - Manual

x Overclock Options........................... - Disabled

x N.O.S. Option................................. - Disabled

CPU Frequency.................................. - 228

PCI Express Clock.............................. - 101MHz

DDR Voltage..................................... - Auto

Chipset Voltage................................. - +1.5v

HT Voltage....................................... - +1.20v

CPU Multiplier.................................... - x11

CPU Voltage...................................... - 1.425v

PCI Clock Syncronization Mode............. - 33.33MHz

 

DRAM Configuration:

Memclock Timing Mode....................... - Manual

Memclock Index Value........................ - 333

CAS# Latency TCL............................ - 2.5

TRAS.............................................. - 7T

TRCD.............................................. - 3T

TRP................................................ - 3T

TRC................................................ - 11T

TRFC.............................................. - 19T

TRWT............................................. - 4T

TWR.............................................. - 3T

Memory Timing (CPC)........................ - 1T

S/W DRAM Over 4G Remapping............ - Diasbled

H/W DRAM Over 4G Remapping............ - Disabled

 

Hyper Transport Frequency................ - Auto

AMD Cool'n'Quiet control.................... - Disabled

 

 

 

 

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z + Everest 2.20:

 

Orthos.jpg

 

 

3dMark2003:

 

3DMark03.jpg

 

 

3dMark2005:

 

 

3Dmark05.jpg

 

 

3dMark 2006:

 

 

3D06.jpg

 

 

==========

 

 

 

short description:

238x11 @ 2500Mhz, Vcore 1.425v

2.5-3-3-7 @ Auto vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Expert (4/6/06 BIOS)

 

165 Optron CCBBE 0617FPMW – Storm Rev.2

 

2x1024MB OCZ PC3200 EL Platinum (OCZ4002048ELDCPE-K)

 

BFG 7600GT OC SLI, 562/1444 93.71 drivers

 

2x 160GB Western Digital SATA II HDD – Raid 0

 

LITE-ON DVDRW SHM-165H6S

 

Ultra X Connect2 550W PSU

 

 

 

*

*

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  305

LDT/FSB Frequency Ratio.......................  -  x3

CPU/FSB Frequency Ratio.......................  -  x9

PCI eXpress Frequency.........................  -  105MHz



CPU VID StartUp Value.........................  -  Startup



CPU VID Control...............................  -  1.400V

CPU VID Special Control.......................  -  114.4%

LDT Voltage Control...........................  -  1.30v 

Chip Set Voltage Control......................  -  1.72v

DRAM Voltage Control..........................  -  2.80v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  166=RAM/FSB:05/06

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  03 Bus Clocks

RAS# to CAS# delay (Trcd).....................  -  03 Bus Clocks

Min RAS# active time (Tras)...................  -  00 Bus Clocks

Row precharge time (Trp)......................  -  02 Bus Clocks

Row Cycle time (Trc)..........................  -  07 Bus Clocks

Row refresh cyc time (Trfc)...................  -  13 Bus Clocks

Row to Row delay (Trrd).......................  -  02 Bus Clocks

Write recovery time (Twr).....................  -  02 Bus Clocks

Write to Read delay (Twtr)....................  -  01 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Level 08

DRAM Data Drive Strength......................  -  Level 1

Max Async Latency.............................  -  7.0 ns

DRAM Response Time............................  -  Normal

Read Preamble Time............................  -  6.5 ns

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Orthos + 3dMark2001SE (31620) + CPU-Z + Everest 3.50.761:

 

2745mhz01cy3.th.jpg

 

3dMark2003 (23221):

 

2745mhz03tg8.th.jpg

 

 

3dMark2005 (11363):

 

2745mhz05pj5.th.jpg

 

 

 

3dMark 2006 (5958):

 

2745mhz06bn7.th.jpg

 

 

 

==========

 

 

 

short description:

305x9 @ 2745MHz, 1.60V

3-3-0-2 @ 2.80V vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D (7/04-2BTA BIOS)

 

AMD Opteron 185 dual core

 

4x1024MB Kingston HyperX PC3200 1GB (2x KHX3200AK2/2G)

 

POV 8800GTX, 621/1458/1998 101.70 drivers

 

2x500GB Seagate 7200.9 sata-2 + 1x 160GB Seagate 7200.8 sata + 1x Hitachi 250GB sata

 

NEC Silver DVD+/-RW/RAM ND-4550A

 

Enermax Liberty 500w Power Supply

 

case: Coolermaster Stacker

 

CPU Cooler:"Thermaltake Big Typhoon + AS5

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  231

LDT/FSB Frequency Ratio.......................  -  Auto

CPU/FSB Frequency Ratio.......................  -  Auto

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  Auto



CPU VID Control...............................  -  1.300v

CPU VID Special Control.......................  -  Auto

LDT Voltage Control...........................  -  1.20v 

Chip Set Voltage Control......................  -  1.50v

DRAM Voltage Control..........................  -  2.50v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  180=RAM/FSB:09/10

Command Per Clock (CPC).......................  -  Auto 

CAS Latency Control (Tcl).....................  -  Auto

RAS# to CAS# delay (Trcd).....................  -  Auto

Min RAS# active time (Tras)...................  -  Auto

Row precharge time (Trp)......................  -  Auto

Row Cycle time (Trc)..........................  -  Auto

Row refresh cyc time (Trfc)...................  -  Auto

Row to Row delay (Trrd).......................  -  Auto

Write recovery time (Twr).....................  -  Auto

Write to Read delay (Twtr)....................  -  Auto

Read to Write delay (Trwt)....................  -  Auto

Refresh Period (Tref).........................  -  Auto

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Auto

DRAM Data Drive Strength......................  -  Auto

Max Async Latency.............................  -  Auto

DRAM Response Time............................  -  Normal

Read Preamble Time............................  -  Auto

IdleCycle Limit...............................  -  Auto

Dynamic Counter...............................  -  Auto

R/W Queue Bypass..............................  -  Auto

Bypass Max....................................  -  Auto

32 Byte Granularity...........................  -  Auto

[/color]

 

 

==========

 

 

Orthos + CPU-Z + 3dMark2001SE : 28411

 

3dmark01cpuzorthosjk1.th.jpg

 

 

3dMark2003: 36358

 

3dmark03tc6.th.jpg

 

 

3dMark2005: 15306

 

3dmark05jm1.th.jpg

 

 

3dMark 2006: 10191

 

3dmark06pz1.th.jpg

 

 

 

==========

 

 

 

short description:

231x13 @ 3Ghz, cpu undervolted

3-3-7-2.5, 2t @ 2.60v vdimm

 

Don't bust my nuts over the poor 3dmark scores, I'm running Vista Ultimate64

Gameperformance is pretty good.

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra D (7/04-2BTA BIOS)

 

FX 60 Toledo CCB2E 0608

 

2x1024MB OCZ PC4000 EB (OCZ5001024EBPE)[2048MB]

 

XFX GeForce 7900GTX, 650/1600 91.31 drivers

 

2 X Barracuda SATA 7200.10 250GB RAID 0

 

Benq DW 1655 DVD

 

OCZ GameXstream 600W

 

 

 

*

*

*

*

 

==========

 

[Genie BIOS Settings:]



FSB Bus Frequency.............................  -  215

LDT/FSB Frequency Ratio.......................  -  5X

CPU/FSB Frequency Ratio.......................  -  14X

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  Auto



CPU VID Control...............................  -  1.55

CPU VID Special Control.......................  -  Auto

LDT Voltage Control...........................  -  1.30v 

Chip Set Voltage Control......................  -  1.60v

DRAM Voltage Control..........................  -  2.6v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  250

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  3

RAS# to CAS# delay (Trcd).....................  -  3

Min RAS# active time (Tras)...................  -  8

Row precharge time (Trp)......................  -  2

Row Cycle time (Trc)..........................  -  10 Bus Clocks

Row refresh cyc time (Trfc)...................  -  16 Bus Clocks

Row to Row delay (Trrd).......................  -  03 Bus Clocks

Write recovery time (Twr).....................  -  02 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3072 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Normal 4

DRAM Data Drive Strength......................  -  2

Max Async Latency.............................  -  8ns

DRAM Response Time............................  -  Normal

Read Preamble Time............................  -  6ns

IdleCycle Limit...............................  -  32 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z + Everest 2.20:

 

fx601vp0.th.jpg

 

 

3dMark2003:

 

fx603dmark03pd5.th.jpg

 

 

3dMark2005:

 

fx603dmark05is4.th.jpg

 

 

 

3dMark 2006:

 

fx603dmark06fl2.th.jpg

 

 

 

 

==========

 

 

 

short description:

215 X 14 @ 3010Mhz, 1.55 cpu voltages

3-3-8-2 @ 2.60v vdimm

Share this post


Link to post
Share on other sites

DFI NF4 SLI-DR @ 2700MHz – XP Pro 32-Bit

 

DFI LANPARTY nF4 SLI-DR, Tony’s 704-2bta w/MemTest 1.70+ by Tmod

 

AMD Socket 939 X2 3800+ Dual Core (ADA3800DAA5CD LCBKE0643TPMW)

 

2x 512 Corsair CMX512-3200XL (XMS3208v1.1)

 

PowerColor x800gto, Catalyst 7.3 drivers

 

Hitachi HDT722525DLA380 250G SATA 3.0

 

NEC-3550A DVD R/RW Silver

 

Antec 550 Trio PSU

 

Stock AMD Opteron Heatpipe HeatSink

 

Antec Super LanBoy

 

*

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 270

LDT/FSB Frequency Ratio - 3.0

CPU/FSB Frequency Ratio - x10

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - AUTO

 

CPU VID Control - 1.4v

CPU VID Special Control - Above VID * 110%

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.50v

DRAM Voltage Control - 2.80v

 

DRAM Configuration Settings:

DRAM Frequency Set - 140=RAM/FSB:07/10

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2.0

RAS# to CAS# delay (Trcd) - 02 Bus Clocks

Min RAS# active time (Tras) - 06 Bus Clocks

Row precharge time (Trp) - 02 Bus Clocks

Row Cycle time (Trc) - 11 Bus Clocks

Row refresh cyc time (Trfc) - 14 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 01 Bus Clocks

Read to Write delay (Trwt) - 04 Bus Clocks

Refresh Period (Tref) - 3120 Cycles

Write CAS Latency (Twcl) - 01 Bus Clocks

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 4 Normal

DRAM Data Drive Strength - Level 3

Max Async Latency - 8.0 Nano Seconds

DRAM Response Time - Normal

Read Preamble Time - 6.0 Nano Seconds

IdleCycle Limit - 256 Cycles

Dynamic Counter - Enabled

R/W Queue Bypass - 08 x

Bypass Max - 04 x

32 Byte Granularity - Disable (4 Bursts)

 

==========

 

Orthos + 3dMark2001SE + CPU-Z 1.39:

orthos13jb5.th.jpg

 

3dMark2003:

3d05nm1.th.jpg

 

3DMark2005:

3d05nm1.th.jpg

 

3DMark 2006

 

3d06rm2.th.jpg

 

==========

 

short description:

270 x 10 = 2700MHz

2-2-6-2 @ 2.80 vdimm

Share this post


Link to post
Share on other sites

This entry is in tribute to a bro who isn't able to do it himself right now.

It will be waiting for you with these settings saved but you still need a better power supply. :tooth: This poor ram is begging me for some more voltage. :rolleyes: Here is to thinking about you bud :beer :beer :beer :beer no smiley for skotch so beer will have to do. :shake:

 

 

DFI LANPARTY nF4 ultra-d modded to sli-d (7/04-2BTA BIOS)

 

AMD opteron 146 (cab1e 0614epaw)alpine 64 cooler

 

2x512MB OCZ Value VX

 

Nvidia GeForce 6600 Vanilla, 300/500 93.71 x64 drivers

 

2x320GB Western Digital 7200RPM SATA hdd

 

Lite-on 16xDVD Burner with Litescribe

 

Okia 450 Power Supply

 

X-Blade case

 

 

*

*

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  300

LDT/FSB Frequency Ratio.......................  -  x3

CPU/FSB Frequency Ratio.......................  -  10

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  auto



CPU VID Control...............................  -  1.45

CPU VID Special Control.......................  -  Auto

LDT Voltage Control...........................  -  1.20v 

Chip Set Voltage Control......................  -  1.50v

DRAM Voltage Control..........................  -  2.90v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  133=RAM/FSB:2/3

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  2

RAS# to CAS# delay (Trcd).....................  -  2

Min RAS# active time (Tras)...................  -  5

Row precharge time (Trp)......................  -  2

Row Cycle time (Trc)..........................  -  11 Bus Clocks

Row refresh cyc time (Trfc)...................  -  17 Bus Clocks

Row to Row delay (Trrd).......................  -  03 Bus Clocks

Write recovery time (Twr).....................  -  03 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  normal level 4

DRAM Data Drive Strength......................  -  level 2

Max Async Latency.............................  -  10ns

DRAM Response Time............................  -  Normal

Read Preamble Time............................  -  8ns

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  04 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Stress Prime 2004 + 3dMark2001SE + CPU-Z:

 

stressprime3d01az9.th.jpg

 

 

3dMark2003 + Everest:

 

3d03ee6.th.jpg

 

3dMark2005:

 

3d05hw3.th.jpg

 

 

3dMark 2006:

 

3d06px9.th.jpg

 

 

 

==========

 

 

 

short description:

air cooled with artic cooling in an X-Blade case

300x10 @ 3000Mhz, 1.45 cpu voltages

200fsb @ 2-2-5-2 @ 2.90v vdimm

Share this post


Link to post
Share on other sites

DFI Lanparty UT NF4 ULTRA

 

AMD Opteron 170 [email protected]

 

2x1024MB G.Skill PC3200 3.4.4.8

 

EVGA 8800GTS 320Mb 600/900

 

Seagate 200Gb SATA II

 

LG Combo Drive

 

Thermaltake Toughpower 600W

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  285

LDT/FSB Frequency Ratio.......................  -  x3

CPU/FSB Frequency Ratio.......................  -  x9

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  Startup



CPU VID Control...............................  -  Auto

CPU VID Special Control.......................  -  Auto

LDT Voltage Control...........................  -  1.30v 

Chip Set Voltage Control......................  -  1.60v

DRAM Voltage Control..........................  -  2.60v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  140=RAM/FSB:07/10

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  3

RAS# to CAS# delay (Trcd).....................  -  4

Min RAS# active time (Tras)...................  -  8

Row precharge time (Trp)......................  -  4

Row Cycle time (Trc)..........................  -  7 Bus Clocks

Row refresh cyc time (Trfc)...................  -  auto

Row to Row delay (Trrd).......................  -  02 Bus Clocks

Write recovery time (Twr).....................  -  02 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Auto

DRAM Data Drive Strength......................  -  Auto

Max Async Latency.............................  -  Auto

DRAM Response Time............................  -  Fast

Read Preamble Time............................  -  Auto

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z + Everest 2.20:

 

OrthosCPUZ3DMark012.jpg

 

 

3dMark2003:

 

3DMark03.jpg

 

 

3dMark2005:

 

3DMark05.jpg

 

 

 

3dMark 2006:

 

3DMark06.jpg

 

 

 

==========

 

 

 

short description:

285x9 @ 2565MHz, Auto cpu voltages

3-4-8-4 @ 2.60v vdimm

Share this post


Link to post
Share on other sites

DFI Lanparty UT NF4 Expert

 

AMD Opteron144 Venus CAB1E 0614 BPBW

 

2x1Gb OCZ EL Platinum PC 3200 @ 500Mhz 2.5-3-3-6

 

2xBFG 7600gt OC SLI @ 580/1450

 

250gb Western Digital Sata2

 

Antec Neopower 480 Watt

 

Cooled By: XP-120

 

Thermaltake Tsunami Black with Window

 

LG L1952TX (Digital)

 

Logitech X-540 Surround

 

 

*

*

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  334

LDT/FSB Frequency Ratio.......................  -  x3.0

CPU/FSB Frequency Ratio.......................  -  x9.0

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  Startup



CPU VID Control...............................  -  1.350

CPU VID Special Control.......................  -  x114.4%

LDT Voltage Control...........................  -  1.20v 

Chip Set Voltage Control......................  -  1.52v

DRAM Voltage Control..........................  -  2.71v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  150=RAM/FSB:03/04

Command Per Clock (CPC).......................  -  Enabled 

CAS Latency Control (Tcl).....................  -  2.5

RAS# to CAS# delay (Trcd).....................  -  3

Min RAS# active time (Tras)...................  -  6

Row precharge time (Trp)......................  -  3

Row Cycle time (Trc)..........................  -  12 Bus Clocks

Row refresh cyc time (Trfc)...................  -  14 Bus Clocks

Row to Row delay (Trrd).......................  -  2

Write recovery time (Twr).....................  -  2

Write to Read delay (Twtr)....................  -  2

Read to Write delay (Trwt)....................  -  2

Refresh Period (Tref).........................  -  3120

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Auto

DRAM Data Drive Strength......................  -  Auto

Max Async Latency.............................  -  8.0 Nano Seconds

DRAM Response Time............................  -  Fastest

Read Preamble Time............................  -  5.0

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Enable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  04 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

SP2004 + 3dMark2001SE + CPU-Z:

 

t549392_OCDB3006Ghz.JPG

 

 

3dMark2003:

 

 

 

 

3dMark2005:

 

 

3dMark 2006:

 

 

 

==========

 

 

 

short description:

334x09, 3006Ghz, 1.544vcore

2x1024, 3:4, 2.71vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Expert(OCZ Tony's EX406BTA 04/06/2006)

 

Opteron 64 144

 

2x1024MB OCZ PC3200EL (OCZ4001024ELPE)

 

2XBFG GeForce 7600GT OC SLI, 580/1450 93.81 drivers

 

36GB Western Digital Raptor 10,000RPM SATA hdd

 

LG DVDRAM GSA-4163B

 

NeoPower 480 Watt

 

 

 

 

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  334

LDT/FSB Frequency Ratio.......................  -  X 3.0

CPU/FSB Frequency Ratio.......................  -  X 9.0

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  Auto



CPU VID Control...............................  -  1.350

CPU VID Special Control.......................  -  114.4%

LDT Voltage Control...........................  -  1.20v 

Chip Set Voltage Control......................  -  1.52v

DRAM Voltage Control..........................  -  2.71v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  150=RAM/FSB:03/04

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  2.5

RAS# to CAS# delay (Trcd).....................  -  3

Min RAS# active time (Tras)...................  -  6

Row precharge time (Trp)......................  -  3

Row Cycle time (Trc)..........................  -  12 Bus Clocks

Row refresh cyc time (Trfc)...................  -  14 Bus Clocks

Row to Row delay (Trrd).......................  -  02 Bus Clocks

Write recovery time (Twr).....................  -  02 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  02 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Auto

DRAM Data Drive Strength......................  -  Auto

Max Async Latency.............................  -  8.0 Nano Seconds

DRAM Response Time............................  -  Fastest

Read Preamble Time............................  -  5.0 Nano Seconds

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Enable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  04 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z + Everest 2.20:

 

t550404_OCDB3006Ghz.JPG

 

3dMark2003:

 

3dmark033006ghzcr1.th.jpg

 

 

3dMark2005:

 

t550714_3DMark053.006Ghz.JPG

 

 

 

3dMark 2006:

 

t550896_3DMark063.006GHz.JPG

 

 

 

==========

 

 

 

short description:

334x09 @ 3006Mhz,1.35 114.4%

2.5-3-3-6 @ 2.71v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Expert(OCZ Tony's EX406BTA 04/06/2006)

 

Opteron 64 144 CAB1E 0614 BPBW

 

2x1024MB OCZ PC3200EL (OCZ4001024ELPE)

 

2XBFG GeForce 7600GT OC SLI, 580/1450 93.81 drivers

 

36GB Western Digital Raptor 10,000RPM SATA hdd

 

LG DVDRAM GSA-4163B

 

NeoPower 480 Watt

 

 

 

 

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  334

LDT/FSB Frequency Ratio.......................  -  X 3.0

CPU/FSB Frequency Ratio.......................  -  X 9.0

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  Auto



CPU VID Control...............................  -  1.350

CPU VID Special Control.......................  -  114.4%

LDT Voltage Control...........................  -  1.20v 

Chip Set Voltage Control......................  -  1.52v

DRAM Voltage Control..........................  -  2.71v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  150=RAM/FSB:03/04

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  2.5

RAS# to CAS# delay (Trcd).....................  -  3

Min RAS# active time (Tras)...................  -  6

Row precharge time (Trp)......................  -  3

Row Cycle time (Trc)..........................  -  12 Bus Clocks

Row refresh cyc time (Trfc)...................  -  14 Bus Clocks

Row to Row delay (Trrd).......................  -  02 Bus Clocks

Write recovery time (Twr).....................  -  02 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  02 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Auto

DRAM Data Drive Strength......................  -  Auto

Max Async Latency.............................  -  8.0 Nano Seconds

DRAM Response Time............................  -  Fastest

Read Preamble Time............................  -  5.0 Nano Seconds

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Enable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  04 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

SP2004 + 3dMark2001SE + CPU-Z + Everest 2007 Ultimate:

 

ocdb3006ghzcp8.th.jpg

 

3dMark2003:

 

3dmark033006ghzcr1.th.jpg

 

 

3dMark2005:

 

3dmark053006ghzgw5.th.jpg

 

 

3dMark 2006:

 

3dmark063006ghzqd0.th.jpg

 

 

==========

 

 

 

short description:

334x09 @ 3006Mhz,1.35 Vlts + 114.4%

2.5-3-3-6 @ 2.71v vdimm

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...