Daddyjaxx Posted September 18, 2006 Posted September 18, 2006 DFI LANPARTY Expert 4/16/06 BIOS AMD Athlon64 X2 4400+ dual-core (Toledo) 2x1024MB GSkill PC4000HZ 2 x 7900GT KO SC (650/1500), WHQL 91.33 3 x 74GB Raptor 10k RAID0, 160GB Samsung HP 16x DVD+R D/L OCZ 700w GameXstream SLI Watercooled TDX, 2 x Maze 4 Acetal, Maze 4 Chipset, Double H/C, D5, Primoflex ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 246 LDT/FSB Frequency Ratio....................... - 4 CPU/FSB Frequency Ratio....................... - 11 PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - 1.5 CPU VID Control............................... - 1.525V CPU VID Special Control....................... - Auto LDT Voltage Control........................... - 1.20v Chip Set Voltage Control...................... - 1.50v DRAM Voltage Control.......................... - 2.62v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 200=RAM/FSB:00/01 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 3.0 RAS# to CAS# delay (Trcd)..................... - 3 Min RAS# active time (Tras)................... - 7 Row precharge time (Trp)...................... - 3 Row Cycle time (Trc).......................... - 7 Bus Clocks Row refresh cyc time (Trfc)................... - Auto Row to Row delay (Trrd)....................... - 02 Bus Clocks Write recovery time (Twr)..................... - 02 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 3120 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - Auto DRAM Data Drive Strength...................... - Auto Max Async Latency............................. - Auto DRAM Response Time............................ - Fast Read Preamble Time............................ - Auto IdleCycle Limit............................... - 256 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 07 x 32 Byte Granularity........................... - Disable(4 Bursts)[/color] ========== Prime 95 + 3dMark2001SE + CPU-Z + Everest 2.20: 3dMark2003: 3dMark2005: 3dMark2006: ========== short description: 246x11 @ 2706Mhz, 1.525v (Default) 3-3-7-3 @ 2.62v vdimm Share this post Link to post Share on other sites More sharing options...
petercintn Posted September 18, 2006 Posted September 18, 2006 Opteron 146 CACJE 0603FPMW DFI LanParty UT Utlra-D 3/29/06 2x1GB Mushkin Black (uccc) OCZ-520ADJ SLI EVGA 7800GT CO 256-P2-N516-AX Thermalright Ultra 120 ========== Genie BIOS Settings: FSB Bus Frequency - 300 LDT/FSB Frequency Ratio - 3 CPU/FSB Frequency Ratio - 10 PCI eXpress Frequency - 100Mhz CPU VID StartUp Value - startup CPU VID Control – 1.475 CPU VID Special Control - *110 LDT Voltage Control - 1.20v Chip Set Voltage Control - 1.50v DRAM Voltage Control - 2.5v Dram + 3 disabled DRAM Configuration Settings: DRAM Frequency Set - 166 (5/6) Command Per Clock (CPC) - Enable CAS Latency Control (Tcl) – 3 RAS# to CAS# delay (Trcd) - 4 Bus Clocks Min RAS# active time (Tras) - 7 Bus Clocks Row precharge time (Trp) - 3 Bus Clocks Row Cycle time (Trc) - 14 Bus Clocks Row refresh cyc time (Trfc) - 16 Bus Clocks Row to Row delay (Trrd) - 2 Bus Clocks Write recovery time (Twr) - 3 Bus Clocks Write to Read delay (Twtr) - 1 Bus Clocks Read to Write delay (Trwt) - 4 Bus Clocks Refresh Period (Tref) - Auto Write CAS Latency (Twcl) - 1 DRAM Bank Interleave - Enabled DQS Skew Control - Auto DQS Skew Value - 0 DRAM Drive Strength - auto DRAM Data Drive Strength - auto Max Async Latency - 10 DRAM Response Time - Fast Read Preamble Time – 8.5 IdleCycle Limit - 16 Cycles Dynamic Counter - enable R/W Queue Bypass - 8 x Bypass Max - 04 x 32 Byte Granularity - Disable(4 Bursts) ========== Prime95 8hr & 3DMark2001 3dmark03 3dmark05 3dmark06 Everest Aquamark Temps from MBM5 Hi/Lo (Thanks Carl) short description: 300x10 @ 3000Mhz, 1.475v + 110% 166 divider 3-4-7-3 @ 2.5vdimm Share this post Link to post Share on other sites More sharing options...
Praz Posted September 19, 2006 Posted September 19, 2006 LANPARTY UT NF4 SLI-DR Venus - 03/07/06 BIOS AMD Opteron 165 CCBBE0610DPMW Mushkin eXtreme Performance 2GB (2 x 1GB) Redline (991493) HIS Radeon X1900 XT IceQ3, 682/824, 6.8 Drivers Hitachi Deskstar T7K250 160GB Serial ATA II 7200RPM Hard Drive w/8MB Buffer x 2 RAID 0 Maxtor Maxline III 7L300S0 300GB Serial ATA 1.5Gb 7200RPM Hard Drive w/16MB Buffer Liteon SOHW-1693S 16X Dual Layer DVD±RW Drive (Black) OCZ GameXStream OCZ700GXSSLI ATX12V 700W Power Supply Swiftech STORM Extreme Performance Universal Water-block - Rev 2 Swiftech MCP655 Pump Black Ice Pro III Triple 120mm Radiator With D12SL-12 YATE LOON 120mm Case Fans Chipset Cooled By Evercool VC-RE VGACooler [b]Genie BIOS Settings:[/b] [color=navy] FSB Bus Frequency..................... 336 LDT/FSB Frequency Ratio............... Auto CPU/FSB Frequency Ratio............... 9x PCI Express Frequency................. 105 CPU VID Startup Value................. 1.350 CPU VID Control....................... 1.450 VID Special Control................... 104.8% LDT Voltage Control................... 1.20V Chip Set Voltage Control.............. 1.52v Dram Voltage Control.................. 2.58v[/color] [b]DRAM Configuration Settings:[/b] [color=darkgreen] Dram Frequency Set (Mhz).............. 166=RAM/FSB:05/06 Command Per Clock (CPC)............... Enable CAS# latency (Tcl).................... 3.0 RAS# to CAS# delay (Trcd)............. 03 Min RAS# active time (Tras)......... . 00 Row Precharge Time (Trp).............. 02 Row Cycle Time (Trc).................. 07 Row refresh timg (Trfc)............... 13 RAS# to RAS# delay (Trrd)............. 00 Write Recovery Time (Twr)............. 02 Wite-to-Read Delay (Twtr)............. 01 Read-to-Write Delay (Trwt)............ 03 Refresh Rate (Tref)................... 3120 Cycles Write CAS Latency (Twcl)...............01 DRAM Bank Interleaving................ Enabled DQS Skew Control...................... Auto DQS Skew Value........................ 0 DRAM Drive Strength................... Level 06 DRAM Data Drive Strength.............. Level 1 Max Asynchronous Latency.............. 08.0 DRAM Response Time.....................Normal Read Preamble Time.................... 04.0 IdleCycle Limit........................08 Dynamic Counter....................... Disable R/W Queue Bypass.......................16X Bypass Max.............................07X 32-Byte Granularity................... Disable (4 bursts) [/color] Prime95 + 3dMark2001SE + CPU-Z 1.36 + Everest 3.00.630: 3dMark2003: 3dMark2005: 3dMark2006: AquaMark short description: 336x9@ 3024Mhz, 1.450v + 104.8% 3-3-2-0 @ 2.58v vdimm Share this post Link to post Share on other sites More sharing options...
Nightwish68 Posted September 19, 2006 Posted September 19, 2006 DFI LANPARTY nF4 Ultra-D vc-re (04/06/2006 BIOS) AMD X2 3800 Manchester LDBFE 0625 GPMW 2x1024MB OCZ EL PC4000 Gold XTC (OCZ5002048ELGEGXT-K) EVGA 7900GT KO, 500/1500 91.47 WHQL drivers 160GB Samsung SATA II hdd 200GB Samsung SATA II hdd 250GB Hitachi SATA II hdd Plextor PX-755A DVD Burner / Plextor PX-130A DVD Player OCZ GameXStream 600W PSU Thermaltake Armor Black Case * * (BIOS screenshots.) * * ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 312 LDT/FSB Frequency Ratio....................... - 3 CPU/FSB Frequency Ratio....................... - 9.0 PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - Startup CPU VID Control............................... - 1.325V CPU VID Special Control....................... - Above VID * 110% LDT Voltage Control........................... - 1.20v Chip Set Voltage Control...................... - 1.50v DRAM Voltage Control.......................... - 2.70v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 166=RAM/FSB:05/06 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 3.0 RAS# to CAS# delay (Trcd)..................... - 4T Min RAS# active time (Tras)................... - 8T Row precharge time (Trp)...................... - 3T Row Cycle time (Trc).......................... - 16 Bus Clocks Row refresh cyc time (Trfc)................... - 24 Bus Clocks Row to Row delay (Trrd)....................... - 03 Bus Clocks Write recovery time (Twr)..................... - 03 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 4708 Cycles Odd Divisor correct........................... - Disable DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - Auto DRAM Data Drive Strength...................... - Auto Max Async Latency............................. - Auto DRAM Response Time............................ - Normal Read Preamble Time............................ - Auto IdleCycle Limit............................... - 256 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 07 x 32 Byte Granularity........................... - Disable(4 Bursts) [/color] ========== Dual Prime95 + 3dMark2001SE + CPU-Z: 3dMark2003: 3dMark2005: 3dMark 2006: Aquamark: Everest: Memory read ========== short description: 312x9 @ 2808Mhz, 1.325 + 110% = 1.458V cpu voltages (cpu-z: 1.424) 3-4-8-3 @ 2.70v vdimm Share this post Link to post Share on other sites More sharing options...
supertux1 Posted September 21, 2006 Posted September 21, 2006 DFI LANPARTY nF4 SLI-DR (7/04-2BTA BIOS) AMD X2 4800+ dual core. IHS removed. 2x1024MB OCZ PC3200 (OCZ4002048ELDCPE-K) XFX GeForce 7950GX2, 570/750 91.47 drivers 2x 36GB Western Digital Raptor 10,000RPM SATA hdd RAID 0 OCZ GamerXStream 700w Power Supply Water Cooled: Swiftech APEX-H20 * * * * ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 239 LDT/FSB Frequency Ratio....................... - Auto CPU/FSB Frequency Ratio....................... - 12 PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - 1.500v CPU VID Control............................... - 1.525 CPU VID Special Control....................... - 110% LDT Voltage Control........................... - 1.30v Chip Set Voltage Control...................... - 1.60v DRAM Voltage Control.......................... - 2.60v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 200=RAM/FSB:01/01 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 2.5 RAS# to CAS# delay (Trcd)..................... - 3 Min RAS# active time (Tras)................... - 5 Row precharge time (Trp)...................... - 2 Row Cycle time (Trc).......................... - 07 Bus Clocks Row refresh cyc time (Trfc)................... - 12 Bus Clocks Row to Row delay (Trrd)....................... - 00 Bus Clock Write recovery time (Twr)..................... - 02 Bus Clocks Write to Read delay (Twtr).................... - 01 Bus Clock Read to Write delay (Trwt).................... - 02 Bus Clocks Refresh Period (Tref)......................... - 3120 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Increase Skew DQS Skew Value................................ - 255 DRAM Drive Strength........................... - Auto DRAM Data Drive Strength...................... - Level 3 Max Async Latency............................. - 6.0ns DRAM Response Time............................ - Fast Read Preamble Time............................ - 4.0ns IdleCycle Limit............................... - 16 Cycles Dynamic Counter............................... - Enable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 07 x 32 Byte Granularity........................... - Disable(4 Bursts) [/color] ========== Prime95 + 3dMark2001SE + CPU-Z + Everest 2.20: 3dMark2003: 3dMark2005: 3dMark 2006: ========== short description: 239x12 @ 2868Mhz, 1.6775v 2.5-3-5-2 @ 2.60v vdimm Share this post Link to post Share on other sites More sharing options...
PhoetuS Posted September 21, 2006 Posted September 21, 2006 DFI LANPARTY UT nF4 Expert (BIOS 12/07/2005) Opteron 170 dual core - IHS Removed 2x1024MB G.Skill PC4000 (F1-4000UBU2-2GBHZ) Sapphire ATI x1900xt, 702/801 Omega 38273 (Cat6.7) 80GBx2 Maxtor DiamondMax10 SATA hdd Raid-0 Plextor PX-740A DVD-RW OCZ 700w GameXStream PSU Swiftech Storm Rev.2 CPU Waterblock Swiftech MCP655 Pump Danger Den Maze4 low Profile GPU Waterblock Black Ice GT Stealth 360 Radiator Evercool VC-RE VGACooler On the Chipset * * * * ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 290 LDT/FSB Frequency Ratio....................... - x3 CPU/FSB Frequency Ratio....................... - x10 PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - StartUp CPU VID Control............................... - 1.500 CPU VID Special Control....................... - 104.8% LDT Voltage Control........................... - 1.20v Chip Set Voltage Control...................... - 1.52v DRAM Voltage Control.......................... - 2.68v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 166=RAM/FSB:05/06 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 03 RAS# to CAS# delay (Trcd)..................... - 04 Min RAS# active time (Tras)................... - 08 Row precharge time (Trp)...................... - 04 Row Cycle time (Trc).......................... - 12 Bus Clocks Row refresh cyc time (Trfc)................... - 16 Bus Clocks Row to Row delay (Trrd)....................... - 02 Bus Clocks Write recovery time (Twr)..................... - 02 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 3120 Cycles Write CAS Latency (Tref)...................... - Auto DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - Level 06 DRAM Data Drive Strength...................... - Level 3(Reduce 15%) Max Async Latency............................. - 08.0 Nano Seconds DRAM Response Time............................ - Normal Read Preamble Time............................ - 06.0 Nano Seconds IdleCycle Limit............................... - 128 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 04 x 32 Byte Granularity........................... - Disable(4 Bursts) [/color] ========== Prime95 + 3dMark2001SE + CPU-Z + Everest 2.90: 3dMark2003: 3dMark2005: 3dMark 2006: Aquamark: ========== short description: 290x10 @ 2900Mhz, 1.572 cpu voltages 3-4-8-4 @ 2.68v vdimm Share this post Link to post Share on other sites More sharing options...
wevsspot Posted September 22, 2006 Posted September 22, 2006 Here we go, lets try again. Originally posted around September 1st, 2006 - but multiple broken links. Hopefully won't have anymore problems. DFI LANPARTY nF4 Ultra-D (0704-2bta BIOS) AMD Athlon64 X2 4800 Toledo Core - Stepping CCBWE 0602BPWM 2x1GB G.Skill PC4000 HZ's PowerColor X1900XT 650/750 CAT 6.3 drivers WD Raptors 2X74GB RAID0 WD Cavier 80GB SATA Backup and Storage LiteOn DVD-RW SOHW-1673S/LiteOn CD-RW LTR-52327S OCZ GamerXStream 700W Power Supply ========== [B]Genie BIOS Settings:[/B] [COLOR=red] FSB Bus Frequency - 275 LDT/FSB Frequency Ratio - 3 LDT Bus Transfer - 16/16 CPU/FSB Frequency Ratio - 10 PCI eXpress Frequency - 100Mhz CPU VID StartUp Value - Startup CPU VID Control - 1.40v CPU VID Special Control - Above VID * 113% LDT Voltage Control - 1.30v Chip Set Voltage Control - 1.60v DRAM Voltage Control - 2.60v DRAM + .03 - Enable[/COLOR] [B]DRAM Configuration Settings:[/B] [COLOR=red] DRAM Frequency Set - 180 = RAM/FSB 9:10 Command Per Clock (CPC) - Enable CAS Latency Control (Tcl) - 3.0 RAS# to CAS# delay (Trcd) - 04 Bus Clocks Min RAS# active time (Tras) - 08 Bus Clocks Row precharge time (Trp) - 04 Bus Clocks Row Cycle time (Trc) - 07 Bus Clocks Row refresh cyc time (Trfc) - 14 Bus Clocks Row to Row delay (Trrd) - 02 Bus Clocks Write recovery time (Twr) - 02 Bus Clocks Write to Read delay (Twtr) - 02 Bus Clocks Read to Write delay (Trwt) - 03 Bus Clocks Refresh Period (Tref) - 3684 Cycles DRAM Bank Interleave - Enabled DQS Skew Control - Auto DQS Skew Value - 0 DRAM Drive Strength - Normal 4 DRAM Data Drive Strength - Level 3 Max Async Latency - 8.0 Nano Seconds DRAM Response Time - Normal Read Preamble Time - 5 Nano Seconds IdleCycle Limit - 256 Cycles Dynamic Counter - Disable R/W Queue Bypass - 16 x Bypass Max - 07 x 32 Byte Granularity - Disable(4 Bursts) [/COLOR] ========== Prime95 + 3dMark2001SE + CPU-Z 1.31 + Everest 2.20: 3dMark2003: 3dMark2005: 3dMark2006: Aquamark 3d: ========== short description: 275x10 @ 2750Mhz, 1.40v + 113% 3.0-4-8-4 @ 2.66v vdimm Share this post Link to post Share on other sites More sharing options...
Kaxx Posted September 22, 2006 Posted September 22, 2006 DFI LANPARTY nF4 SLI-DR (11/14/05 BIOS) AMD 3700+ San Diego KAB2E 0546FPBW 2x1024MB G Skill PC4000 HZ Leadtek 6600TD, 348/501 91.33 drivers 160GB Western Digital SATA 16MB Cache Sony DVD-ROM Sunbeam NUUO 550 Watt Power Supply Thermaltake Big Typhoon HSF 3 120mm Yate Loon cooling fans (1 blowing on my PWM IC) Evercool VC-RE Chipset Cooler ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 273 LDT/FSB Frequency Ratio....................... - Auto CPU/FSB Frequency Ratio....................... - 11 PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - 1.500v CPU VID Control............................... - Auto CPU VID Special Control....................... - 113% LDT Voltage Control........................... - 1.425v Chip Set Voltage Control...................... - 1.50v DRAM Voltage Control.......................... - 2.6v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 180=RAM/FSB:09/10 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 3 RAS# to CAS# delay (Trcd)..................... - 4 Min RAS# active time (Tras)................... - 8 Row precharge time (Trp)...................... - 4 Row Cycle time (Trc).......................... - 7 Bus Clocks Row refresh cyc time (Trfc)................... - 13 Bus Clocks Row to Row delay (Trrd)....................... - 2 Bus Clocks Write recovery time (Twr)..................... - 2 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 3120 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - 7 DRAM Data Drive Strength...................... - 1 Max Async Latency............................. - 8ns DRAM Response Time............................ - Normal Read Preamble Time............................ - 5ns IdleCycle Limit............................... - 256 Cycles Dynamic Counter............................... - enable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 07 x 32 Byte Granularity........................... - Disable(4 Bursts) [/color] ========== Prime95 + 3dMark2001SE + CPU-Z: http://img171.imageshack.us/my.php?image=3...cprime95vy2.png 3dMark2003: http://img175.imageshack.us/my.php?image=3...k03vgaocla0.png 3dMark2005: http://img133.imageshack.us/my.php?image=05vgaochd6.png 3dMark 2006: http://img141.imageshack.us/my.php?image=06vgaocsp1.png ========== short description: 273x11 @ 3003Mhz, 1.425+113% = 1.61 cpu voltage (multimeter reads 1.63 vcore) 3-4-4-8 @250mhz (180 divider) @ 2.60v vdimm Share this post Link to post Share on other sites More sharing options...
oc newbie Posted September 23, 2006 Posted September 23, 2006 This is just a test setup so I could test the board and power supply. Figured I would throw it up to get a few laughs outta everyone. DFI LANPARTY nF4 SLI-DR EXPERT (4/06 BIOS) AMD opteron 146 (cab2e 0604dpaw)Stock POS cooler LOL air cooled 2x1024MB OCZ PC4000GOLDXTC(OCZ5002048ELGEGXT-K) MSI GeForce 6600 Vanilla, 350/500 81.98 drivers 6.4GB Quantum Fireball 5400RPM 512kb cache ide hdd 16xDVD Burner That doesn't burn dvd's Ocz Gamexstream 700w Power Supply * * ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 270 LDT/FSB Frequency Ratio....................... - x4 CPU/FSB Frequency Ratio....................... - 10 PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - Auto CPU VID Control............................... - 1.40 CPU VID Special Control....................... - 104.8 LDT Voltage Control........................... - 1.22v Chip Set Voltage Control...................... - 1.56v DRAM Voltage Control.......................... - 2.66v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 180=RAM/FSB:09/10 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 3 RAS# to CAS# delay (Trcd)..................... - 4 Min RAS# active time (Tras)................... - 8 Row precharge time (Trp)...................... - 3 Row Cycle time (Trc).......................... - 10 Bus Clocks Row refresh cyc time (Trfc)................... - 16 Bus Clocks Row to Row delay (Trrd)....................... - 03 Bus Clocks Write recovery time (Twr)..................... - 03 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 3120 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - 7 DRAM Data Drive Strength...................... - level 2 Max Async Latency............................. - 8ns DRAM Response Time............................ - fast Read Preamble Time............................ - 6ns IdleCycle Limit............................... - 256 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 07 x 32 Byte Granularity........................... - Disable(4 Bursts) [/color] ========== Prime95 + 3dMark2001SE + CPU-Z: 3dMark2003 : 3dMark2005+ Everest: 3dMark 2006: ========== short description: air cooled with stock pos/vc-re cooled chipset 270x10 @ 2700Mhz, 1.4+104.8 cpu voltages 245.5fsb @ 3-4-8-3 @ 2.66v vdimm Share this post Link to post Share on other sites More sharing options...
Thraxz Posted September 23, 2006 Posted September 23, 2006 DFI LANPARTY nF4 SLI-DR NF4 SLI-DR - (7-20 BIOS)[/color] AMD Opteron 165 - CCBBE 0610 stepping 2x512MB Centon PC4000 BH-5 ATi Radeon X1900XTX 650/1550 2x 300GB Seagate Perpendicular HDDs - 3.0Gb/s SATA in RAID-0 Plextor 740-A DVD-RW OCZ GXE 700w PSU TDX/MAZE4 CPU/GPU waterblocks ========== Genie BIOS Settings: FSB Bus Frequency - 320 LDT/FSB Frequency Ration - 3x CPU/FSB Frequency Ratio - Auto PCI eXpress Frequency - 105Mhz CPU VID StartUp Value - 1.400v CPU VID Control - 1.475v CPU VID Special Control - Auto LDT Voltage Control - 1.30v Chip Set Voltage Control - 1.60v DRAM Voltage Control - 3.40v DRAM Configuration Settings: DRAM Frequency Set - 150 (DRAM/FSB:3/04) Command Per Clock (CPC) - Enable CAS Latency Control (Tcl) - 1.5 RAS# to CAS# delay (Trcd) - 02 Bus Clocks Min RAS# active time (Tras) - 00 Bus Clocks Row precharge time (Trp) - 02 Bus Clocks Row Cycle time (Trc) - 07 Bus Clocks Row refresh cyc time (Trfc) - 12 Bus Clocks Row to Row delay (Trrd) - 02 Bus Clocks Write recovery time (Twr) - 02 Bus Clocks Write to Read delay (Twtr) - 01 Bus Clocks Read to Write delay (Trwt) - 01 Bus Clocks Refresh Period (Tref) - 3120 Cycles Write CAS Latency (Twcl) - 1 CLK DRAM Bank Interleave - Enabled DQS Skew Control - Faster 192 DQS Skew Value - 0 DRAM Drive Strength - Level 8 DRAM Data Drive Strength - Level 3 Max Async Latency - Auto Read Preamble Time - Auto IdleCycle Limit - 16 Cycles Dynamic Counter - Disable R/W Queue Bypass - 16 x Bypass Max - 07 x 32 Byte Granularity - Disable ========== Prime95 + 3dMark2001SE + CPU-Z 1.28+ Everest: 3dMark2003: 3dMark2005: 3dMark2006: ========== short description: 320x9 @ 2880Mhz, 1.475vcore + 0% 1.5-2-2-0-1T @ 3.4v vdimm Share this post Link to post Share on other sites More sharing options...
cler1c Posted September 23, 2006 Posted September 23, 2006 DFI LANPARTY nF4 SLI-DR Expert - 04/06/2006 BIOS AMD Athlon64 3200+ Venice 512k L2 2x1024MB Mushkin (991483) orange slots[/size] 2x Nvidia 7900GS, 91.47 driver 2x160GB WD Raptor Raid 0 2x160GB Hitachi Sata II Raid 0 OCZ GameXStream 700W PSU Swiftech Storm Rev. 2, 2 x DD Maze4, Thermochill PA 120.3, Laing D5 * * ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency - 260 LDT/FSB Frequency Ratio - AUTO CPU/FSB Frequency Ratio - x10 PCI eXpress Frequency - 100Mhz CPU VID StartUp Value - AUTO CPU VID Control - 1.4v CPU VID Special Control - Above VID * 112% LDT Voltage Control - 1.20v Chip Set Voltage Control - 1.65v DRAM Voltage Control - 2.55v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set - 200=RAM/FSB:1/01 Command Per Clock (CPC) - Enable CAS Latency Control (Tcl) - 3 RAS# to CAS# delay (Trcd) - 04 Bus Clocks Min RAS# active time (Tras) - 08 Bus Clocks Row precharge time (Trp) - 03 Bus Clocks Row Cycle time (Trc) - 07 Bus Clocks Row refresh cyc time (Trfc) - 14 Bus Clocks Row to Row delay (Trrd) - 02 Bus Clocks Write recovery time (Twr) - 02 Bus Clocks Write to Read delay (Twtr) - 02 Bus Clocks Read to Write delay (Trwt) - 03 Bus Clocks Refresh Period (Tref) - 3120 Cycles Write CAS Latency (Twcl) - 01 Bus Clock DRAM Bank Interleave - Enabled DQS Skew Control - Auto DQS Skew Value - 0 DRAM Drive Strength - Level 8 DRAM Data Drive Strength - Level 3 (Reduce 15%) Max Async Latency - 8.0 Nano Seconds DRAM Response Time - Fastest Read Preamble Time - 5.0 Nano Seconds IdleCycle Limit - 16 Cycles Dynamic Counter - Disable R/W Queue Bypass - 16 x Bypass Max - 07 x 32 Byte Granularity - Disable(4 Bursts) [/color] ========== Prime95 + 3dMark2001SE + CPU-Z 1.29: 3dMark2003: 3dMark2005 + Everest: 3dMark2006 ========== short description: 260x10 @ 2600Mhz, 1.4v + 112% 3-4-8-3 @ 2.55v vdimm Share this post Link to post Share on other sites More sharing options...
dave24 Posted September 24, 2006 Posted September 24, 2006 DFI LANPARTY UT nF4 SLI-DR Expert(0406BTA BIOS) AMD Athlon 64FX-55 2x1024MB EL DDR PC-3200 Gold GX XTC (OCZ4002048ELGEGXT-K) XFX GeForce 7600GT XXX Edition, 590/800 91.36 drivers 2X 200GB MAXTOR SATA hdd RAID 0 2X 160GB SEAGATE SATA hdd RAID 0 PLEXTOR PX-755A SATA DVDRW PIONEER DVR-109 DVDRW TAGAN 480W Power Supply *[ATTACH]5193[/ATTACH] [ATTACH]5194[/ATTACH] [ATTACH]5195[/ATTACH] [ATTACH]5196[/ATTACH] [ATTACH]5197[/ATTACH] * * * ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 232 LDT/FSB Frequency Ratio....................... - 4 CPU/FSB Frequency Ratio....................... - 13X PCI eXpress Frequency......................... - 101Mhz CPU VID StartUp Value......................... - 1.500v CPU VID Control............................... - Auto CPU VID Special Control....................... - Auto LDT Voltage Control........................... - 1.30v Chip Set Voltage Control...................... - 1.52v DRAM Voltage Control.......................... - 2.80v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 200=RAM/FSB:01/01 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 2.5 RAS# to CAS# delay (Trcd)..................... - 3 Min RAS# active time (Tras)................... - 6 Row precharge time (Trp)...................... - 3 Row Cycle time (Trc).......................... - 13 Bus Clocks Row refresh cyc time (Trfc)................... - 16 Bus Clocks Row to Row delay (Trrd)....................... - 03 Bus Clocks Write recovery time (Twr)..................... - 03 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 3120 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Disabled DQS Skew Value................................ - 0 DRAM Drive Strength........................... - Normal DRAM Data Drive Strength...................... - 4 (No Reduction) Max Async Latency............................. - 7 ns DRAM Response Time............................ - Normal Read Preamble Time............................ - 5.5 ns IdleCycle Limit............................... - 256 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 04 x 32 Byte Granularity........................... - Disable(4 Bursts) [/color] ========== ========== short description: 232x13 @ 3.02 Ghz, Auto cpu voltages 2.5-3-3-6 @ 2.80v vdimm Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now