Jump to content
Sign in to follow this  
Angry_Games

Socket 939 Overclocking Database

Recommended Posts

DFI LANPARTY nF4 SLI-DR - 704-2bta BIOS

 

AMD Opteron 165 dual core CCBBE 0610DPMW

 

OCZ 2GB (2 x 1GB) 184-Pin DDR SDRAM Dual Channel Platinum Model #: OCZ4002048ELDCPE-K

 

Leadtek 7800GTX 256MB, 480mhz/1.25ghz

 

Western Digital Raptor 74GB 3.5" Serial ATA150 Hard Drive

 

NEC 16X DVD±R DVD Burner Black IDE/ATAPI Model ND-3550A flashed to 4551a

 

OCZ PowerStream OCZ600ADJ ATX 600W Power Supply - Retail

 

Zalman cnps9500 led cpu cooler

 

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 315

LDT/FSB Frequency Ratio - x 3.0

CPU/FSB Frequency Ratio - x 9.0

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.350v

 

CPU VID Control - 1.2v

CPU VID Special Control - Above VID * 110%

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.50v

DRAM Voltage Control - 2.80v

 

DRAM Configuration Settings:

DRAM Frequency Set - 150=RAM/FSB:03/04

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2.5

RAS# to CAS# delay (Trcd) - 03 Bus Clocks

Min RAS# active time (Tras) - 05 Bus Clocks

Row precharge time (Trp) - 03 Bus Clocks

Row Cycle time (Trc) - 09 Bus Clocks

Row refresh cyc time (Trfc) - 12 Bus Clocks

Row to Row delay (Trrd) - 03 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 02 Bus Clocks

Refresh Period (Tref) - 1168 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - normal 4

DRAM Data Drive Strength - Level 2

Max Async Latency - 8.0 Nano Seconds

DRAM Response Time - normal

Read Preamble Time - 6.0 Nano Seconds

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 04 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

dual Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest memory read:

 

stock28ghzprime0vd.th.jpg

 

everest memory latency + 3dMark2003 + mbm5:

 

stock28ghz3d20033tc.th.jpg

 

Everest memory write + 3dMark2005 + a64info + mbm5:

 

stock28ghz3d20055ck.th.jpg

 

 

==========

 

 

 

short description:

max @ stock voltage

315*9 @ 2835mhz @ 1.200v + 110%

2.2-3-3-5 @ 2.8v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY UT nF4 SLI-DR Expert - 12/07/05 BIOS

 

AMD Opteron 148 Venus CABNE 0528GPMW

 

(2 x1GB) G.SKILL DDR 500 (PC 4000) F1-4000USU2-2GBHZ UCCC

 

Sapphire X800GTO^2 16p 256MB, 400/980 Cat 6.4drivers

 

2 x Maxtor 6B200RO 200GB IDE hdd (16MB cache)

 

Lite-On 52327S White IDE CD-ROM Drive

 

NEC 16X White DVD Burner 3550A

 

Chaintech AV-710 Envy24 HT-S - 4.73b

 

OCZ PowerStream OCZ520ADJ ATX 520W PSU

 

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 285

LDT/FSB Frequency Ratio - 3X

CPU/FSB Frequency Ratio - 10

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.400v

 

CPU VID Control - 1.400v

CPU VID Special Control - Auto

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.59v

DRAM Voltage Control - 2.60v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200=RAM/FSB:01/01

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 03 Bus Clocks

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 04 Bus Clocks

Row Cycle time (Trc) - 07 Bus Clocks

Row refresh cyc time (Trfc) - 13 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 3684 Cycles

Write CAS Latency (Twcl) - 1

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 3

DRAM Data Drive Strength - Auto (Reports Level 1-Reduce 50% in Everest)

Max Async Latency - 8.0 Nano Seconds

DRAM Response Time - Fastest

Read Preamble Time - 5.0 Nano Seconds

IdleCycle Limit - 16 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 8 x

Bypass Max - 04 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.33.1 + Everest 2.20 Read:

 

http://img132.imageshack.us/img132/5762/link19xf.png

 

 

3dMark2003 + CPU-Z 1.33.1 + Everest 2.20 Write:

 

link20hx.th.png

 

 

3dMark2005 + CPU-Z 1.33.1 + Everest 2.20 Memory Latency:

 

link34rl.th.png

 

 

Aquamark 3d:

 

link41co.th.png

 

 

==========

 

 

 

short description:

285x10 @ 2850Mhz @ 1.400v/1.400v

3-4-4-8 @ 2.60v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY UT CFX3200-DR (5/23 Beta Bios)

 

AMD Opteron 165

 

2x1gb OCZ PlatinumEB PC-4000

 

Sapphire Radeon x1900xt, 621/720 - Catalyst 6.5 Drivers

 

2x80gb Hitachi Deskstar (Raid-0)

 

NEC 16X DVD±R DVD Burner

 

OCZ GameXstream 600w PSU

 

 

*

*

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  290

LDT/FSB Frequency Ratio.......................  -  x 3.0

CPU/FSB Frequency Ratio.......................  -  x 9.0

RD580 HT PLL Speed............................  -  High Speed

HT Bus MMOS Drive Strength....................  -  05

HT Bus PMOS Drive Strength....................  -  05

HT Bus Receiever Impedance....................  -  05

CPU HT Bus Drive Strength.....................  -  Strong



CPU VID Control...............................  -  1.375v

CPU VID Special Control.......................  -  Above VID * 102.9%

DRAM Voltage Control..........................  -  2.67v

SB PCIE Voltage...............................  -  1.80v

NB Analog Voltage.............................  -  1.21v

LDT Bus Voltage...............................  -  1.21v 

NB Core Voltage...............................  -  1.21v

[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  183=RAM/FSB:09/10

Command Per Clock (CPC).......................  -  Enable

CAS Latency Control (Tcl).....................  -  3.0 Bus Clocks

RAS# to CAS# delay (Trcd).....................  -  03 Bus Clocks

Min RAS# active time (Tras)...................  -  08 Bus Clocks

Row precharge time (Trp)......................  -  02 Bus Clocks

Row Cycle time (Trc)..........................  -  08 Bus Clocks

Row refresh cyc time (Trfc)...................  -  14 Bus Clocks

Row to Row delay (Trrd).......................  -  00 Bus Clocks

Write recovery time (Twr).....................  -  02 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  02 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled

Errata 94 Enhancement.........................  -  Disable

Errata 123 Enhancement........................  -  Auto

Odd Divisor Correct...........................  -  Disable



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Level 8

DRAM Data Drive Strength......................  -  Auto

DIMM 1/3 Clock Timing Skew....................  -  Auto

DIMM 2/4 Clock Timing Skew....................  -  Auto

Max Async Latency.............................  -  8.0 ns

Read Preamble Time............................  -  5.0 ns

IdleCycle Limit...............................  -  16 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  5 x

Burst Length..................................  -  4 Bursts

[/color]

 

 

==========

 

 

Dual Prime95 + CPU-Z + Everest Memory Read + 3dMark2001se

 

2600complete0ca.th.jpg

 

*

 

CPU-Z + Everest Memory Latency + 3dMark2003

 

2600032ox.th.jpg

 

*

 

A64info + 3dMark2005

 

2600057vh.th.jpg

 

 

 

==========

 

 

 

short description:

290x9 @ 2609Mhz, 1.375v + 102.9%

3.0-3-2-8 @ 2.67v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 SLI-DR Expert - 04/06/2006 BIOS

 

AMD Athlon64 FX-57 San Diego - CAB2E 0533SPMW

 

2x1024Mb G.Skill HZ PC4000 (UCCC)

 

(2)XFX 7900GTXs in SLI, 685/1760 84.21 Forceware drivers

 

(2)WD 10,000rpm Raptor 36Gb in RAID0; 3x300Gb Maxtor DM10s

 

HP DVD740i Lightscribe DVD Burner

 

OCZ GameXStream OCZ700GXSSLI ATX12V 700W Power Supply - Retail

 

 

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 273Mhz

LDT/FSB Frequency Ratio - x3

CPU/FSB Frequency Ratio - x11

PCI eXpress Frequency - 101Mhz

 

CPU VID StartUp Value - 1.475v

 

CPU VID Control - 1.425v

CPU VID Special Control - Above VID * 109.6%

LDT Voltage Control - 1.30v

Chip Set Voltage Control - 1.56v

DRAM Voltage Control - 2.68v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200=RAM/FSB:01/01

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 03 Bus Clocks

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 04 Bus Clocks

Row Cycle time (Trc) - 07 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 3120 Cycles

Odd Divisor - Disabled

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Auto

DRAM Data Drive Strength - Auto

Max Async Latency - 8.0 Nano Seconds

DRAM Response Time - Fast

Read Preamble Time - Auto

IdleCycle Limit - 128 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 04 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.34.1 + Everest Home Read:

ocpic15qy.th.jpg

 

 

3dMark2003 + CPU-Z 1.34.1 + SuperPi 1M:

3dm010cx.th.jpg

 

 

3dMark2005 + CPU-Z 1.34.1:

3dm051fj.th.jpg

 

Prime Temps:

primetemp6fz.th.jpg

 

CPU-Z Verified: ID# 99305

 

==========

 

 

 

short description:

273x11 @ 3003Mhz, 1.425v + 109.6%

DDR550 @ 3-4-8-4-1T @ 2.68v vDimm

Share this post


Link to post
Share on other sites

LANPARTY UT NF4 SLI-DR Venus - 03/07/06 BIOS

 

AMD Opteron 165 CCBBE0610DPMW

 

Mushkin eXtreme Performance 2GB (2 x 1GB) Redline

 

HIS Radeon X1900 XT IceQ3, 680/810 Stock Voltage, Omega 3.8.252 drivers

 

Hitachi Deskstar T7K250 160GB Serial ATA II 7200RPM Hard Drive w/8MB Buffer x 2 RAID 0

 

Maxtor Maxline III 7L300S0 300GB Serial ATA 1.5Gb 7200RPM Hard Drive w/16MB Buffer

 

Liteon SOHW-1693S 16X Dual Layer DVD±RW Drive (Black)

 

OCZ GameXStream OCZ700GXSSLI ATX12V 700W Power Supply

 

Swiftech STORM Extreme Performance Universal Water-block - Rev 2

 

Swiftech MCP655 Pump

 

Black Ice Pro III Triple 120mm Radiator With D12SL-12 YATE LOON 120mm Case Fans

 

Chipset Cooled By Evercool VC-RE VGACooler

 

Zalman VF700-CU VGA Cooler

 

 

 

 

 

[b]Genie BIOS Settings:[/b]

[color=navy]

FSB Bus Frequency..................... 339

LDT/FSB Frequency Ratio............... 3.0x

CPU/FSB Frequency Ratio............... 9x

PCI Express Frequency................. 100





CPU VID Startup Value................. 1.350

CPU VID Control....................... 1.525

VID Special Control................... 104.8%

LDT Voltage Control................... 1.20V

Chip Set Voltage Control.............. 1.52v

Dram Voltage Control.................. 2.64v[/color]







[b]DRAM Configuration Settings:[/b]

[color=darkgreen]

Dram Frequency Set (Mhz).............. 150=RAM/FSB:03/04

Command Per Clock (CPC)............... Enable

CAS# latency (Tcl).................... 3.0

RAS# to CAS# delay (Trcd)............. 03

Min RAS# active time (Tras)......... . 00

Row Precharge Time (Trp).............. 02

Row Cycle Time (Trc).................. 07

Row refresh timg (Trfc)............... 13

RAS# to RAS# delay (Trrd)............. 00

Write Recovery Time (Twr)............. 02

Wite-to-Read Delay (Twtr)............. 01

Read-to-Write Delay (Trwt)............ 02

Refresh Rate (Tref)................... 3120 Cycles

Write CAS Latency (Twcl)...............01

DRAM Bank Interleaving................ Enabled





DQS Skew Control...................... Auto

DQS Skew Value........................ 0

DRAM Drive Strength................... Level 06

DRAM Data Drive Strength.............. Level 1

Max Asynchronous Latency.............. 09.0

DRAM Response Time.....................Fastest

Read Preamble Time.................... 03.0

IdleCycle Limit........................16

Dynamic Counter....................... Disable

R/W Queue Bypass.......................16X

Bypass Max.............................07X

32-Byte Granularity................... Disable (4 bursts)

[/color]

 

 

 

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.33.1 + Everest 2.01:

 

3050019wl.th.png

 

 

3dMark2003:

 

3050036vb.th.png

 

 

3dMark2005:

 

3050056sm.th.png

 

 

3dMark2006:

 

3050061fc.th.png

 

 

short description:

[email protected] 3050Mhz, 1.525v + 104.8%

3-3-2-0 @ 2.64v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D - 0510Fix-2 BIOS

170 CCBWE 0550UPMW Toledo under Big Typhoon

2x512MB OCZ VX4000 + 2x512Mb Twinmos SP3500

XFX 7900GT 256MB, 550/1644

80GB IDE hdd (8MB cache)

160GB IDE hdd (8MB cache)

Enermax 535w

 

==========

 

Genie BIOS Settings:

FSB Bus Frequency - 270

LDT/FSB Frequency Ratio - 3x

CPU/FSB Frequency Ratio - 10x

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - AUTO

 

CPU VID Control - 1.425v

CPU VID Special Control - Above VID * 113%

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.50v

DRAM Voltage Control - 3.40v

 

DRAM Configuration Settings:

DRAM Frequency Set - 180=RAM/FSB:09/10

Command Per Clock (CPC) - Disable

CAS Latency Control (Tcl) - 2.0

RAS# to CAS# delay (Trcd) - 02 Bus Clocks

Min RAS# active time (Tras) - 05 Bus Clocks

Row precharge time (Trp) - 02 Bus Clocks

Row Cycle time (Trc) - 07 Bus Clocks

Row refresh cyc time (Trfc) - 15 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 01 Bus Clocks

Read to Write delay (Trwt) - 02 Bus Clocks

Refresh Period (Tref) - 3120 Cycles

Write CAS Latency (Twcl) - 01

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 7

DRAM Data Drive Strength - Level 2

Max Async Latency - 9.0 Nano Seconds

DRAM Response Time - Fast

Read Preamble Time - 6.5 Nano Seconds

IdleCycle Limit - 16 Cycles

Dynamic Counter - Enable

R/W Queue Bypass - 16 x

Bypass Max - 04 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE (33439) + CPU-Z 1.33:

 

http://img143.imageshack.us/img143/3773/pr...1is334392bd.jpg

 

 

3dMark2003 (20394) + Everest Read (5910):

 

http://img143.imageshack.us/img143/4333/3d...readis59103.jpg

 

 

3dMark2005 (9645) + Everest Read (2295):

 

http://img143.imageshack.us/img143/9036/3d...riteis22952.jpg

 

 

3dMark2006 (5329) + Everest Latency (48.9ns):

 

http://img301.imageshack.us/img301/3125/3d...atencyis48p.jpg

 

 

==========

 

 

 

short description:

270x10 @ 2700Mhz, 1.425v + 113%

4x512Mb @ 2-2-5-2 @ 3.4v v @ 245MHz

Share this post


Link to post
Share on other sites

DFI NF4 Venus @ 3010MHz - 2G Mushkin XP4000 Black UCC

 

DFI LANPARTY nF4 Venus #D607000349 Bios 03/29/2006

 

AMD Opteron 146 CAB2E 0540 FPMW

 

2x1024 Mushkin XP4000 Black DDR500 UCC (991483)

 

XFX 7800GTX 256MB, 450/1050 Vista x64 drivers

 

3 x WD2500KS SATA II (16M Cache) RAID 0 (750G Array) Read Caching DISABLED

 

NEC-4551 DVD R/RW Silver

 

OCZ PowerStream OCZ520ADJ ATX 520W Power Supply

 

Thermalright XP-90 + ThermalTake A2017 + AS Ceramique

 

Matric Orbital MX-421 LCD Display

 

Silverstone Temjin J-o6 Silver Case

 

*

*

 

My Rig Pics #1 #2

 

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 301

LDT/FSB Frequency Ratio - 3.0

CPU/FSB Frequency Ratio - x10

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - AUTO

 

CPU VID Control - 1.300v

CPU VID Special Control - Above VID * 114.4%

LDT Voltage Control - 1.40v

Chip Set Voltage Control - 1.59v

DRAM Voltage Control - 2.56v

 

DRAM Configuration Settings:

DRAM Frequency Set - 166=RAM/FSB:05/06

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 3.0

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 04 Bus Clocks

Row Cycle time (Trc) - 07 Bus Clocks

Row refresh cyc time (Trfc) - 15 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 04 Bus Clocks

Refresh Period (Tref) - 3684 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 02

DRAM Data Drive Strength - Level 4

Max Async Latency - 8.0 Nano Seconds

DRAM Response Time - Fast

Read Preamble Time - 6.5 Nano Seconds

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 04 x

32 Byte Granularity - Disable (4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.34-1 + Everest 2.80 Ultimate:

 

ocdb0yv.th.jpg

 

3dMark2003:

3d038861s7mg.th.jpg

 

 

3dMark2005:

3d058861s6am.th.jpg

 

3DMark 2006

vista3d20061fj.jpg

 

==========

 

 

 

short description:

300x10 @ 3010Mhz, 1.300v + 114.4%

3.0-4-8-4 @ 2.56v vdimm Vista x64 (Beta 2, Build 5384)

Share this post


Link to post
Share on other sites

DFI LANPARTY CFX3200-DR (5/23/2006 BIOS)

 

AMD Athlon64 X2 4800+ (IHS removed)

 

2 X 1GB Corsair 3500LL PRO

 

Radeon X1900 CrossFire Edition 512MB, 690/1600 CAT 6.5 drivers

 

Radeon X1900XTX 512MB, Default clocks CAT 6.5 drivers

 

2x250GB WD2500ks SATA II hdd raid 0

 

TAGAN TG900-U95 900W Power Supply

 

Thermochill PA120.3 Radiator

 

Swiftech Storm Universal waterblock

 

Laing D5 water pump

 

Danger Den 7/16 (ID) red tubing

 

*

*

 

*

*

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  270

LDT/FSB Frequency Ratio.......................  -  x 4.0

CPU/FSB Frequency Ratio.......................  -  x 10.0

RD580 HT PLL Speed............................  -  High Speed

HT Bus MMOS Drive Strength....................  -  31

HT Bus PMOS Drive Strength....................  -  31

HT Bus Receiever Impedance....................  -  10

CPU HT Bus Drive Strength.....................  -  Strong



CPU VID Control...............................  -  1.50v

CPU VID Special Control.......................  -  Auto

DRAM Voltage Control..........................  -  2.70v

SB PCIE Voltage...............................  -  1.80v

NB Analog Voltage.............................  -  1.34v

LDT Bus Voltage...............................  -  1.21v 

NB Core Voltage...............................  -  1.34v

[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  200=RAM/FSB:01/01

Command Per Clock (CPC).......................  -  Enable

CAS Latency Control (Tcl).....................  -  3.0 Bus Clocks

RAS# to CAS# delay (Trcd).....................  -  03 Bus Clocks

Min RAS# active time (Tras)...................  -  08 Bus Clocks

Row precharge time (Trp)......................  -  02 Bus Clocks

Row Cycle time (Trc)..........................  -  10 Bus Clocks

Row refresh cyc time (Trfc)...................  -  16 Bus Clocks

Row to Row delay (Trrd).......................  -  03 Bus Clocks

Write recovery time (Twr).....................  -  03 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  1560 Cycles

DRAM Bank Interleave..........................  -  Enabled

Errata 94 Enhancement.........................  -  Disable

Errata 123 Enhancement........................  -  Auto

Odd Divisor Correct...........................  -  Disable



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Level 6

DRAM Data Drive Strength......................  -  Level 1 (Reduce 50%)

DIMM 1/3 Clock Timing Skew....................  -  Auto

DIMM 2/4 Clock Timing Skew....................  -  Delay 450ps

Max Async Latency.............................  -  8.0 ns

Read Preamble Time............................  -  6.0 ns

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  7 x

Burst Length..................................  -  4 Bursts

[/color]

 

 

==========

 

Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest 2.01:

 

 

http://img228.imageshack.us/my.php?image=3...1andrest9pt.jpg

 

3dMark2003:

 

http://img207.imageshack.us/my.php?image=3dmark20034ym.jpg

 

3dMark2005:

 

http://img395.imageshack.us/my.php?image=3dmark20052el.jpg

 

3dMark2006:

 

http://img153.imageshack.us/my.php?image=3dmark20062ji.jpg

 

 

==========

 

 

 

short description:

270x10 @ 2700Mhz, 1.50v

3.0-3-8-2 @ 2.70v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 SLI-DR Expert - Tony's 406 BIOS

 

AMD Athlon64 FX-60 Toledo

 

OCZ Platinum Edition 2GB (2 x 1GB) 184-Pin DDR SDRAM DDR 500 (PC 4000) Unbuffered Dual Channel Kit System Memory Model OCZ5002048EBPE-K - Retail

 

2X BFG 7900GTXOC 512MB SLI, 670/1640 91.28 drivers

 

Western Digital 74GB hdd SATA "RAPTOR"(8MB cache)

 

DVD Writer Plextor 716SA SATA

 

 

 

 

 

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 202

LDT/FSB Frequency Ratio - AUTO

CPU/FSB Frequency Ratio - 15

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.400v

 

CPU VID Control - 1.400v

CPU VID Special Control - Above VID * 107.2%

LDT Voltage Control - 1.40v

Chip Set Voltage Control - 1.58v

DRAM Voltage Control - 2.80v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200=RAM/FSB:01/01

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2.5

RAS# to CAS# delay (Trcd) - 03 Bus Clocks

Min RAS# active time (Tras) - 06 Bus Clocks

Row precharge time (Trp) - 02 Bus Clocks

Row Cycle time (Trc) - 10 Bus Clocks

Row refresh cyc time (Trfc) - 15 Bus Clocks

Row to Row delay (Trrd) - 03 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 3072 Cycles

ODD DIVISOR - Disable

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Increase

DQS Skew Value - 200

DRAM Drive Strength - Level 5

DRAM Data Drive Strength - Level 1

Max Async Latency - auto

DRAM Response Time - Normal

Read Preamble Time - auto

IdleCycle Limit - 4 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 4 x

Bypass Max - 02 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.34 + Everest 2.01:

 

http://s2.supload.com/image.php?get=FX-60_...DB_Entry_01.JPG

 

3dMark2003:

http://s2.supload.com/image.php?get=FX-60_...DB_Entry_03.bmp

 

 

3dMark2005:

http://s2.supload.com/image.php?get=FX-60_...DB_Entry_05.JPG

 

 

3dMark2006:

http://s2.supload.com/image.php?get=FX-60_...DB_Entry_06.JPG

 

==========

 

 

 

short description:

202x15 @ 3030Mhz, 1.400v + 107.2%

2.5-3-6-2 @ 2.8v vdimm

Share this post


Link to post
Share on other sites

LANPARTY UT NF4 SLI-DR Venus - 03/07/06 BIOS

 

AMD Opteron 165 CCBBE0610DPMW

 

Mushkin eXtreme Performance 2GB (2 x 1GB) Redline

 

OCZ OCZ5002048EBPE-K 2GB Kit DDR500 PC4000 Platinum Edition

 

HIS Radeon X1900 XT IceQ3, 705/837, Omega 3.8.252 drivers

 

Hitachi Deskstar T7K250 160GB Serial ATA II 7200RPM Hard Drive w/8MB Buffer x 2 RAID 0

 

Maxtor Maxline III 7L300S0 300GB Serial ATA 1.5Gb 7200RPM Hard Drive w/16MB Buffer

 

Liteon SOHW-1693S 16X Dual Layer DVD±RW Drive (Black)

 

OCZ GameXStream OCZ700GXSSLI ATX12V 700W Power Supply

 

Swiftech STORM Extreme Performance Universal Water-block - Rev 2

 

Swiftech MCP655 Pump

 

Black Ice Pro III Triple 120mm Radiator With D12SL-12 YATE LOON 120mm Case Fans

 

Chipset Cooled By Evercool VC-RE VGACooler

 

*

*

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  339

LDT/FSB Frequency Ratio.......................  -  Auto

CPU/FSB Frequency Ratio.......................  -  9.0

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  1.350v



CPU VID Control...............................  -  1.525

CPU VID Special Control.......................  -  104.8

LDT Voltage Control...........................  -  1.20v 

Chip Set Voltage Control......................  -  1.52v

DRAM Voltage Control..........................  -  2.80v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  150=RAM/FSB:03/04

Command Per Clock (CPC).......................  -  Disable 

CAS Latency Control (Tcl).....................  -  3

CAS# to CAS# delay (Trcd).....................  -  3

Min RAS# active time (Tras)...................  -  00

Row precharge time (Trp)......................  -  2

Row Cycle time (Trc)..........................  -  07 Bus Clocks

Row refresh cyc time (Trfc)...................  -  13 Bus Clocks

Row to Row delay (Trrd).......................  -  00 Bus Clocks

Write recovery time (Twr).....................  -  02 Bus Clocks

Write to Read delay (Twtr)....................  -  01 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  06

DRAM Data Drive Strength......................  -  Level 1

Max Async Latency.............................  -  09.0

DRAM Response Time............................  -  Fastest

Read Preamble Time............................  -  05.5

IdleCycle Limit...............................  -  16 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z + Everest 2.20:

 

30500113ru.th.png

 

 

3dMark2003:

 

3050036lf.th.png

 

 

3dMark2005:

 

3050053rk.th.png

 

 

 

3dMark 2006:

 

3050064od.th.png

 

 

 

==========

 

 

 

short description:

339x9 @ 3051Mhz, 1.598V

3-3-0-2 @ 2.80v vdimm

Share this post


Link to post
Share on other sites

Here's my new entry with the CPU and GPU under water cooling, and a few more volts through the 7900:D

 

DFI LANPARTY nF4 SLI-DR Expert (7/04-2BTA BIOS)

 

Naked Core A64 3700+ Toledo (with a disabled core)

 

2x512MB Twinmos (Powerchip)

 

XFX GeForce 7900GT, 715/1890 1.55vCore 2.10vMem 91.31 drivers

 

160GB Seagate SATA II hdd

 

Generic DVD/CD-R/RW

 

Enermax Liberty 500W PSU

 

DangerDen TDX/Maze4 GPU/D5 pump/BI GTS360

 

 

 

 

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  257

LDT/FSB Frequency Ratio.......................  -  X4

CPU/FSB Frequency Ratio.......................  -  X11

PCI eXpress Frequency.........................  -  110Mhz



CPU VID StartUp Value.........................  -  1.475v



CPU VID Control...............................  -  1.475

CPU VID Special Control.......................  -  X 112.0%

LDT Voltage Control...........................  -  1.50v 

Chip Set Voltage Control......................  -  1.62v

DRAM Voltage Control..........................  -  2.92v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  180=RAM/FSB:09/10

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  2.5

RAS# to CAS# delay (Trcd).....................  -  3  Bus Clocks

Min RAS# active time (Tras)...................  -  7  Bus Clocks

Row precharge time (Trp)......................  -  3  Bus Clocks

Row Cycle time (Trc)..........................  -  8 Bus Clocks

Row refresh cyc time (Trfc)...................  -  12 Bus Clocks

Row to Row delay (Trrd).......................  -  02 Bus Clocks

Write recovery time (Twr).....................  -  03 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  02 Bus Clocks

Refresh Period (Tref).........................  -  2064 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Leval 9

DRAM Data Drive Strength......................  -  Leval 4 (Reduce 00%)

Max Async Latency.............................  -  07.0 Nano Seconds

DRAM Response Time............................  -  Fast

Read Preamble Time............................  -  06.0 Nano Seconds

IdleCycle Limit...............................  -  032 Cycles

Dynamic Counter...............................  -  Enable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z:

 

prime8dk.th.jpg

 

Everest Memory Benchies:

 

everest9yu.th.jpg

 

3dMark2003:

 

036ri.th.jpg

 

3dMark2005:

 

055sa.th.jpg

 

 

3dMark 2006:

 

061nc.th.jpg

 

 

 

==========

 

 

 

short description:

257x11 @ 2827Mhz, 1.65 vCore

2.5-3-7-3 @ 2.62v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 SLI-DR EXPERT (E7/04-2BTA BIOS)

 

AMD OPTERON 148 CABYE 0540FPBW

 

TDX CPU BLOCK, SWIFTECH MCP650 @ 14 VOLTS, 280 X 160 HEATER CORE, 4 X 120 PANAFLO, MEANWELL S12-500

 

2x1024M G.SKILL HZ PC4000

 

1 X BFG 7800GT + 1 X EVGA 7800GT/ MAZE4 COOLED, 425/1050 91.31 drivers

 

4 X 36GB Western Digital RaptorS 10,000RPM SATA RAID0

 

SONY DUAL LAYER BURNER

 

OCZ 600 POWERSTREAM SLI

 

 

 

*

*

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  288

LDT/FSB Frequency Ratio.......................  -  X 3

CPU/FSB Frequency Ratio.......................  -  X 11

PCI eXpress Frequency.........................  -  101Mhz



CPU VID StartUp Value.........................  -  1.500v



CPU VID Control...............................  -  1.375

CPU VID Special Control.......................  -  116.8%

LDT Voltage Control...........................  -  1.30v 

Chip Set Voltage Control......................  -  1.52v

DRAM Voltage Control..........................  -  2.61v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  180=RAM/FSB:09/10

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  3

RAS# to CAS# delay (Trcd).....................  -  4

Min RAS# active time (Tras)...................  -  8

Row precharge time (Trp)......................  -  4

Row Cycle time (Trc)..........................  -  8 Bus Clocks

Row refresh cyc time (Trfc)...................  -  16 Bus Clocks

Row to Row delay (Trrd).......................  -  02 Bus Clocks

Write recovery time (Twr).....................  -  02 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3684 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  LEVEL 8

DRAM Data Drive Strength......................  -  LEVEL 2

Max Async Latency.............................  -  8.0NS

DRAM Response Time............................  -  Normal

Read Preamble Time............................  -  5.5NS

IdleCycle Limit...............................  -  128 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  08 x

Bypass Max....................................  -  04 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z + Everest 2.20:

 

http://i31.photobucket.com/albums/c387/CPDMF/OCDB01.jpg

 

3dMark2003:

 

OCDB03.jpg

 

3dMark2005:

 

OCDB05.jpg

 

3dMark 2006:

 

OCDB06.jpg

 

 

==========

 

 

 

short description:

288x11 @ 3169Mhz, 1.61V

3 4 8 4 @ 264/ 2.66v vdimm

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...