Jump to content
Sign in to follow this  
Angry_Games

Socket 939 Overclocking Database

Recommended Posts

DFI LANPARTY nF4 ultra-d modded to sli-d (704-2BTA BIOS)

 

AMD opteron 146 (cab1e 0614epaw) xp-90 air cooled

 

2x1024MB OCZ PC4000GOLDXTC(OCZ5002048ELGEGXT-K)

 

EVGA GeForce 6800GS, 500/1200 81.98 drivers

 

320GB Western Digital 7200RPM SATA hdd

 

250GB Western Digital 7200RPM SATA hdd

 

Lite-on 16xDVD Burner

 

Ocz Modstream 520w Power Supply

 

 

*

*

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  315

LDT/FSB Frequency Ratio.......................  -  3

CPU/FSB Frequency Ratio.......................  -  10

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  auto



CPU VID Control...............................  -  1.400

CPU VID Special Control.......................  -  110%

LDT Voltage Control...........................  -  1.20v 

Chip Set Voltage Control......................  -  1.50v

DRAM Voltage Control..........................  -  2.60v+enable[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  166=RAM/FSB:05/06

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  3

RAS# to CAS# delay (Trcd).....................  -  4

Min RAS# active time (Tras)...................  -  8

Row precharge time (Trp)......................  -  4

Row Cycle time (Trc)..........................  -  11 Bus Clocks

Row refresh cyc time (Trfc)...................  -  16 Bus Clocks

Row to Row delay (Trrd).......................  -  03 Bus Clocks

Write recovery time (Twr).....................  -  03 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  normal level 3

DRAM Data Drive Strength......................  -  level 2

Max Async Latency.............................  -  8ns

DRAM Response Time............................  -  Normal

Read Preamble Time............................  -  6ns

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z:

 

prime3150qq7.th.jpg

 

 

3dMark2003 + Everest:

 

3dmark03everestbf3.th.jpg

 

 

3dMark2005:

 

3d05tm4.th.jpg

 

 

 

3dMark 2006:

 

3d06wc4.th.jpg

 

 

 

==========

 

 

 

short description:

air cooled with lapped xp-90/vc-re cooled chipset

315x10 @ 3150Mhz, 1.40+110% = 1.54 cpu voltage

262fsb @ 3-4-8-4 @ 2.60v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 SLI-DR Venus ( 4/6/2006 BIOS)

 

AMD Opteron 165 dual core - CCB1E 0550 VPMW

 

2x1024MB G.SKILL HV4000 (F1-4000BIU2-2GBHV)

 

MSI GeForce 7800GTX, 480/1300 91.31 drivers

 

2x36GB Western Digital Raptor 10,000RPM SATA hdd - RAID 0 & Maxtor Diamondmax 250GB SATA II

 

Pioneer DVR-111DBK

 

Seasonic S-12 500W Power Supply

 

 

==========

 

[b]Genie BIOS Settings:[/b]
[color=red]
FSB Bus Frequency.............................  -  300
LDT/FSB Frequency Ratio.......................  -  x3
CPU/FSB Frequency Ratio.......................  -  x9
PCI eXpress Frequency.........................  -  100Mhz

CPU VID StartUp Value.........................  -  1.350v

CPU VID Control...............................  -  1.500
CPU VID Special Control.......................  -  Auto
LDT Voltage Control...........................  -  1.20v 
Chip Set Voltage Control......................  -  1.50v
DRAM Voltage Control..........................  -  2.70v[/color]

[b]DRAM Configuration Settings:[/b]
[color=red]
DRAM Frequency Set............................  -  166=RAM/FSB:05/06
Command Per Clock (CPC).......................  -  Enable 
CAS Latency Control (Tcl).....................  -  3
RAS# to CAS# delay (Trcd).....................  -  3
Min RAS# active time (Tras)...................  -  6
Row precharge time (Trp)......................  -  2
Row Cycle time (Trc)..........................  -  7 Bus Clocks
Row refresh cyc time (Trfc)...................  -  16 Bus Clocks
Row to Row delay (Trrd).......................  -  02 Bus Clocks
Write recovery time (Twr).....................  -  02 Bus Clocks
Write to Read delay (Twtr)....................  -  02 Bus Clocks
Read to Write delay (Trwt)....................  -  03 Bus Clocks
Refresh Period (Tref).........................  -  3684 Cycles
DRAM Bank Interleave..........................  -  Enabled

DQS Skew Control..............................  -  Off
DQS Skew Value................................  -  0
DRAM Drive Strength...........................  -  7
DRAM Data Drive Strength......................  -  Level 3 (reduce 15%)
Max Async Latency.............................  -  7.0 ns
DRAM Response Time............................  -  Normal
Read Preamble Time............................  -  4.0 ns
IdleCycle Limit...............................  -  256 Cycles
Dynamic Counter...............................  -  Enabled
R/W Queue Bypass..............................  -  16 x
Bypass Max....................................  -  07 x
32 Byte Granularity...........................  -  Disabled(8 Bursts)
[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.35 + Everest Ultimate Edition 2006:

 

prime95zj1.th.jpg

 

 

3dMark2003:

 

3dmark03ip4.th.jpg

 

 

3dMark2005:

 

3dmark05kg9.th.jpg

 

 

3dMark 2006:

 

3dmark06ap9.th.jpg

 

 

 

==========

 

 

 

short description:

300x9 @ 2700Mhz, 1.475V

3-3-2-6 @ 2.70v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D (7/04-2bta BIOS)

 

AMD Opteron 144 CAB1E 0614EPCW

 

2x1GB OCZ PC4000EB (OCZ5001024EBPE-K)

 

BFG 7950GT OC, (stock)

 

320GB Seagate Barracuda 7200.10 ST3320620AS SATA hdd

 

Antec Neo HE 550

 

==========

 

[b]Genie BIOS Settings:[/b]
[color=red]
FSB Bus Frequency.............................  -  334
LDT/FSB Frequency Ratio.......................  -  3
CPU/FSB Frequency Ratio.......................  -  9
PCI eXpress Frequency.........................  -  100Mhz

CPU VID StartUp Value.........................  -  1.5

CPU VID Control...............................  -  1.425
CPU VID Special Control.......................  -  110%
LDT Voltage Control...........................  -  1.30v 
Chip Set Voltage Control......................  -  1.60v
DRAM Voltage Control..........................  -  2.50v[/color]

[b]DRAM Configuration Settings:[/b]
[color=red]
DRAM Frequency Set............................  -  150=RAM/FSB:03/04
Command Per Clock (CPC).......................  -  Enable 
CAS Latency Control (Tcl).....................  -  3
RAS# to CAS# delay (Trcd).....................  -  3
Min RAS# active time (Tras)...................  -  7
Row precharge time (Trp)......................  -  2
Row Cycle time (Trc)..........................  -  9 Bus Clocks
Row refresh cyc time (Trfc)...................  -  12 Bus Clocks
Row to Row delay (Trrd).......................  -  02 Bus Clocks
Write recovery time (Twr).....................  -  02 Bus Clocks
Write to Read delay (Twtr)....................  -  01 Bus Clocks
Read to Write delay (Trwt)....................  -  02 Bus Clocks
Refresh Period (Tref).........................  -  3120 Cycles
DRAM Bank Interleave..........................  -  Enabled

DQS Skew Control..............................  -  Auto
DQS Skew Value................................  -  0
DRAM Drive Strength...........................  -  Normal 4 (Level 8)
DRAM Data Drive Strength......................  -  Level 2
Max Async Latency.............................  -  8 ns
DRAM Response Time............................  -  Normal
Read Preamble Time............................  -  6 ns
IdleCycle Limit...............................  -  128
Dynamic Counter...............................  -  Disable
R/W Queue Bypass..............................  -  16 x
Bypass Max....................................  -  07 x
32 Byte Granularity...........................  -  Disable(4 Bursts)
[/color]

 

 

==========

 

clipboard02ye7.th.jpg

 

am3dr9.th.jpg

 

 

 

 

short description:

334x9 @ 3006Mhz, 1.57v

3-3-7-2 @ 2.50v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY UT nF4 SLI-DR eXpert (Official 04/06/2006)

 

AMD Opteron 165 CCBBE 0610DPMW

 

Thermalright XP-120 w/ Silverstone FM121

 

2x1024MB OCZ PC-4000 Gold XTC (OCZ5002048ELGEGXT-K)

 

Sapphire Radeon X850XT w/ Zalman VF900, 560/1200 Catalyst 6.6 drivers

 

2 x 250GB Western Digital RE SATAII

 

Plextor PX-712A

 

OCZ Gamextream 600

 

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  334

LDT/FSB Frequency Ratio.......................  -  x3

CPU/FSB Frequency Ratio.......................  -  x9

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  1.500v



CPU VID Control...............................  -  1.500v

CPU VID Special Control.......................  -  + 102.4%

LDT Voltage Control...........................  -  1.30v 

Chip Set Voltage Control......................  -  1.58v

DRAM Voltage Control..........................  -  2.71v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  150=RAM/FSB:03/04

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  3

RAS# to CAS# delay (Trcd).....................  -  4

Min RAS# active time (Tras)...................  -  8

Row precharge time (Trp)......................  -  3

Row Cycle time (Trc)..........................  -  11 Bus Clocks

Row refresh cyc time (Trfc)...................  -  16 Bus Clocks

Row to Row delay (Trrd).......................  -  03 Bus Clocks

Write recovery time (Twr).....................  -  03 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  7

DRAM Data Drive Strength......................  -  2

Max Async Latency.............................  -  8.0

DRAM Response Time............................  -  Fast

Read Preamble Time............................  -  6.0

IdleCycle Limit...............................  -  128 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  04 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z:

3dmark01primecpuzatitoolxy9.th.jpg

 

 

3dMark2003:

3dmark0312771dt1.th.jpg

 

 

3dMark2005:

3dmark055794ps2.th.jpg

 

 

3dMark 2006:

3dmark061931vh4.th.jpg

 

 

Everest 2.20.405

everestmemreadwritelatencydv5.th.jpg

 

==========

 

 

 

short description:

334x9 @ 3006Mhz, 1.500v+102.4%=1.536v

3-4-3-8 @ 2.71v vdimm

Share this post


Link to post
Share on other sites

Dfi Lanparty Ut nF4-D Rev A.00 (Official 06/23/2006)

 

Amd Opteron 146 CABYE 0540 FPMW

 

Scythe Ninja Plus

 

2x512Mb Ocz PC-3200 EL Plat Rev. 2 (TCC5s)

 

Xpertvision 6600 DDR3 [Forceware 84.21 , 440/1200]

 

80Gb Maxtor Diamondback P-ATA

 

32Gb Seagate 7200.10 SATA

 

Creative Sb Live! 5.1

 

BenQ Dw 1640

 

Verudium Vortex 430W

 

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  300

LDT/FSB Frequency Ratio.......................  -  x3

CPU/FSB Frequency Ratio.......................  -  x10

PCI eXpress Frequency.........................  -  105Mhz



CPU VID StartUp Value.........................  -  Default [1.4V]



CPU VID Control...............................  -  1.475v

CPU VID Special Control.......................  -  + 104%

LDT Voltage Control...........................  -  1.20v 

Chip Set Voltage Control......................  -  1.70v

DRAM Voltage Control..........................  -  2.80v [+ 0.3V][/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  200= RAM:FSB = 01:01

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  2.5

RAS# to CAS# delay (Trcd).....................  -  4

Min RAS# active time (Tras)...................  -  5

Row precharge time (Trp)......................  -  3

Row Cycle time (Trc)..........................  -  7 Bus Clocks

Row refresh cyc time (Trfc)...................  -  14 Bus Clocks

Row to Row delay (Trrd).......................  -  03 Bus Clocks

Write recovery time (Twr).....................  -  02 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  8

DRAM Data Drive Strength......................  - 3

Max Async Latency.............................  -  8.0

DRAM Response Time............................  -  Fast

Read Preamble Time............................  -  6.0

IdleCycle Limit...............................  -  16 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  7 x

Bypass Max....................................  -  04 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + Everest Latency + Cpu-Z:

http://i3.photobucket.com/albums/y76/farks...stCpuZPrime.jpg

 

 

3dMark2003 + Cpu-Z:

http://i3.photobucket.com/albums/y76/farksy/03-1.jpg

 

 

3dMark2005 + Cpu-Z:

http://i3.photobucket.com/albums/y76/farksy/05-1.jpg

 

 

3dMark 2006 + Cpu-Z:

http://i3.photobucket.com/albums/y76/farksy/06.jpg

 

==========

 

 

 

short description:

300x10 @ 3004Mhz, 1.500v+104%=1.488v

1:1 @ 2.5-4-3-5 @ 2.84v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D (7/04-2BTA BIOS)

 

AMD Opteron 165 0610dpmw

 

2x1024MB Muskin XP4000 Redline

 

Evga 7900gt KO SC, 580/1580 91.31 drivers

 

2x 80g Seagate 7200.9 SATA hdd in raid 0 & Maxtor 200g SATA hdd

 

BenQ 1650v DVDrom & Plextor PX-760A DVD burner

 

OCZ 700w gamerxstream

 

 

==========

 

[b]Genie BIOS Settings:[/b]
[color=red]
FSB Bus Frequency.............................  -  334
LDT/FSB Frequency Ratio.......................  -  2.5
CPU/FSB Frequency Ratio.......................  -  9.0
PCI eXpress Frequency.........................  -  100Mhz

CPU VID StartUp Value.........................  -  Startup

CPU VID Control...............................  -  1.5
CPU VID Special Control.......................  -  110%
LDT Voltage Control...........................  -  1.20v 
Chip Set Voltage Control......................  -  1.50v
DRAM Voltage Control..........................  -  2.60v[/color]

[b]DRAM Configuration Settings:[/b]
[color=red]
DRAM Frequency Set............................  -  150=RAM/FSB:3/4
Command Per Clock (CPC).......................  -  Enable 
CAS Latency Control (Tcl).....................  -  3.0
RAS# to CAS# delay (Trcd).....................  -  3
Min RAS# active time (Tras)...................  -  8
Row precharge time (Trp)......................  -  2
Row Cycle time (Trc)..........................  -  08 Bus Clocks
Row refresh cyc time (Trfc)...................  -  15 Bus Clocks
Row to Row delay (Trrd).......................  -  02 Bus Clocks
Write recovery time (Twr).....................  -  02 Bus Clocks
Write to Read delay (Twtr)....................  -  01 Bus Clocks
Read to Write delay (Trwt)....................  -  03 Bus Clocks
Refresh Period (Tref).........................  -  3120 Cycles
DRAM Bank Interleave..........................  -  Enabled

DQS Skew Control..............................  -  Auto
DQS Skew Value................................  -  0
DRAM Drive Strength...........................  -  Auto
DRAM Data Drive Strength......................  -  Auto
Max Async Latency.............................  -  10.0
DRAM Response Time............................  -  Normal
Read Preamble Time............................  -  06.0
IdleCycle Limit...............................  -  016 Cycles
Dynamic Counter...............................  -  Disable
R/W Queue Bypass..............................  -  16 x
Bypass Max....................................  -  07 x
32 Byte Granularity...........................  -  Disable(4 Bursts)
[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z + Everest 3 mem write:

 

http://i110.photobucket.com/albums/n87/rac...zx/Screen03.jpg

 

 

3dMark2003 + Everest 3 mem copy:

 

http://i110.photobucket.com/albums/n87/rac...zx/Screen04.jpg

 

 

3dMark2005 + Everest mem latency:

 

http://i110.photobucket.com/albums/n87/rac...zx/Screen05.jpg

 

 

 

3dMark 2006 + Everest mem read + A64 info:

 

http://i110.photobucket.com/albums/n87/rac...zx/Screen06.jpg

 

 

 

==========

 

 

 

short description:

334x9 @ 3006Mhz, 1.65v

3-3-2-8 @ 2.60v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 ULTRA-D (6/23/05 bios)

 

AMD Opteron 165 0550vpmw

 

2x1024MB G.SKiLL HZ SERIES

 

EVGA GeForce 7800GT, 507/1295 nv84.20

 

3x80gb hitachi dekstar raid 0

 

rosewill cd rom

 

ocz powerstream 520w Power Supply

 

 

 

*

*

 

 

 

*

*

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  334

LDT/FSB Frequency Ratio.......................  -  3x

CPU/FSB Frequency Ratio.......................  -  9x

PCI eXpress Frequency.........................  -  101Mhz



CPU VID StartUp Value.........................  -  1.500v



CPU VID Control...............................  -  1.475

CPU VID Special Control.......................  -  113%

LDT Voltage Control...........................  -  1.30v 

Chip Set Voltage Control......................  -  1.60v

DRAM Voltage Control..........................  -  2.70v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  150 (DRAM/FSB:3/04)

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  3

RAS# to CAS# delay (Trcd).....................  -  4

Min RAS# active time (Tras)...................  -  8

Row precharge time (Trp)......................  -  4

Row Cycle time (Trc)..........................  -  12 Bus Clocks

Row refresh cyc time (Trfc)...................  -  AUTO

Row to Row delay (Trrd).......................  -  02 Bus Clocks

Write recovery time (Twr).....................  -  02 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  LEVEL 8

DRAM Data Drive Strength......................  -  LEVEL 1

Max Async Latency.............................  -  Auto

DRAM Response Time............................  -  Normal

Read Preamble Time............................  -  5.5 NS

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z:

 

http://img122.imageshack.us/img122/1513/pic1po5.jpg

 

 

3dMark2003 + EVEREST:

 

http://img122.imageshack.us/img122/4145/pic2mc1.jpg

 

 

3dMark2005:

 

http://img113.imageshack.us/img113/3715/pic3je6.jpg

 

 

 

3dMark 2006:

 

http://img156.imageshack.us/img156/7792/pic4hc2.jpg

 

 

 

==========

 

 

 

short description:

334X9 1.66V

ram DDR500 3-4-4-8 2.7V

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 SLI-DR (7/04-2BTA BIOS)

 

AMD Opteron 165 CCBBE 0617FPMW

 

2x1024MB Munskin Redline XP4000 (991493)

 

EVGA GeForce 7900GTX, 650/1600 91.33 drivers

 

150GB Western Digital Raptor X WD1500AHFD

 

2x 400GB Seagate Barracuda 7200.9 ST3400633AS

 

Khypermedia DVD+RW 8x4x12

 

OCZ PowerStream 520W Power Supply

 

Swiftech H20-220 APEX ULTRA & MCW60 VGA Block

 

 

 

med_IMG_0633.JPG

 

med_IMG_0634.JPG

 

med_IMG_0630.JPG

 

med_IMG_0631.JPG

 

==========

 

[b]Genie BIOS Settings:[/b]
[color=red]
FSB Bus Frequency.............................  -  335
LDT/FSB Frequency Ratio.......................  -  x 3.0
CPU/FSB Frequency Ratio.......................  -  x 9.0
PCI eXpress Frequency.........................  -  100Mhz

CPU VID StartUp Value.........................  -  Startup

CPU VID Control...............................  -  1.425v
CPU VID Special Control.......................  -  110%
LDT Voltage Control...........................  -  1.20v 
Chip Set Voltage Control......................  -  1.50v
DRAM Voltage Control..........................  -  2.80v[/color]

[b]DRAM Configuration Settings:[/b]
[color=red]
DRAM Frequency Set............................  -  166=RAM/FSB:05/06
Command Per Clock (CPC).......................  -  Enable 
CAS Latency Control (Tcl).....................  -  03
RAS# to CAS# delay (Trcd).....................  -  03
Min RAS# active time (Tras)...................  -  01
Row precharge time (Trp)......................  -  02
Row Cycle time (Trc)..........................  -  07 Bus Clocks
Row refresh cyc time (Trfc)...................  -  13 Bus Clocks
Row to Row delay (Trrd).......................  -  00 Bus Clocks
Write recovery time (Twr).....................  -  03 Bus Clocks
Write to Read delay (Twtr)....................  -  01 Bus Clocks
Read to Write delay (Trwt)....................  -  03 Bus Clocks
Refresh Period (Tref).........................  -  3120 Cycles
DRAM Bank Interleave..........................  -  Enabled

DQS Skew Control..............................  -  Increase Skew
DQS Skew Value................................  -  221 
DRAM Drive Strength...........................  -  normal4
DRAM Data Drive Strength......................  -  Level 2
Max Async Latency.............................  -  Auto
DRAM Response Time............................  -  Fast
Read Preamble Time............................  -  Auto
IdleCycle Limit...............................  -  16 Cycles
Dynamic Counter...............................  -  Disable
R/W Queue Bypass..............................  -  16 x
Bypass Max....................................  -  05 x
32 Byte Granularity...........................  -  Disable(4 Bursts)
[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z:

 

med_prime95-cpuz-3dMark2001se-default_settings.PNG

 

 

3dMark2003:

 

med_everest-memread-3dMark03-default_settings.PNG

 

 

3dMark2005:

 

med_everest-memlatency-3dMark05-default_settings.PNG

 

 

3dMark 2006:

 

med_everest-memwrite-3dMark06-default_settings.PNG

 

 

 

==========

 

 

 

short description:

335x9 @ 3015Mhz, 1.425v +110%

3-3-2-1 @ 2.80v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY UT nF4 SLI-DR Expert(12/7/06 BIOS)

 

AMDAthlon64X24400+(89W)1MBL2

 

Crucial Technology Ballistix 1GB (2 x 512MB)pc3200

 

2 x eVGA 6600GT, 490/1310 91.30 drivers

 

HITACHI Deskstar T7K250 x 2/Raid 0 320GBs

 

Lite-0n SOHW-1633s dvd burner

 

Hiper Type-R 580w

 

 

 

*

*

 

 

*

*

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]



FSB Bus Frequency.............................  -  264

LDT/FSB Frequency Ratio.......................  -  auto

CPU/FSB Frequency Ratio.......................  -  x 11

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  auto



CPU VID Control...............................  -  1.400v

CPU VID Special Control.......................  -  Above VID * 104.8

LDT Voltage Control...........................  -  1.40v 

Chip Set Voltage Control......................  -  1.52v

DRAM Voltage Control..........................  -  2.71v



DRAM Configuration Settings:



DRAM Frequency Set............................  -  180=RAM/FSB:09/10

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  2.5

RAS# to CAS# delay (Trcd).....................  -  02 Bus Clocks

Min RAS# active time (Tras)...................  -  06 Bus Clocks

Row precharge time (Trp)......................  -  03 Bus Clocks

Row Cycle time (Trc)..........................  -  09 Bus Clocks

Row refresh cyc time (Trfc)...................  -  12 Bus Clocks

Row to Row delay (Trrd).......................  -  02 Bus Clocks

Write recovery time (Twr).....................  -  02 Bus Clocks

Write to Read delay (Twtr)....................  -  01 Bus Clocks

Read to Write delay (Trwt)....................  -  02 Bus Clocks

Refresh Period (Tref).........................  -  2064 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Auto

DRAM Data Drive Strength......................  -  Auto

Max Async Latency.............................  -  Auto

DRAM Response Time............................  -  Fast

Read Preamble Time............................  -  Auto

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(4 Bursts)





[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z :

 

dualprimes3dmark01a.jpg

 

 

3dMark2003:

 

3dmark03-1.jpg

 

 

3dMark2005:

 

3dmark05.jpg

 

 

3dMark2006:

 

http://img.photobucket.com/albums/v335/Gem...rk06everest.jpg

 

 

 

 

 

==========

 

 

 

short description:

264x11 @ 2.904, 1.400v* 104.8%

2.5-2-3-6 @ 2.71v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 SLI-DR (406 BIOS)

 

AMD X2 3800+ dual core LDBFE 0609 XPMW

 

2x1024MB Crucial Ballistix Z503

 

PowerColor X1900xtx , 675-783 6.7 drivers

 

74GB Western Digital Raptor 10,000RPM SATA hdd's in RAID0 - Windows 64bit

 

NEC 3550a DVD

 

Pc Power and Cooling 1Kw Power Supply

 

DangerDen = TDX + Maze4 + BIX2 + DDC-12v + 38 tubing

 

 

 

 

*

*

*

*

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  270

LDT/FSB Frequency Ratio.......................  -  3

CPU/FSB Frequency Ratio.......................  -  10

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  Auto



CPU VID Control...............................  -  1.425

CPU VID Special Control.......................  -  Auto

LDT Voltage Control...........................  -  1.30v 

Chip Set Voltage Control......................  -  1.60v

DRAM Voltage Control..........................  -  2.70v + .03v (enabled)[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  200=RAM/FSB:01/01

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  3

RAS# to CAS# delay (Trcd).....................  -  3

Min RAS# active time (Tras)...................  -  8

Row precharge time (Trp)......................  -  3

Row Cycle time (Trc)..........................  -  9 Bus Clocks

Row refresh cyc time (Trfc)...................  -  16 Bus Clocks

Row to Row delay (Trrd).......................  -  03 Bus Clocks

Write recovery time (Twr).....................  -  03 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3072 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Lev6

DRAM Data Drive Strength......................  -  Auto

Max Async Latency.............................  -  8

DRAM Response Time............................  -  normal

Read Preamble Time............................  -  5.5

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  04 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z + MBM + A64Tweaker :

 

http://img157.imageshack.us/img157/4096/untitled1up6.jpg

 

 

3dMark2003 + CPU-Z + MBM + A64Tweaker + Everest Writes :

 

http://img225.imageshack.us/img225/2476/untitled2kw1.jpg

 

 

3dMark2005 + CPU-Z + MBM + A64Tweaker + Everest Latency :

 

http://img225.imageshack.us/img225/834/untitled3uv8.jpg

 

 

 

3dMark 2006 + CPU-Z + MBM + A64Tweaker + Everest Reads :

 

http://img90.imageshack.us/img90/8490/untitled4um7.jpg

 

 

 

==========

 

 

 

short description:

270x10 @ 2700Mhz

3-3-8-3 @ 2.6 + 03v vdimm

Share this post


Link to post
Share on other sites

DFI LanpartyUT nF4 Ultra-D (SLI Mod)(BIOS 0406bta)

AMD Athlon64 X2 3800+ Manchester[E4]

2x1024MB Corsair TWINX2048-3200C2PT

2x Gigabyte 6600GT 128Mb, 560/1060 91.33 drivers

2x Hitachi 250 GB SATA II (SATA 1/2)

1x WD Caviar SE16 400GB SATA I (SATA 3)

NEC ND-2510A DVD Burner IDE 1/0

Asus DRW 1608P DVD Burner IDE 1/1

OCZ Modstream 520W

Danger Den TDK block and pump (3/8" ID tubing)

Dell 1905FP LCD Monitor

Hardcano 13 (4 fans and 2 t/c's-waterblock & case)

Kworld VS-LTV883D Xpert video capture card (PCI-2)

 

*

*

*

*

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  250

LDT/FSB Frequency Ratio.......................  -  x3

CPU/FSB Frequency Ratio.......................  -  x10.0

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  StartUp



CPU VID Control...............................  -  1.500V

CPU VID Special Control.......................  -  Auto

LDT Voltage Control...........................  -  1.20v 

Chip Set Voltage Control......................  -  1.50v

DRAM Voltage Control..........................  -  2.70v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  200=RAM/FSB:01/01

Command Per Clock (CPC).......................  -  Auto 

CAS Latency Control (Tcl).....................  -  03 

RAS# to CAS# delay (Trcd).....................  -  03 Bus Clocks

Min RAS# active time (Tras)...................  -  08 Bus Clocks

Row precharge time (Trp)......................  -  03 Bus Clocks

Row Cycle time (Trc)..........................  -  13 Bus Clocks

Row refresh cyc time (Trfc)...................  -  16 Bus Clocks

Row to Row delay (Trrd).......................  -  03 Bus Clocks

Write recovery time (Twr).....................  -  03 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Auto

DRAM Data Drive Strength......................  -  Level4 (Reduce 00%)

Max Async Latency.............................  -  10.0 Nano Seconds

DRAM Response Time............................  -  Normal

Read Preamble Time............................  -  08.0 Nano Seconds

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  04 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.35:

 

http://img145.imageshack.us/img145/4293/pr...01secpuzsh6.jpg

 

 

3dMark2003:

 

http://img19.imageshack.us/img19/7253/3dmark03ur5.jpg

 

 

3dMark2005:

 

http://img19.imageshack.us/img19/8564/3dmark05wx7.jpg

 

 

3dMark 2006:

 

http://img19.imageshack.us/img19/7605/3dmark06hk0.jpg

 

 

Everest 2.20:

 

http://img19.imageshack.us/img19/3383/everest22db1.jpg

 

 

==========

 

 

 

short description:

250x10 @ 2500Mhz, 1.500V

3-3-8-3 @ 2.70v vdimm

Share this post


Link to post
Share on other sites
Guest BFG

DFI LANPARTY nF4 SLI-DR (7/04-2BTA BIOS)

 

AMD 3700+ San Diego

 

2x1024MB G.Skill HZ PC4000

 

eVGA GeForce 7800 GTX 512, 590/1750 81.98 drivers

 

200 Gig Seagate IDE, 160 Gig SATA Seagate

 

NEC Black 16x DVD Burner

 

Enermax Whisper 535w Power Supply

 

 

 

==========

 

[b]Genie BIOS Settings:[/b]
[color=red]
FSB Bus Frequency.............................  -  300
LDT/FSB Frequency Ratio.......................  -  3.0x
CPU/FSB Frequency Ratio.......................  -  x10
PCI eXpress Frequency.........................  -  100Mhz

CPU VID StartUp Value.........................  -  StartUp

CPU VID Control...............................  -  1.475
CPU VID Special Control.......................  -  104%
LDT Voltage Control...........................  -  1.20v 
Chip Set Voltage Control......................  -  1.50v
DRAM Voltage Control..........................  -  2.60v[/color]

[b]DRAM Configuration Settings:[/b]
[color=red]
DRAM Frequency Set............................  -  166=RAM/FSB:05/06
Command Per Clock (CPC).......................  -  Disable
CAS Latency Control (Tcl).....................  -  3
RAS# to CAS# delay (Trcd).....................  -  4
Min RAS# active time (Tras)...................  -  8
Row precharge time (Trp)......................  -  4
Row Cycle time (Trc)..........................  -  8 Bus Clocks
Row refresh cyc time (Trfc)...................  -  14 Bus Clocks
Row to Row delay (Trrd).......................  -  02 Bus Clocks
Write recovery time (Twr).....................  -  02 Bus Clocks
Write to Read delay (Twtr)....................  -  02 Bus Clocks
Read to Write delay (Trwt)....................  -  03 Bus Clocks
Refresh Period (Tref).........................  -  3684 Cycles
DRAM Bank Interleave..........................  -  Enabled

DQS Skew Control..............................  -  Auto
DQS Skew Value................................  -  0
DRAM Drive Strength...........................  -  7
DRAM Data Drive Strength......................  -  Level 3
Max Async Latency.............................  -  8.0ns
DRAM Response Time............................  -  Fast
Read Preamble Time............................  -  5.0ns
IdleCycle Limit...............................  -  256 Cycles
Dynamic Counter...............................  -  Disable
R/W Queue Bypass..............................  -  16 x
Bypass Max....................................  -  07 x
32 Byte Granularity...........................  -  Disable(4 Bursts)
[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z:

 

primefz3.th.jpg

 

 

3dMark2003:

 

3dmark03xh6.th.jpg

 

 

3dMark2005:

 

3dmark05ke7.th.jpg

 

 

3dMark 2006:

 

3dmark06uu9.th.jpg

 

 

Everest 2.20:

 

everestgq2.th.jpg

 

 

 

==========

 

 

 

short description:

300x10 @ 3000Mhz, 1.475 x 104%

3-4-4-8 @ 2.60v vdimm

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...