Jump to content
Sign in to follow this  
Angry_Games

Socket 939 Overclocking Database

Recommended Posts

DFI LANPARTY nF4 SLI-DR (7/04-2BTA BIOS)

 

AMD Opteron 165 CCBBE 0617FPMW

 

2x1024MB Munskin Redline XP4000 (991493)

 

EVGA GeForce 7900GTX, 650/1600 83.21 drivers

 

150GB Western Digital Raptor X WD1500AHFD

 

2x 400GB Seagate Barracuda 7200.9 ST3400633AS

 

Khypermedia DVD+RW 8x4x12

 

OCZ PowerStream 520W Power Supply

 

Swiftech H20-220 APEX ULTRA & MCW60 VGA Block

 

==========

 

[b]Genie BIOS Settings:[/b]
[color=red]
FSB Bus Frequency.............................  -  336
LDT/FSB Frequency Ratio.......................  -  x 3.0
CPU/FSB Frequency Ratio.......................  -  x 9.0
PCI eXpress Frequency.........................  -  100Mhz

CPU VID StartUp Value.........................  -  Startup

CPU VID Control...............................  -  1.425v
CPU VID Special Control.......................  -  110%
LDT Voltage Control...........................  -  1.20v 
Chip Set Voltage Control......................  -  1.50v
DRAM Voltage Control..........................  -  2.80v[/color]

[b]DRAM Configuration Settings:[/b]
[color=red]
DRAM Frequency Set............................  -  166=RAM/FSB:05/06
Command Per Clock (CPC).......................  -  Enable 
CAS Latency Control (Tcl).....................  -  03
RAS# to CAS# delay (Trcd).....................  -  03
Min RAS# active time (Tras)...................  -  01
Row precharge time (Trp)......................  -  02
Row Cycle time (Trc)..........................  -  07 Bus Clocks
Row refresh cyc time (Trfc)...................  -  13 Bus Clocks
Row to Row delay (Trrd).......................  -  00 Bus Clocks
Write recovery time (Twr).....................  -  03 Bus Clocks
Write to Read delay (Twtr)....................  -  01 Bus Clocks
Read to Write delay (Trwt)....................  -  03 Bus Clocks
Refresh Period (Tref).........................  -  3120 Cycles
DRAM Bank Interleave..........................  -  Enabled

DQS Skew Control..............................  -  Increase Skew
DQS Skew Value................................  -  221 
DRAM Drive Strength...........................  -  normal4
DRAM Data Drive Strength......................  -  Level 2
Max Async Latency.............................  -  Auto
DRAM Response Time............................  -  Fast
Read Preamble Time............................  -  Auto
IdleCycle Limit...............................  -  32 Cycles
Dynamic Counter...............................  -  Disable
R/W Queue Bypass..............................  -  16 x
Bypass Max....................................  -  05 x
32 Byte Granularity...........................  -  Disable(4 Bursts)
[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z:

 

normal_336x9-1_475+110per-166ram.png

 

 

3dMark2003:

 

normal_Everest-MemRead-3dMark03-default.png

 

 

3dMark2005:

 

normal_Everest-MemWrite-3dMark05-default.png

 

 

3dMark 2006:

 

normal_Everest-MemLatency-3dMark06-default.png

 

 

==========

 

 

short description:

336x9 @ 3022Mhz, 1.425v +110%

3-3-2-1 @ 2.80v vdimm

Share this post


Link to post
Share on other sites
Guest Ryn

DFI LANPARTY nF4 SLI-DR Expert - 04/06/06 Official Bios

 

AMD Athlon64 X2 3800+ Toledo

 

2x1GB OCZ EL DDR PC-4000 Gold GX XTC

 

eVGA 7800GT, 480/1130 91.31 drivers

 

Creative X-Fi Xtreme Music

 

1x Seagate 160GB 7200.9 SATAII w/NCQ / 1x200GB Seagate SATA I & 2x320GB Western Digital 16MB Cache SATAII

 

ASUS DVD-ROM

 

Pioneer A09XLA DVD/RW

 

OCZ PowerStream 520W SLI

 

 

 

 

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 240

LDT/FSB Frequency Ratio - 4

CPU/FSB Frequency Ratio - 10

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - startup

 

CPU VID Control - 1.425v

CPU VID Special Control - Auto

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.59v

DRAM Voltage Control - 2.77v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200=RAM/FSB:01/1

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 3.0

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 03 Bus Clocks

Row Cycle time (Trc) - 11 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 03 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 3120 Cycles

Odd Divisor Correct - Disable

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 07

DRAM Data Drive Strength - Level 02 (Reduce 30%)

Max Async Latency - Auto

DRAM Response Time - Fast

Read Preamble Time - Auto

IdleCycle Limit - 128 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.32:

 

prime3dmark01cpuzpk7.th.jpg

 

 

3dMark2003:

 

3dmark03ap2.th.jpg

 

 

3dMark2005:

 

3dmark05cc1.th.jpg

 

 

3dMark2006:

 

3dmark06mx0.th.jpg

 

 

Everest Read:

 

everestreadtp2.th.jpg

 

 

Everest Write:

 

everestwriteii1.th.jpg

 

 

 

short description:

240x10 @ 2400Mhz, 1.425v

3-4-8-3 @ 2.77v vdimm 240MHz (1:1 ratio)

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 SLI-DR Expert (7/04-2BTA BIOS)

 

AMD Opteron 170 CCB1E 0550VPMW Naked

 

2x512MB Twinmos (Powerchip 1.1)

 

XFX GeForce 7900GT Extreme Edition, 710/920 @ 1.55vCore 91.31 drivers

 

Seagate 160Gb SATA II hdd

 

Acer Generic DVD R/RW

 

Enermax Liberty 500w

 

DangerDen TDX/Maze 4/D5 Pump/BI GTS360/1/2" Tygon

 

 

 

*

*

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  300

LDT/FSB Frequency Ratio.......................  -  x3

CPU/FSB Frequency Ratio.......................  -  x10

PCI eXpress Frequency.........................  -  120Mhz



CPU VID StartUp Value.........................  -  1.400v



CPU VID Control...............................  -  1.450

CPU VID Special Control.......................  -  + 112.0%

LDT Voltage Control...........................  -  1.30v 

Chip Set Voltage Control......................  -  1.65v

DRAM Voltage Control..........................  -  2.71v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  140=RAM/FSB:07/10

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  2.5

RAS# to CAS# delay (Trcd).....................  -  3

Min RAS# active time (Tras)...................  -  7

Row precharge time (Trp)......................  -  3

Row Cycle time (Trc)..........................  -  7 Bus Clocks

Row refresh cyc time (Trfc)...................  -  12 Bus Clocks

Row to Row delay (Trrd).......................  -  02 Bus Clocks

Write recovery time (Twr).....................  -  02 Bus Clocks

Write to Read delay (Twtr)....................  -  01 Bus Clocks

Read to Write delay (Trwt)....................  -  02 Bus Clocks

Refresh Period (Tref).........................  -  2064 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Leval 7

DRAM Data Drive Strength......................  -  Leval 4

Max Async Latency.............................  -  8.0

DRAM Response Time............................  -  Fastest

Read Preamble Time............................  -  0.6

IdleCycle Limit...............................  -  016 Cycles

Dynamic Counter...............................  -  Enable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  04 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z:

 

primexb2.th.jpg

 

3dMark2003:

 

3d03qh7.th.jpg

 

3dMark2005:

 

3d05hp1.th.jpg

 

3dMark 2006:

 

3d06xo3.th.jpg

 

Everets Benchmarks:

 

everestim4.th.jpg

 

==========

 

 

 

short description:

300x10 @ 3000Mhz, 1.45 x 112.0%

2.5-3-7-3 @ 2.71v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 ULTRA-D (6-23-3 bios)

 

AMD Opteron 165 CCBBE 0610 DPMW

 

2x1024MB G.SkiLL HZ SERIES

 

EVGA GeForce 7900GT, 650/900 84.21 drivers

 

300GB Samsung SATAII hdd

 

Generic 4x DVD-RW

 

Seasonic S12 600w Power Supply

 

 

 

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  340

LDT/FSB Frequency Ratio.......................  -  3x

CPU/FSB Frequency Ratio.......................  -  9x

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  1.500v



CPU VID Control...............................  -  1.425v

CPU VID Special Control.......................  -  110%

LDT Voltage Control...........................  -  1.40v 

Chip Set Voltage Control......................  -  1.60v

DRAM Voltage Control..........................  -  2.60v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  150 (DRAM/FSB:3/04)

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  3

RAS# to CAS# delay (Trcd).....................  -  4

Min RAS# active time (Tras)...................  -  8

Row precharge time (Trp)......................  -  4

Row Cycle time (Trc)..........................  -  12 Bus Clocks

Row refresh cyc time (Trfc)...................  -  Auto

Row to Row delay (Trrd).......................  -  02 Bus Clocks

Write recovery time (Twr).....................  -  02 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  LEVEL 8

DRAM Data Drive Strength......................  -  LEVEL 1

Max Async Latency.............................  -  Auto

DRAM Response Time............................  -  Normal

Read Preamble Time............................  -  5.5 NS

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z + Everest 3.01:

 

 

updatenh6.th.jpg

 

3dMark2003:

 

3dmark03cx6.th.jpg

 

3dMark2005:

 

3dmark05ex9.th.jpg

 

 

3dMark 2006:

 

3dmark06tt0.th.jpg

 

 

==========

 

 

 

short description:

340X9 @ 3060Mhz, 1.56v

3-4-4-8 2.6v vdimm

Share this post


Link to post
Share on other sites

LANPARTY UT NF4 SLI-DR Venus - 03/07/06 BIOS

 

AMD Opteron 165 CCBBE0610DPMW

 

Mushkin eXtreme Performance 2GB (2 x 1GB) Redline

 

HIS Radeon X1900 XT IceQ3, 683/824, 6.7 Drivers

 

Hitachi Deskstar T7K250 160GB Serial ATA II 7200RPM Hard Drive w/8MB Buffer x 2 RAID 0

 

Maxtor Maxline III 7L300S0 300GB Serial ATA 1.5Gb 7200RPM Hard Drive w/16MB Buffer

 

Liteon SOHW-1693S 16X Dual Layer DVD±RW Drive (Black)

 

OCZ GameXStream OCZ700GXSSLI ATX12V 700W Power Supply

 

Swiftech STORM Extreme Performance Universal Water-block - Rev 2

 

Swiftech MCP655 Pump

 

Black Ice Pro III Triple 120mm Radiator With D12SL-12 YATE LOON 120mm Case Fans

 

Chipset Cooled By Evercool VC-RE VGACooler

 

Zalman VF700-CU VGA Cooler

 

 

 

 

 

[b]Genie BIOS Settings:[/b]

[color=navy]

FSB Bus Frequency..................... 342

LDT/FSB Frequency Ratio............... Auto

CPU/FSB Frequency Ratio............... 9x

PCI Express Frequency................. 100





CPU VID Startup Value................. 1.350

CPU VID Control....................... 1.500

VID Special Control................... 107.2%

LDT Voltage Control................... 1.20V

Chip Set Voltage Control.............. 1.52v

Dram Voltage Control.................. 2.63v[/color]







[b]DRAM Configuration Settings:[/b]

[color=darkgreen]

Dram Frequency Set (Mhz).............. 150=RAM/FSB:03/04

Command Per Clock (CPC)............... Enable

CAS# latency (Tcl).................... 3.0

RAS# to CAS# delay (Trcd)............. 03

Min RAS# active time (Tras)......... . 00

Row Precharge Time (Trp).............. 02

Row Cycle Time (Trc).................. 07

Row refresh timg (Trfc)............... 14

RAS# to RAS# delay (Trrd)............. 02

Write Recovery Time (Twr)............. 02

Wite-to-Read Delay (Twtr)............. 01

Read-to-Write Delay (Trwt)............ 03

Refresh Rate (Tref)................... 3120 Cycles

Write CAS Latency (Twcl)...............01

DRAM Bank Interleaving................ Enabled





DQS Skew Control...................... Auto

DQS Skew Value........................ 0

DRAM Drive Strength................... Level 06

DRAM Data Drive Strength.............. Level 1

Max Asynchronous Latency.............. 09.0

DRAM Response Time.....................Normal

Read Preamble Time.................... 05.0

IdleCycle Limit........................16

Dynamic Counter....................... Disable

R/W Queue Bypass.......................16X

Bypass Max.............................07X

32-Byte Granularity................... Disable (4 bursts)

[/color]

 

 

 

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.36 + Everest 3.00.630:

 

3d01trt5.th.png

 

 

3dMark2003:

 

3d03th8.th.png

 

 

3dMark2005:

 

3d05qy9.th.png

 

 

3dMark2006:

 

3d06bg9.th.png

 

 

short description:

[email protected] 3078Mhz, 1.500v + 107.2%

3-3-2-0 @ 2.63v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 SLI-DR Expert (406 BIOS)

 

AMD X2 4400+ Dual Core CBBIE 0610 DPMW (89W)

 

2x1024MB Corsair XMS PC3200 (LEDs)

 

EVGA 7900GTs (SLI) , 660 / 810 91.33 Drivers

 

74GB Western Digital Raptor 10,000RPM SATA hdd's in RAID0 - Windows XP Pro

 

OCZ GamerXtreme 700W

 

DangerDen TDX, Koosah SLI waterblocks, Black Ice Stealth GTS 240, Laing D5, 1/2" Tubing, Fluid XP

 

 

 

 

*

*

*

*

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  260

LDT/FSB Frequency Ratio.......................  -   Auto

CPU/FSB Frequency Ratio.......................  -  11

PCI eXpress Frequency.........................  -  105Mhz



CPU VID StartUp Value.........................  -  1.400



CPU VID Control...............................  -  Auto

CPU VID Special Control.......................  -  Above VID * 104.8%

LDT Voltage Control...........................  -  1.30v 

Chip Set Voltage Control......................  -  1.56v

DRAM Voltage Control..........................  -  2.84[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  200=RAM/FSB:01/01

Command Per Clock (CPC).......................  -  Auto

CAS Latency Control (Tcl).....................  -  3

RAS# to CAS# delay (Trcd).....................  -  3

Min RAS# active time (Tras)...................  -  8

Row precharge time (Trp)......................  -  2

Row Cycle time (Trc)..........................  -  Auto

Row refresh cyc time (Trfc)...................  - Auto

Row to Row delay (Trrd).......................  -  02 Bus Clocks

Write recovery time (Twr).....................  -  02 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

Odd Divisor Correct.........................	- Disable

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Auto

DRAM Data Drive Strength......................  -  Auto

Max Async Latency.............................  -  Auto

DRAM Response Time............................  -  Fastest

Read Preamble Time............................  -  Auto

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  04 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z :

 

http://i58.photobucket.com/albums/g253/wat...e/OCDBEntry.jpg

 

 

3dMark2003 + CPU-Z + Everest Read :

 

http://i58.photobucket.com/albums/g253/wat...OCDBEntry-2.jpg

 

 

3dMark2005 + CPU-Z + Everest Write :

 

http://i58.photobucket.com/albums/g253/wat...OCDBEntry-3.jpg

 

 

 

3dMark 2006 + CPU-Z + Everest Latency :

 

http://i58.photobucket.com/albums/g253/wat...OCDBEntry-4.jpg

 

 

 

==========

 

 

 

short description:

260x11 @ 2866Mhz

3-3-8-2-1T @ 2.84 vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 ultra-d modded to sli-d (4/06BTA BIOS)

 

AMD opteron 146 (cab1e 0614epaw)xp-90 air cooled

 

2x1024MB OCZ PC4000GOLDXTC(OCZ5002048ELGEGXT-K)

 

EVGA GeForce 6800GS, 500/1200 81.98 drivers

 

320GB Western Digital 7200RPM SATA hdd

 

250GB Western Digital 7200RPM SATA hdd

 

Lite-on 16xDVD Burner

 

Ocz Modstream 520w Power Supply

 

 

*

*

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  317

LDT/FSB Frequency Ratio.......................  -  3

CPU/FSB Frequency Ratio.......................  -  10

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  auto



CPU VID Control...............................  -  1.425

CPU VID Special Control.......................  -  110%

LDT Voltage Control...........................  -  1.20v 

Chip Set Voltage Control......................  -  1.50v

DRAM Voltage Control..........................  -  2.60v+enable[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  166=RAM/FSB:05/06

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  3

RAS# to CAS# delay (Trcd).....................  -  4

Min RAS# active time (Tras)...................  -  8

Row precharge time (Trp)......................  -  4

Row Cycle time (Trc)..........................  -  11 Bus Clocks

Row refresh cyc time (Trfc)...................  -  16 Bus Clocks

Row to Row delay (Trrd).......................  -  03 Bus Clocks

Write recovery time (Twr).....................  -  03 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  normal level 4

DRAM Data Drive Strength......................  -  level 2

Max Async Latency.............................  -  11ns

DRAM Response Time............................  -  Normal

Read Preamble Time............................  -  9ns

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z:

 

primeig2.th.jpg

 

 

3dMark2003 + Everest:

 

3d033170eh6.th.jpg

 

 

3dMark2005:

 

3d053170wa9.th.jpg

 

 

 

3dMark 2006:

 

3d063170tk1.th.png

 

 

 

==========

 

 

 

short description:

air cooled with xp-90/vc-re cooled chipset

317x10 @ 3170Mhz, 1.425+110% = 1.57v cpu voltages

264fsb @ 3-4-8-4 @ 2.60v+enable vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 SLI-D (Official 06/03/2005)

 

AMD X2 4200+ Manchester Dual Core

 

2x1024MB Corsair XMS (TWINX2048-3200C2)

 

eVGA 7800GT, 490/1200 81.98 drivers

 

36 GB Western Digital Raptor 10,000RPM SATA HDD

 

250 GB Western Digital RE16 SATAII HDD

 

LG DVD-RW 16x16x8

 

Antec 550W PSU

 

Custom Watercooling w/ standalone 350W PSU

 

*

*

*

*

*

 

==========

 

[b]Genie BIOS Settings:[/b]
[color=red]
FSB Bus Frequency.............................  -  260
LDT/FSB Frequency Ratio.......................  -  x4
CPU/FSB Frequency Ratio.......................  -  x10.0
PCI eXpress Frequency.........................  -  100Mhz

CPU VID StartUp Value.........................  -  Startup

CPU VID Control...............................  -  1.425V
CPU VID Special Control.......................  -  Auto
LDT Voltage Control...........................  -  1.20v 
Chip Set Voltage Control......................  -  1.50v
DRAM Voltage Control..........................  -  2.80v[/color]

[b]DRAM Configuration Settings:[/b]
[color=red]
DRAM Frequency Set............................  -  180=RAM/FSB:09/10
Command Per Clock (CPC).......................  -  Enable 
CAS Latency Control (Tcl).....................  -  3
RAS# to CAS# delay (Trcd).....................  -  03 Bus Clocks
Min RAS# active time (Tras)...................  -  03 Bus Clocks
Row precharge time (Trp)......................  -  07 Bus Clocks
Row Cycle time (Trc)..........................  -  14 Bus Clocks
Row refresh cyc time (Trfc)...................  -  03 Bus Clocks
Row to Row delay (Trrd).......................  -  03 Bus Clocks
Write recovery time (Twr).....................  -  03 Bus Clocks
Write to Read delay (Twtr)....................  -  02 Bus Clocks
Read to Write delay (Trwt)....................  -  03 Bus Clocks
Refresh Period (Tref).........................  -  3120 Cycles
DRAM Bank Interleave..........................  -  Enabled

DQS Skew Control..............................  -  Auto
DQS Skew Value................................  -  0
DRAM Drive Strength...........................  -  Level 6
DRAM Data Drive Strength......................  -  Level 3
Max Async Latency.............................  -  7.0 Nano Seconds
DRAM Response Time............................  -  Fast
Read Preamble Time............................  -  5.0 Nano Seconds
IdleCycle Limit...............................  -  256 Cycles
Dynamic Counter...............................  -  Disable
R/W Queue Bypass..............................  -  16 x
Bypass Max....................................  -  07 x
32 Byte Granularity...........................  -  Disable(4 Bursts)
[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z + Everest 2.20:

 

LINK

 

 

3dMark2003:

 

LINK

 

 

3dMark2005:

 

 

LINK

 

 

3dMark 2006:

 

LINK

 

 

 

==========

 

 

 

short description:

260x10 @ 2600Mhz ~ 1.425V

3-3-6-3 @ 2.80v vdimm

Share this post


Link to post
Share on other sites

DFI LanPartyUT nF4 SLI-DR Expert(7/04-2BTA BIOS)

 

AMD Opteron 165 Toledo CCBBE 0617FPMW 336*9=3024MHz @ 1.4*116.8%=1.635v

 

2x1024MB G.Skill PC4000 (F1-4000USU2-2GBHZ)

 

XFX GeForce 7900GTX, 650/1600 91.31 Forceware

 

2x36GB Western Digital Raptor 10,000RPM SATA

 

320GB Maxtor DiamondMax10

 

HP DVD Writer 740b

 

OCZ GameXstream 700W

 

 

*

*

*

*

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  336

LDT/FSB Frequency Ratio.......................  -  3x

CPU/FSB Frequency Ratio.......................  -  9x

PCI eXpress Frequency.........................  -  101Mhz



CPU VID StartUp Value.........................  -  1.500v



CPU VID Control...............................  -  1.400v

CPU VID Special Control.......................  -  116.8%

LDT Voltage Control...........................  -  1.20v 

Chip Set Voltage Control......................  -  1.52v

DRAM Voltage Control..........................  -  2.68v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  150=RAM/FSB:01/01

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  3

RAS# to CAS# delay (Trcd).....................  -  4

Min RAS# active time (Tras)...................  -  8

Row precharge time (Trp)......................  -  4

Row Cycle time (Trc)..........................  -  13 Bus Clocks

Row refresh cyc time (Trfc)...................  -  16 Bus Clocks

Row to Row delay (Trrd).......................  -  03 Bus Clocks

Write recovery time (Twr).....................  -  03 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Increase Skew

DQS Skew Value................................  -  221

DRAM Drive Strength...........................  -  Level 8

DRAM Data Drive Strength......................  -  Auto

Max Async Latency.............................  -  8.0ns

DRAM Response Time............................  -  Normal

Read Preamble Time............................  -  5.5ns

IdleCycle Limit...............................  -  128 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z:

 

prime2001seut3.th.jpg

 

 

3dMark2003 + Everest 2.20 Home:

 

3dmark03si9.th.jpg

 

 

3dMark2005 + CPU-Z:

 

3dmark05kx1.th.jpg

 

 

3dMark 2006 + CPU-Z:

 

3dmark06to5.th.jpg

 

==========

 

 

short description:

336x9 @ 3024Mhz, 1.4*116.8%=1.635v

3-4-8-4-1T @ 2.68v vdimm

Share this post


Link to post
Share on other sites

DFI LANParty NF4 SLI-DR Expert

 

AMD Athlon64 X2 4400+

 

2x1024 OCZ EB (OCZ5002048EBPE-K)

 

2x eVGA 6600GT

 

2x Hitachi T7K250 160GB 3.0GB/s(Raid Striping)

 

Hiper Type-R 580w

 

 

 

*

*

 

 

*

*

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]



FSB Bus Frequency.............................  -  264

LDT/FSB Frequency Ratio.......................  -  auto

CPU/FSB Frequency Ratio.......................  -  x 11

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  auto



CPU VID Control...............................  -  1.400v

CPU VID Special Control.......................  -  Above VID * 104.8

LDT Voltage Control...........................  -  1.20v 

Chip Set Voltage Control......................  -  1.52v

DRAM Voltage Control..........................  -  2.68v

[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]



DRAM Frequency Set............................  -  180=RAM/FSB:09/10

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  03

RAS# to CAS# delay (Trcd).....................  -  03 Bus Clocks

Min RAS# active time (Tras)...................  -  08 Bus Clocks

Row precharge time (Trp)......................  -  02 Bus Clocks

Row Cycle time (Trc)..........................  -  08 Bus Clocks

Row refresh cyc time (Trfc)...................  -  16 Bus Clocks

Row to Row delay (Trrd).......................  -  03 Bus Clocks

Write recovery time (Twr).....................  -  03 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  level 08

DRAM Data Drive Strength......................  -  level 2(reduce 30%)

Max Async Latency.............................  -  8ns

DRAM Response Time............................  -  Fast

Read Preamble Time............................  -  6ns

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  04 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z

 

http://img.photobucket.com/albums/v335/Gem...in/ba95b770.jpg

 

 

3dMark2003:

 

OCZEBb.jpg

 

 

3dMark2005:

 

OCZEBc.jpg

 

 

3dMark2006 + Everest read:

 

OCZEBd.jpg

 

 

 

 

 

==========

 

 

 

short description:

264x11 @ 2904 Mhz. , 1.400v + 104.8%

3-3-2-8 @ 2.68v vdimm

Share this post


Link to post
Share on other sites

DFI Ultra-D @ 2851MHz - 2G GSkill Hz, XP x64 Edition

 

DFI LANPARTY nF4 Ultra-D Rev. AE1 Bios 704-2bta

 

AMD Opteron 170 CCB1E 0550VPMW Dual Core (nekid)

 

Arctic Cooling Freezer 64 Pro

 

2x1024MB GSkill Extreme Series DDR500 F1-40000USU2-2GBHZ

 

PowerColor X800GTO, 398/986 Cat 6.7 drivers

 

200GB Seagate 7200.7 8M 7200RPM IDE HDD

 

NEC ND-3550A (Liggy's 1Y6 Firmware) DVD+/-R/RW

 

Skyhawk 620w Power Supply

 

 

==========

 

[b]Genie BIOS Settings:[/b]
[color=red]
FSB Bus Frequency.............................  -  285
LDT/FSB Frequency Ratio.......................  -  3
CPU/FSB Frequency Ratio.......................  -  10x
PCI eXpress Frequency.........................  -  100Mhz

CPU VID StartUp Value.........................  -  Auto

CPU VID Control...............................  -  1.40v
CPU VID Special Control.......................  -  113%
LDT Voltage Control...........................  -  1.20v 
Chip Set Voltage Control......................  -  1.50v
DRAM Voltage Control..........................  -  2.60v[/color]

[b]DRAM Configuration Settings:[/b]
[color=red]
DRAM Frequency Set............................  -  166=RAM/FSB:5/6
Command Per Clock (CPC).......................  -  Enable 
CAS Latency Control (Tcl).....................  -  3
RAS# to CAS# delay (Trcd).....................  -  4
Min RAS# active time (Tras)...................  -  8
Row precharge time (Trp)......................  -  4
Row Cycle time (Trc)..........................  -  07 Bus Clocks
Row refresh cyc time (Trfc)...................  -  14 Bus Clocks
Row to Row delay (Trrd).......................  -  02 Bus Clocks
Write recovery time (Twr).....................  -  02 Bus Clocks
Write to Read delay (Twtr)....................  -  02 Bus Clocks
Read to Write delay (Trwt)....................  -  03 Bus Clocks
Refresh Period (Tref).........................  -  3684 Cycles
DRAM Bank Interleave..........................  -  Enabled

DQS Skew Control..............................  -  Auto
DQS Skew Value................................  -  0
DRAM Drive Strength...........................  -  7
DRAM Data Drive Strength......................  -  3
Max Async Latency.............................  -  8.0
DRAM Response Time............................  -  Normal
Read Preamble Time............................  -  7.0
IdleCycle Limit...............................  -  256 Cycles
Dynamic Counter...............................  -  Disable
R/W Queue Bypass..............................  -  16 x
Bypass Max....................................  -  07 x
32 Byte Granularity...........................  -  Disable(4 Bursts)
[/color]

 

 

==========

 

 

Dual Prime95 + 3dMark2001SE + CPU-Z + Everest Ultimate 3.01:

 

prime28513d2001cpuzx2ai4.th.jpg

 

 

3dMark2003:

 

3d2003at2851dg3.th.jpg

 

 

3dMark2005:

 

3d2005at2851tx0.jpg

 

 

3dMark 2006:

 

3d2006at2851nv2.jpg

 

 

==========

 

 

 

short description:

285x10 @ 2800Mhz, 1.57v CPU

3-4-8-4 @ 2.60v vdimm

Share this post


Link to post
Share on other sites
Guest MadDias

DFI LANPARTY RDX200 CF-DR (12/23/05 BIOS)

 

AMD Opteron 165 CCB1E 0605 XPMW

 

2x 1024 MB G.SKILL F1-4000BIU2-2GBHV PC4000

 

Connect3D X1800XT 256mb, 735/1692 CAT6.8 (oc´ed with AtiTool)

 

2x MAXTOR 120GB S-ATA (RAID0)

 

Pioneer DVD-RW DVR-110D

 

ENERMAX Noisetaker 600W

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  312

HT PLL High Speed.............................  -  Enabled

LDT/FSB Frequency Ratio.......................  -  3x

CPU/FSB Frequency Ratio.......................  -  9x



CPU VID StartUp Value.........................  -  1.35V



NB-SB Port Configuration......................  -  Enhanced



CPU VID Control...............................  -  1.350V

CPU VID Special Control.......................  -  107,2%

DRAM Voltage Control..........................  -  2.65v

SB PCIE Voltage...............................  -  1.8v

NB Analog Voltage.............................  -  1.2v

LDT Bus Voltage...............................  -  1.3v 

NB Core Voltage...............................  -  1.2v

[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  166=RAM/FSB:05/06

Command Per Clock (CPC).......................  -  Enable

CAS Latency Control (Tcl).....................  -  3.0 Bus Clocks

RAS# to CAS# delay (Trcd).....................  -  03 Bus Clocks

Min RAS# active time (Tras)...................  -  08 Bus Clocks

Row precharge time (Trp)......................  -  02 Bus Clocks

Row Cycle time (Trc)..........................  -  07 Bus Clocks

Row refresh cyc time (Trfc)...................  -  13 Bus Clocks

Row to Row delay (Trrd).......................  -  03 Bus Clocks

Write recovery time (Twr).....................  -  03 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Level 8

DRAM Data Drive Strength......................  -  Level 1 (Reduce50%)

Max Async Latency.............................  -  8.0 ns

Read Preamble Time............................  -  5.5 ns

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Enabled

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  7 x

32 Byte Granularity...........................  -  Disable (8 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.35 + EverestUltimateEdition2006 (Memory read):

 

ocdbprime95everestif2.th.jpg

 

 

3dMark2003 :

 

ocdb3dmark03wx9.th.jpg

 

 

3dMark2005 + EverestUltimateEdition2006 (Memory write) + ATITool :

 

ocdb3dmark05everestag1.th.jpg

 

 

3dMark2006 + EverestUltimateEdition2006 (Memory latency) :

 

ocdb3dmark06everestka0.th.jpg

 

 

 

 

==========

 

 

 

short description:

312x9 @ 2808Mhz, 1.45v

3.0-3-8-2 @ 2.65V vdimm

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...