Jump to content
Sign in to follow this  
Angry_Games

Socket 939 Overclocking Database

Recommended Posts

DFI LANPARTY nF4 Ultra-D - 5/10/2005-2 BIOS

 

AMD Athlon 64 3200+ Venice Integrated into Chip FSB Socket 939 Processor Model ADA3200BPBOX - Retail - LBBLE 0516

 

OCZ EL Platinum Revision 2 1GB (2 x 512MB) 184-Pin DDR SDRAM Unbuffered DDR 400 (PC 3200) Dual Channel Kit System Memory - Retail

 

Gigabyte GV-NX66128DP GeForce 6600GT Turbo Force Edition PCI Express 128MB DDR Video Card, 73.00 drivers - 500/1120

 

Seagate Barracuda 7200.7 ST3160023A-RK 160GB 7200 RPM 8MB Cache IDE Ultra ATA100 Hard Drive

 

Western Digital Caviar 120GB 3.5" IDE Ultra ATA100 Hard Drive

 

NEC Black IDE DVD Burner

 

Super Flower / TTGI PLUG-N Power 450W Modular Power Supply

 

Thermalright XP-90 aluminum heatpipe heatsink + THERMALTAKE A2218 92MM UFO SERIES LED FAN - BLUE 26.8/81.2CFM 17/47DBA

 

 

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 250

LDT/FSB Frequency Ration - 4

CPU/FSB Frequency Ratio - x 10.0

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.375

 

CPU VID Control - 1.375v

CPU VID Special Control - Avove VID * 110%

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.60v

DRAM Voltage Control - 2.70v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200 (DRAM/FSB:1/01)

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2.5

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 07 Bus Clocks

Row precharge time (Trp) - 03 Bus Clocks

Row Cycle time (Trc) - 07 Bus Clocks

Row refresh cyc time (Trfc) - 14 Bus Clocks

Row to Row delay (Trrd) - 03 Bus Clocks

Write recovery time (Twr) - 03 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 3120 Cycles

Write CAS Latency (Twcl) - 01

DRAM Bank Interleave - Enabled

 

 

 

DQS Skew Control - Increase

DQS Skew Value - 0

DRAM Drive Strength - Level 5

DRAM Data Drive Strength - Level 1

Max Async Latency - 07.0 ns

DRAM Response Time - Fast *** May only be 5/10 BIOS ? ***

Read Preamble Time - 05.0 ns

IdleCycle Limit - 16 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(8 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.26 :

 

http://www4.ncsu.edu/unity/users/j/jbdeese.../OCDB/prime.JPG

 

 

3dMark2003:

 

3Dmark03(2500MHz).JPG

 

 

3dMark2005:

 

3Dmark05(2500Mhz).JPG

 

 

Aquamark 3d:

 

Aquamark(2500MHz).JPG

 

Everest:

 

http://www4.ncsu.edu/unity/users/j/jbdeese...CDB/Everest.JPG

 

 

==========

 

 

 

short description:

250x10 @ 2500Mhz, 1.375v + 110%

2.5-4-3-7 @ 2.7v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D 5/10/2 Fixed

 

AMD Athlon 64 4000+ San Diego Socket 939 Processor CABGE 0515 VPMW stepping

 

2x512MB OCZ VX PC3200

 

Asus EAX850XTPE Cat 5.8 drivers - 565/590

 

2x Western Digital Raptor WD360GD 36.7GB 10,000 RPM Serial ATA150 Hard Drive (RAID-0)

 

OCZ Modstream 520w 24-pin ATX power supply

 

Mach II Standard

 

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 250

LDT/FSB Frequency Ration - 4

CPU/FSB Frequency Ratio - 12

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.45v

 

CPU VID Control - 1.45v

CPU VID Special Control - Avove VID * 113%

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.50v

DRAM Voltage Control - 3.50v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200 (DRAM/FSB:1/01)

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2.0

RAS# to CAS# delay (Trcd) - 02 Bus Clocks

Min RAS# active time (Tras) - 05 Bus Clocks

Row precharge time (Trp) - 02 Bus Clocks

Row Cycle time (Trc) - 07 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 01 Bus Clocks

Read to Write delay (Trwt) - 02 Bus Clocks

Refresh Period (Tref) - 1168 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 8

DRAM Data Drive Strength - Auto

Max Async Latency - Auto

DRAM Response - Normal

Read Preamble Time - Auto

IdleCycle Limit - 16 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.30:

 

primecpuz2001.jpg

 

 

3dMark2003:

 

3D033Ghz.jpg

 

 

3dMark2005:

 

3D053Ghz.jpg

 

 

Aquamark 3d:

 

Aqua3000.jpg

 

 

Everest read:

 

Evread.jpg

 

==========

 

 

short description:

Daily settings

250x12 @ 3000Mhz, 1.425v + 113%

2-2-5-2 @ 3.5v vdimm

To play BF2 without crashing i have to clock down about 50 mhz using these settings.

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 SLI-D 5/10/2005 BIOS

 

AMD Athlon 64 3200+ Venice Socket 939 Processor Model ADA3200BPBOX - LBBLE 0518 stepping

 

2x512MB OCZ EL Platinum Revision 2

 

eVGA 256-P2-N376-AX Geforce 6800GT 256MB 256-bit GDDR3 PCI-Express x16 Video Card , 7.1.2.5 drivers - 409/1100

 

2x HITACHI Deskstar 7K80 HDS728080PLA380 -0A30356 80GB 7200 RPM 8MB Cache Serial ATA II Hard Drive (RAID-0)

 

PCP&Cooling Turbo-Cool 510 Express / SLI

 

THERMALTAKE CL-P0114 120mm Cooling Fan/Heatsink (Big Typhoon

 

*

*

 

 

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 278

LDT/FSB Frequency Ration - 3

CPU/FSB Frequency Ratio - 16 16

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - StartUp

 

CPU VID Control - 1.300v

CPU VID Special Control - Avove VID * 126%

LDT Voltage Control - 1.30v

Chip Set Voltage Control - 1.70v

DRAM Voltage Control - 2.8v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200 (DRAM/FSB:1/01)

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2.5

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 03 Bus Clocks

Row Cycle time (Trc) - 08 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 03 Bus Clocks

Write recovery time (Twr) - 03 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 4708 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

 

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 7

DRAM Data Drive Strength - Level 2

Max Async Latency - 7.0

Read Preamble Time - Auto

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(8 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.29 :

 

http://i11.photobucket.com/albums/a161/mal.../OCDBstable.jpg

 

3dMark2003:

 

3dmark03.jpg

 

 

3dMark2005:

 

3dmark05.jpg

 

Aquamark 3d:

 

 

aqua3.jpg

 

Everest Read:

 

everreadbest.jpg

 

==========

 

 

 

short description:

278 X 9 @ 2502 Mhz, 1.3v + 126%

2.5-4-8-3 @ 2.8v vdimm

Share this post


Link to post
Share on other sites
Guest coldcase

DFI LANPARTY nF4 ULTRA D - 5/10-2 BIOS

 

AMD Athlon 64 3700+ San Diego Socket 939 Processor Model ADA3700DAA5BN - CABGE 0515SPMW stepping

 

2x512MB OCZ PC3200 Plat. Rev2 TCC5

 

1x XFX Geforce 6600GT 128MB 128-bit GDDR3 PCI-Express x16 Video Card

 

1x Western Digital SATA 200G HD

 

1x Western Digital ATA 200G HD

 

LG Black IDE DVD-ROM Drive

 

NEC 3500A Black IDE Burner Drive

 

OCZ Powerstream 520w 24-pin ATX power supply

 

Custom Watercooled

 

*

*

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 290

LDT/FSB Frequency Ration - 3X

CPU/FSB Frequency Ratio - 10X

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.500V

 

CPU VID Control - 1.325v

CPU VID Special Control - Avove VID * 123%

LDT Voltage Control - 1.30v

Chip Set Voltage Control - 1.70v

DRAM Voltage Control - 2.90v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200 (DRAM/FSB:1/01)

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2.5

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 04 Bus Clocks

Row Cycle time (Trc) - 08 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 02 Bus Clocks

Refresh Period (Tref) - 4708 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

 

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 7

DRAM Data Drive Strength - Level 2

Max Async Latency - 7.0ns

DRAM Response Time - Fast

Read Preamble Time - Auto

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(8 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.26 + Everest 1.51:

 

bench_pic1.jpg

 

 

3dMark2003:

 

bench_pic2.jpg

 

 

3dMark2005:

 

bench_pic3.jpg

 

 

Aquamark 3d:

 

bench_pic4.jpg

 

 

==========

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra D NF44 SLI-DR - 3/10/2005 BIOS (DFI official bios)

 

http://www.overclock.co.uk/customer/produc...productid=18208AMD Athlon 64 3200+ Winchester Socket 939 Processor Model ADA3200DIK4BI - ???? 0432 stepping[/url]

 

2x512MB Crucial Ballistix DDR500

 

x800 256MB 256-bit GDDR3 PCI-Express x16 Video , Omega drivers2.6.25a - 443core 544(1088)memory

 

Seagate SERIAL SATA Barracuda 7200.7 200Gb 1.5Gb/s[/url]

 

 

Tagan TG480-U01 480W ATX Silent PSU Retail Boxed

 

Asetek WaterChill Antarctica KT12A-L30 CPU/VGA/Chipset TRIPLE RAD POWER KIT 10mm + 2x Akasa Ultra Quiet Amber Series 120mm Fan

 

*

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 260

LDT/FSB Frequency Ration - 16 -16

CPU/FSB Frequency Ratio - x10

PCI eXpress Frequency - 105Mhz

 

CPU VID StartUp Value - 1.55

 

CPU VID Control - 1.475v

CPU VID Special Control - Avove VID * 110%

LDT Voltage Control - 1.40v

Chip Set Voltage Control - 1.70v

DRAM Voltage Control - 2.90v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200 (DRAM/FSB:1/01)

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2.5

RAS# to CAS# delay (Trcd) - 03 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 03 Bus Clocks

Row Cycle time (Trc) - 07 Bus Clocks

Row refresh cyc time (Trfc) - 12 Bus Clocks

Row to Row delay (Trrd) - 01 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 01 Bus Clocks

Read to Write delay (Trwt) - 02 Bus Clocks

Refresh Period (Tref) - 0388 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

 

 

DQS Skew Control - Decrease skew

DQS Skew Value - 10

DRAM Drive Strength - Level 8

DRAM Data Drive Strength - Level 4

Max Async Latency - 07.0

Read Preamble Time - Auto

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(8 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.26

 

http://img284.echo.cx/my.php?image=prim951jo.jpg

 

 

3dMark2003:

 

3dmak036fj.jpg

 

 

3dMark2005:

 

3dmark051bo.jpg

 

 

Aquamark 3d:

 

aquamark4ny.jpg

 

Everest 1.51

http://img301.imageshack.us/my.php?image=everest3yv.jpg

 

short description:

260x10 @ 2600Mhz, 1.475v + 110%

2.5-3-3-8 @ 2.9v vdimm

 

3dmark 05 much improved with latest omega drivers (2.6.42) = 4801 3d marks

Better late than never. This is a day in day out setup that's been stable for months.

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D - 6/23/2005-2 BIOS

 

AMD Athlon 64 FX55 ClawHammer Socket 939 Processor ADAFX55DEI5AS CAA2C 0512VPMW 1228662C50142

 

2x512MB OCZ EL DDR PC4000 Dual Channel Gold VX

 

XFX PVT18LQT Geforce4 MX4000 64MB DDR AGP 4X/8X Video Card

 

1x Western Digital Raptor WD740GD 74GB 10,000 RPM 8MB Cache Serial ATA150 Hard Drive

 

NEC 16X DVD+R 8X DVD+RW 4X DVD+R DL 16X DVD-R 6X DVD-RW 16X DVD-ROM 48X CD-R 24X CD-RW 48X CD-ROM 2M Cache IDE DVD Burner

 

Antec TRUEPOWERII TPII-550 ATX12V 550W Power Supply

 

DIY External Dual-Core Dual-120mm 1.25 gallon W/C System

 

==== Bios Information ======

 

Genie BIOS Settings:

FSB Bus Frequency - 246

LDT/FSB Frequency Ration - 4

CPU/FSB Frequency Ratio - 11

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.5

 

CPU VID Control - 1.325v

CPU VID Special Control - Above VID * 113%

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.50v

DRAM Voltage Control - 3.3v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200 (DRAM/FSB:1/01)

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 1.5

RAS# to CAS# delay (Trcd) - 02 Bus Clocks

Min RAS# active time (Tras) - 05 Bus Clocks

Row precharge time (Trp) - 02 Bus Clocks

Row Cycle time (Trc) - 07 Bus Clocks

Row refresh cyc time (Trfc) - 15 Bus Clocks

Row to Row delay (Trrd) - 0 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 01 Bus Clocks

Read to Write delay (Trwt) - 02 Bus Clocks

Refresh Period (Tref) - 3072 Cycles

Write CAS Latency (Twcl) - 1

DRAM Bank Interleave - Enabled

 

DQS Skew Control - increase

DQS Skew Value - 128

DRAM Drive Strength - Level 6

DRAM Data Drive Strength - Level 2

Max Async Latency - 7

Response time - Fastest

Read Preamble Time - 5

IdleCycle Limit - 16 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 8 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

=====Prime95, 3dMark2001SE, CPU-Z=====

 

http://i5.photobucket.com/albums/y192/Timp...PrimeStable.png

 

=====3dMark03, SuperPi 32meg, Everest write=====

 

http://i5.photobucket.com/albums/y192/Timp...mark03Final.png

 

=====3dMark05, Everest read=====

 

3dmark05Final.png

 

=====aquaMark3, occt, S&M=====

 

aquamark3Final.png

 

=====short description=====

 

246x11 @ 2706Mhz, 1.325v + 113%

1.5-2-2-5 @ 3.38v vdimm

 

** If the pics are bigger then 800600 you need to use the [bimg] tags.. !!!!!!!!!!! Thanks THunDA..

Share this post


Link to post
Share on other sites

Short description:

260x10 @ 2600Mhz, 1.250v + 126%

2-2-5-2 @ 3.5v vdimm

BIOS VERSION = 3-10

 

DFI LANPARTY nF4 SLi-DR

 

AMD Athlon 64 3200+ Venice OEM (0516 EPGW)

 

BFG Geforce 6800GT 256MB GDDR3 PCI-Express x16 (stock clocks)

 

OCZ 520W Powerstream

 

OCZ 1GB (2 x 512MB) 184-Pin DDR SDRAM DDR 500 (PC 4000) Unbuffered Dual Channel Kit System Memory Model OCZ5001024ELDCGEVX-K

 

Lian Li PC 6099B

 

Thermalright XP90c + Panaflo 92mm High Speed

 

 

-===========================-

 

 

Genie BIOS Settings:

FSB Bus Frequency - 260

LDT/FSB Frequency Ratio - 4

CPU/FSB Frequency Ratio - X 10.0

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - StartUp

 

CPU VID Control - 1.250v

CPU VID Special Control - Avove VID * 126%

LDT Voltage Control - 1.40v

Chip Set Voltage Control - 1.70v

DRAM Voltage Control - 3.50v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200 (DRAM/FSB:1/01)

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 1.5

RAS# to CAS# delay (Trcd) - 02 Bus Clocks

Min RAS# active time (Tras) - 05 Bus Clocks

Row precharge time (Trp) - 02 Bus Clocks

Row Cycle time (Trc) - 07 Bus Clocks

Row refresh cyc time (Trfc) - 15 Bus Clocks

Row to Row delay (Trrd) - 00 Bus Clocks

Write recovery time (Twr) - 03 Bus Clocks

Write to Read delay (Twtr) - 01 Bus Clocks

Read to Write delay (Trwt) - 01 Bus Clocks

Refresh Period (Tref) - Auto

Write CAS Latency (Twcl) - 01

DRAM Bank Interleave - Enabled

 

 

 

DQS Skew Control - Increase

DQS Skew Value - 255

DRAM Drive Strength - Level 5

DRAM Data Drive Strength - Level 2

Max Async Latency - 7 ns

Read Preamble Time - 5.5 ns

IdleCycle Limit - 32 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 8 x

Bypass Max - 07 x

32 Byte Granularity - Disable(8 Bursts)

 

 

-===========================-

 

Prime95 + 3dMark2001SE + CPU-Z + Everest:

 

http://img343.imageshack.us/img343/8364/260010gn.jpg

 

3dMark2003:

 

http://img343.imageshack.us/img343/9959/260028zm.jpg

 

3dMark2005:

 

http://img343.imageshack.us/my.php?image=260042ex.jpg

 

Aquamark 3d:

 

http://img343.imageshack.us/my.php?image=260030og.jpg

 

For searching: 3200 venice ocz vx 4000

 

EDIT: Adding BFG 7800 GTX (at stock out of the box clocks) Scores with SAME timings/speed as above.

 

3dMark2001 SE:

http://img349.imageshack.us/img349/296/26007800017yc.jpg

 

3dMark2003:

http://img349.imageshack.us/my.php?image=26007800032nd.jpg

 

3dMark2005:

http://img349.imageshack.us/my.php?image=26007800059hl.jpg

 

Aquamark 3d:

http://img349.imageshack.us/my.php?image=26007800aq4kp.jpg

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D - 6/23-2 BIOS , IOSS Bios Savior RD1-PMC4

 

AMD 64 4000 (IHS Removed) Sandiego Socket 939 Processor Model ADA4000BNBOX - 0515 stepping week

 

OCZ PC3200rev2 4x512mb = 2048mb's TCC5

 

Powercolor X850Xt vgpu + vdd mods , ZALMAN VF700-CU 2 Ball VGA COOLER.. Official Cat 5.7's 580-621

 

2x Western Digital Raptor WD360GD 36.7GB 10,000 RPM Serial ATA150 Hard Drive (RAID-0) 16k-16k

 

Maxtor DiamondMax 10 120GB 3.5" Serial ATA150 Hard Drive

 

Asus CRW-5224A CD-RW burner

 

OCZ 600watt PowerStream PSU

 

Thermalright SLK948 heatsink , VANTEC TD9238H 92mm 2 Ball Cooling Fan

 

COOLER MASTER CM Stacker STC-T01-UW Black/ Silver Computer Case

 

COOLER MASTER ALD-V03-UK Black Digital function panel

 

4x YS-TECH 120X25MM 4-PIN CASE FAN 105.0CFM 45.0DBA

 

*

*

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 264

LDT/FSB Frequency Ration - Auto

CPU/FSB Frequency Ratio - 11

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.55v

 

CPU VID Control - 1.325v

CPU VID Special Control - Avove VID * 126%

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.60v

DRAM Voltage Control - 2.90v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200 (DRAM/FSB:1/01)

Command Per Clock (CPC) - Disable

CAS Latency Control (Tcl) - 2.5

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 03 Bus Clocks

Row Cycle time (Trc) - 09 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 01 Bus Clocks

Read to Write delay (Trwt) - 02 Bus Clocks

Refresh Period (Tref) - 3120 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

 

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 7

DRAM Data Drive Strength - Level 2

Max Async Latency - 8

DRAM Response Time - Fast

Read Preamble Time - 5.5

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(8 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + 2x CPU-Z + MBM + A64Tweaker + RivaTuner vid clocks :

 

ocdb14mj.jpg

 

 

3dMark2003 + Everest + SuperPi 32m + MBM :

 

ocdb22cf.jpg

 

 

3dMark2005 :

 

ocdb37ix.jpg

 

 

Aquamark 3d:

 

ocdb42vk.jpg

 

 

==========

 

short description:

264x11 @ 2904Mhz, 1.325v + 126%

4x512mb's @ 2.5-4-8-3 @ 2.9v vdimm

Share this post


Link to post
Share on other sites

DFI LanParty NF4 SLI-DR (6/23-2 BIOS)

AMD Athlon64 Winchester 3200+ socket 939

2x1024MB OCZ PC3200 Platinum OCZ4002048ELDCPE-K

Nvidia 6800GT PCI-Express 384/1071, 76.41 drivers

WD Raptor 36GB 10,000RPM SATA hdd

Asus 52x Quietdrive CD-ROM

OCZ 600w Powerstream psu

DangerDen TDX watercooling

 

*

*

2gb_3200_220x10-7.jpg

 

2gb_3200_220x10-7a.jpg

 

2gb_3200_220x10-8.jpg

 

2gb_3200_220x10-8a.jpg

 

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 220

LDT/FSB Frequency Ration - Auto

CPU/FSB Frequency Ratio - 10

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.500v

 

CPU VID Control - 1.300v

CPU VID Special Control - Avove VID * 110%

LDT Voltage Control - 1.40v

Chip Set Voltage Control - 1.70v

DRAM Voltage Control - 2.80v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200 (DRAM/FSB:1/01)

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2.5

RAS# to CAS# delay (Trcd) - 03 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 03 Bus Clocks

Row Cycle time (Trc) - 13 Bus Clocks

Row refresh cyc time (Trfc) - 17 Bus Clocks

Row to Row delay (Trrd) - 03 Bus Clocks

Write recovery time (Twr) - 03 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - Auto

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

 

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Auto

DRAM Data Drive Strength - Level 2

Max Async Latency - 8.0 Nano Seconds

DRAM Response Time - Normal

Read Preamble Time - 6.0 Nano Seconds

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

Prime95 + 3dMark01 + Everest 2.01 + cpu-z

http://www.angrygames.com/ocdb/angry/2x1gb...00_220x10-1.jpg

 

2gb_3200_220x10-2.jpg

 

2gb_3200_220x10-3.jpg

 

2gb_3200_220x10-4.jpg

 

2gb_3200_220x10-5b.jpg

 

2gb_3200_220x10-5c.jpg

 

 

full prime load temps:

http://www.angrygames.com/ocdb/angry/2x1gb...00_220x10-6.jpg

 

 

==============

 

short description:

220x10 @ 2200Mhz, 1.300v + 110%

2x1024MB, 2.5-3-8-3 @ 2.8v vdimm

 

==============

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 SLI-DR - 6/23-2 BIOS

 

AMD Athlon 64 3000+ Venice Socket 939 Processor Model ADA3000BPBOX - LBBLE 0517 EPAW stepping

 

2x512MB OCZ EL Platinum revision 2 V1.1 TCC5 memory

 

Sapphire Radeon X850XT 256MB GDDR3 PCI-Express,ViVO,Dual DVI-ICATALYST 5.7 - 618/615

 

2x Samsung SpinPoint P80SD 80GB SATA2 8MB 7200RPM NCQ (RAID-0)

 

Plextor PX-716A - DVD±RW

 

Silverstone ST65ZF 650W PSU SLI-Certified, Dual PCI-E, 20/24pin

 

Thermalright XP-120 aluminum heatpipe heatsink + Papst 4412FGML 120x120x25mm

 

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 300

LDT/FSB Frequency Ration - x3

CPU/FSB Frequency Ratio - x9

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.5000v

 

CPU VID Control - 1.300v

CPU VID Special Control - Avove VID * 123%

LDT Voltage Control - 1.30v

Chip Set Voltage Control - 1.70v

DRAM Voltage Control - 2.90v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200 (DRAM/FSB:1/01)

Command Per Clock (CPC) - Disable

CAS Latency Control (Tcl) - 2.5

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 04 Bus Clocks

Row Cycle time (Trc) - 12 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 03 Bus Clocks

Write recovery time (Twr) - 03 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 4708 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

 

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 7

DRAM Data Drive Strength - Level 2

Max Async Latency - 09.0 Nano Seconds

Read Preamble Time - 05.0 Nano Seconds

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.26 + Everest 1.51:

 

http://img297.imageshack.us/my.php?image=pic14jb.jpg

 

3dMark2003:

 

http://img297.imageshack.us/my.php?image=pic26kv.jpg

 

 

3dMark2005:

 

http://img297.imageshack.us/my.php?image=pic36bc.jpg

 

 

Aquamark 3d:

 

http://img345.imageshack.us/my.php?image=pic45mx.jpg

 

==========

 

 

 

short description:

300x9 @ 2700Mhz, 1.300v + 123%

2.5-4-8-4 @ 2.93v vdimm

Share this post


Link to post
Share on other sites

DFI Lanparty NF4 Ultra-D - 06/23-05 BIOS

 

Athlon 64 3700+ San Diego

 

2x512mb OCZ PC4000EL VX Gold

 

Nvidia GeForce 7800 GTX (Benches w/clocks @490/1300 default)

 

2X WD 74GB Raptors RAID-0

 

Plextor 716 DVD/CD

 

Enermax 600W SLI

 

Koolance EXOS-AL w/GPU L60 and CPU-300 Waterblocks

(Processor will actually do [email protected]+ async, but 250MHz FSB(HTT) only prime stable with VX)

 

 

==========

 

 

Genie BIOS Settings:

 

FSB Bus Frequency - 250

LDT/FSB Frequency Ratio - 4X

CPU/FSB Frequency Ratio - 11X

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.50V

 

CPU VID Control - 1.35V

CPU VID Special Control - Above VID * 123%

LDT Voltage Control - 1.30v

Chip Set Voltage Control - 1.50v

DRAM Voltage Control - 3.30v

 

 

DRAM Configuration Settings:

 

DRAM Frequency Set - 200 (DRAM/FSB:1/01)

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2.0

RAS# to CAS# delay (Trcd) - 02 Bus Clocks

Min RAS# active time (Tras) - 06 Bus Clocks

Row precharge time (Trp) - 02 Bus Clocks

Row Cycle time (Trc) - 07 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 03 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 02 Bus Clocks

Refresh Period (Tref) - 3120

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

 

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 8

DRAM Data Drive Strength - Level 2

Max Async Latency - 7ns

DRAM Response Time - Fastest

Read Preamble Time - Auto

IdleCycle Limit - 16 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

Prime95+3DMark01+CPU-Z 1.29 (Vcore is wrong it is 1.6V)

 

http://i22.photobucket.com/albums/b306/ana...PU_Mem_3D01.jpg

 

Everest Read:

http://i22.photobucket.com/albums/b306/ana...verest_Read.jpg

http://i22.photobucket.com/albums/b306/ana...verest_Read.jpg

 

Aquamark:

http://i22.photobucket.com/albums/b306/ana...13/Aquamark.jpg

 

3DMark05:

http://i22.photobucket.com/albums/b306/ana...13/3Dmark05.jpg

 

3DMark03

http://i22.photobucket.com/albums/b306/ana...13/3Dmark03.jpg

 

 

 

short description:

250x11 @ 2750Mhz, 1.350v + 123%

2-2-6-2 @ 3.3v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY UT nF4 SLI-DR NF4 SLI-DR - 6-23-05 official bios

 

AMD 64 3000+ OEM ADA3000DIK4BI - CBBID 0503 stepping

 

2X512 OCZ PC 4000 Dual Channel Kit System Memory - Retail- OCZ5001024ELDCGEVX-K - WINBOND UTT - 260 HTT @ 2-2-2-8 @ 3.4V

 

2X XFX PVT45GUDF3 Geforce 6800GT 256MB 256-bit GDDR3 PCI Express x16 Video Card , 77.72 drivers - 416/1.4

 

SAMSUNG SpinPoint P Series 40GB 3.5" IDE Ultra ATA133 Hard Drive

 

2x Western Digital Caviar SE WD1200JS 120GB 7200 RPM 8MB Cache Serial ATA II Hard Drive

 

LITE-ON Black IDE DVD-ROM Drive Model SOHD-16P9S Black

 

LITE-ON Black IDE CD Burner Model SOHR-5239V BK RT

 

ENERMAX All in One Noisetaker Series EG701AX-VE SFMA(24P) 600W Power Supply

 

Lian Li PC-V2000A Silver Computer Case

 

COOLING

 

Copper TDX Block for Athlon64 754/939/940

 

Black Ice Pro Radiator

 

Danger Den Dual 3 1/2" Floppy Bay Reservoir

 

Hydor L35

 

*

*

http://specter-sniper.275mb.com/rigs.htm

 

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 260

LDT/FSB Frequency Ration - 4

CPU/FSB Frequency Ratio - 9

PCI eXpress Frequency - 101Mhz

 

CPU VID StartUp Value - 1.525v

 

CPU VID Control - 1.450v

CPU VID Special Control - Avove VID * 110%

LDT Voltage Control - 1.30v

Chip Set Voltage Control - 1.60v

DRAM Voltage Control - 3.40v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200 (DRAM/FSB:1/01)

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2.0

RAS# to CAS# delay (Trcd) - 02 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 02 Bus Clocks

Row Cycle time (Trc) - 07 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 02 Bus Clocks

Refresh Period (Tref) - 3120 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

 

 

DQS Skew Control - Increase skew

DQS Skew Value - 0

DRAM Drive Strength - Level 8

DRAM Data Drive Strength - Level 3

Max Async Latency - 08.0 Nano Seconds

Read Preamble Time - Auto

IdleCycle Limit - 016 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

===============================

 

http://valid.x86-secret.com/show_oc.php?id=29016

 

Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest 2.01:

 

http://forums.ocmodshop.com/attach.aspx/230/p9501.jpg

 

3dMark2003:

 

http://forums.ocmodshop.com/attach.aspx/226/3d03.jpg

 

 

3dMark2005:

 

http://forums.ocmodshop.com/attach.aspx/227/3d05.jpg

 

 

Aquamark 3d:

 

http://forums.ocmodshop.com/attach.aspx/228/am3884.jpg

 

 

==========

 

 

 

short description:

260x9 @ 2340Mhz, 1.450v + 110%

2-2-8-2 @ 3.4v vdimm

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...