Jump to content
Sign in to follow this  
Angry_Games

Socket 939 Overclocking Database

Recommended Posts

DFI LANPARTY nF4 SLI-DR (7/04-2BTA BIOS)

 

AMD X2 3800+ dual core

 

2x512MB OCZ Gold Rev2 PC4000 (OCZ5001024ELDCGER2) (Hynix-based)

 

GeForce 6800GT, 390/1050 81.89 drivers

 

Western Digital Raptor 36GB 10,000RPM SATA hdd

 

Asus 52x Quiet-Trak CD-ROM

 

Skyhawk 520w 24-pin ATX power supply

 

 

 

*

*

 

bios_hynixocz_3800_250x10-1.gif

 

bios_hynixocz_3800_250x10-2.gif

 

bios_hynixocz_3800_250x10-3.gif

 

 

*

*

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  250

LDT/FSB Frequency Ratio.......................  -  Auto

CPU/FSB Frequency Ratio.......................  -  Auto

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  1.500v



CPU VID Control...............................  -  1.350v

CPU VID Special Control.......................  -  110%

LDT Voltage Control...........................  -  1.20v 

Chip Set Voltage Control......................  -  1.50v

DRAM Voltage Control..........................  -  2.90v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  200=RAM/FSB:01/01

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  2.5

RAS# to CAS# delay (Trcd).....................  -  04 Bus Clocks

Min RAS# active time (Tras)...................  -  10 Bus Clocks

Row precharge time (Trp)......................  -  04 Bus Clocks

Row Cycle time (Trc)..........................  -  12 Bus Clocks

Row refresh cyc time (Trfc)...................  -  24 Bus Clocks

Row to Row delay (Trrd).......................  -  03 Bus Clocks

Write recovery time (Twr).....................  -  03 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Auto

DRAM Data Drive Strength......................  -  Auto

Max Async Latency.............................  -  Auto

DRAM Response Time............................  -  Normal

Read Preamble Time............................  -  Auto

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  04 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest 2.01:

 

http://www.angrygames.com/ocdb/angry/nf4/h...00_250x10-1.gif

 

 

3dMark2003:

 

hynixocz_3800_250x10-2.gif

 

 

3dMark2005:

 

hynixocz_3800_250x10-3.gif

 

 

Aquamark 3d:

 

hynixocz_3800_250x10-4.gif

 

 

 

 

==========

 

 

 

short description:

200x10 @ 2500Mhz, 1.350v + 110%

2.5-4-10-4 @ 2.90v vdimm

Share this post


Link to post
Share on other sites

DFI Ultra-D - 704-2Bta

 

x2 3800 Retail - LDBHE 0538RPMW

 

2x512mb Mushkin PC3500 Lev2 BH5(Yellow Slots)

 

Power Color x850xt 1.66vGpu @ 630/630 w/5.12 Omega's

 

2x 36gig Raptors Raid0

 

ASUS IDE CD-ROM Drive

 

OCZ 600w Power Stream SLI Edition

 

DangerDen = TDX + Maze4 + BIX2 + DDC-12v + 38 tubing

 

*

*

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 289

LDT/FSB Frequency Ratio - 3

CPU/FSB Frequency Ratio - 9

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.50v

 

CPU VID Control - 1.55v

CPU VID Special Control - Auto

LDT Voltage Control - 1.3v

Chip Set Voltage Control - 1.6v

DRAM Voltage Control - 3.5 + .03v

 

DRAM Configuration Settings:

DRAM Frequency Set - 180 (9:10)

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2

RAS# to CAS# delay (Trcd) - 2 Bus Clocks

Min RAS# active time (Tras) - 5 Bus Clocks

Row precharge time (Trp) - 2 Bus Clocks

Row Cycle time (Trc) - 7 Bus Clocks

Row refresh cyc time (Trfc) - 15 Bus Clocks

Row to Row delay (Trrd) - 2 Bus Clocks

Write recovery time (Twr) - 2 Bus Clocks

Write to Read delay (Twtr) - 1 Bus Clocks

Read to Write delay (Trwt) - 2 Bus Clocks

Refresh Period (Tref) - 3072

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Normal 3

DRAM Data Drive Strength - 1

Max Async Latency - 8

DRAM Response Time - Fast

Read Preamble Time - 5

IdleCycle Limit - 16 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

 

==========

 

 

2x Prime95 + 3dMark2001SE + 2xCPU-Z + MBM + a64Tweaker :

 

untitledmedium8sx.jpg

 

 

3dMark2003 + Everest :

 

untitled2medium1eh.jpg

 

 

3dMark2005 :

 

untitled38tp.jpg

 

 

 

==========

 

 

 

short description:

289x9=2601mhz

Ram @ 260mhz 2-2-5-2-7-15 3.5vdimm + .03v

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Expert SLI-DR (12/7/05 BIOS)

 

AMD Opteron X2 165 CCBWE 0546MPMW

 

2x1024 Crucial Ballistix PC4000

 

BFG GeForce 7800GT OC, 81.95 driver 500/1250

 

2x Maxtor DiamondMax10 SATA RAID0 striped

 

Lite On SOHW-1633S

 

PC P&C 510 ASL

 

DangerDen D4 Pump / Copper TDX Waterblock (lapped)

 

 

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 315

LDT/FSB Frequency Ratio - 3.0

CPU/FSB Frequency Ratio - 9.0

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.500v

 

CPU VID Control - 1.525v

CPU VID Special Control - Above VID * 112%

LDT Voltage Control - 1.40v

Chip Set Voltage Control - 1.68v

DRAM Voltage Control - 2.80v

 

DRAM Configuration Settings:

DRAM Frequency Set - 180=RAM/FSB:09/10

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 3

RAS# to CAS# delay (Trcd) - 3 Bus Clocks

Min RAS# active time (Tras) - 8 Bus Clocks

Row precharge time (Trp) - 3 Bus Clocks

Row Cycle time (Trc) - 09 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 03 Bus Clocks

Write recovery time (Twr) - 03 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - Auto

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Auto

DRAM Data Drive Strength - Auto

Max Async Latency - Auto

DRAM Response Time - Normal

Read Preamble Time - Auto

IdleCycle Limit - 016 Cycles

Dynamic Counter - Enable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest 2.01:

 

stable315x9.jpg

 

 

3dMark2003:

 

3dmark03315x9.jpg

 

 

3dMark2005:

 

3dmark05315x9.jpg

 

everest315x9.jpg

 

 

 

==========

 

 

 

short description:

315x9 @ 2835Mhz, 1.525v + 112%

3-3-8-3 @ 2.8v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D - 7/04-2 BigToe BIOS

 

AMD Athlon64 3700+San Diego

 

2x512MB OCZ PC3700 Gold Revision3

 

ChainTech 7800GT 256MB (435/1100 81.85 drivers)

 

WD Raptors 2X74GB RAID0

 

LiteOn DVD-RW SOHW-1673S/LiteOn CD-RW LTR-52327S

 

OCZ PowerStream OCZ520ADJ ATX 520W Power Supply

*

*

==========

 

Genie BIOS Settings:

FSB Bus Frequency - 280

LDT/FSB Frequency Ratio - 3

CPU/FSB Frequency Ratio - 10

PCI eXpress Frequency - 102Mhz

 

CPU VID StartUp Value - 1.425v

 

CPU VID Control - 1.375v

CPU VID Special Control - Above VID * 113%

LDT Voltage Control - 1.30v

Chip Set Voltage Control - 1.70v

DRAM Voltage Control - 2.90v

 

DRAM Configuration Settings:

DRAM Frequency Set - 180=RAM/FSB:09/10

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2.5

RAS# to CAS# delay (Trcd) - 03 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 03 Bus Clocks

Row Cycle time (Trc) - 08 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 02 Bus Clocks

Refresh Period (Tref) - 3120 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Increase

DQS Skew Value - 50

DRAM Drive Strength - Normal4

DRAM Data Drive Strength - Level 2

Max Async Latency - 7.0 Nano Seconds

DRAM Response Time - Fast

Read Preamble Time - 5.0 Nano Seconds

IdleCycle Limit - 016 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

==========

 

Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest Ultimate 2006:

 

dfibenchmarks1280x101805jx.th.jpg

 

3dMark2003:

 

3dmark03280x101809wo.th.jpg

 

3dMark2005:

 

3dmark05280x101806oe.th.jpg

 

Aquamark 3d:

 

aquamark280x101803uv.th.jpg

 

==========

 

short description:

280x10 @ 2800Mhz, 1.375v + 113%

2.5-3-8-3 @ 2.90v vdimm

Share this post


Link to post
Share on other sites

DFI Ultra-D - Bios 623-3

 

Venice 3200 (0515)

 

2x512mb Centon Advance PC4400 TCCD(Orange Slots)

 

Power Color x850xt 1.66vGpu @ 630/630 w/5.12 Omega's

 

2x 36gig Raptors Raid0

 

ASUS IDE CD-ROM Drive

 

OCZ 600w Power Stream SLI Edition

 

DangerDen = TDX + Maze4 + BIX2 + DDC-12v + 38 tubing

 

*

*

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 280

LDT/FSB Frequency Ratio - 3

CPU/FSB Frequency Ratio - 10

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.475v

 

CPU VID Control - 1.475v

CPU VID Special Control - 113%

LDT Voltage Control - 1.3v

Chip Set Voltage Control - 1.6v

DRAM Voltage Control - 2.9 + .03v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200 1:1

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2.5

RAS# to CAS# delay (Trcd) - 4 Bus Clocks

Min RAS# active time (Tras) - 8 Bus Clocks

Row precharge time (Trp) - 4 Bus Clocks

Row Cycle time (Trc) - 9 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 3 Bus Clocks

Write recovery time (Twr) - 3 Bus Clocks

Write to Read delay (Twtr) - 2 Bus Clocks

Read to Write delay (Trwt) - 3 Bus Clocks

Refresh Period (Tref) - 4708

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - 7

DRAM Data Drive Strength - 3

Max Async Latency - 8

DRAM Response Time - Normal

Read Preamble Time - 6

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

 

==========

 

 

Prime95 + 3dMark2001SE + 2xCPU-Z + MBM :

 

http://img355.imageshack.us/img355/7070/un...edmedium1oi.jpg

 

 

3dMark2003 :

 

http://img355.imageshack.us/img355/2166/untitled23tt.jpg

 

 

3dMark2005 + Everest :

 

http://img355.imageshack.us/img355/5443/un...d3medium6bd.jpg

 

 

 

==========

 

 

 

short description:

280x10=2800mhz

Ram @ 280mhz 2.5-4-8-4-9-16

Share this post


Link to post
Share on other sites

DFI|NF4 LANPARTY UT nF4 SLI-DR - 6/23/05 BIOS

 

AMD Athlon64 3200+ Venice (e3)

 

2x1024MB OCZ PC3200 Platinum OCZ4002048ELDCPE-K

 

eVGA 7800 GT 256-P2-N518, 496/1220 used in 2nd pci-e slot @ 8x (to make room for chipset HS)

 

Samsung Spinpoint 160GB SATA (8MB cache)

 

Pioneer A06 DVD+/-RW Drive

 

Antec NeoHE430 430W (from Antec p150 case)

 

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 270

LDT/FSB Frequency Ratio - 3x

CPU/FSB Frequency Ratio - 10x

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.450v

 

CPU VID Control - 1.275v

CPU VID Special Control - Above VID * 123%

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.60v

DRAM Voltage Control - 2.80v

 

DRAM Configuration Settings:

DRAM Frequency Set - 166 (DRAM/FSB:5/06)

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2.5

RAS# to CAS# delay (Trcd) - 03 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 03 Bus Clocks

Row Cycle time (Trc) - 13 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 03 Bus Clocks

Write recovery time (Twr) - 03 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - Auto

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

 

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Auto

DRAM Data Drive Strength - Auto

Max Async Latency - Auto

DRAM Response Time - Normal

Read Preamble Time - Auto

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

Benchmarks done with 7800gt @ 496/1220 and at 8x

 

Prime95 (10h20m) + CPU-Z 1.30 + 3dmark01se:

 

http://s93009101.onlinehome.us/ocdbss/pic1.jpg

 

 

3dMark2003:

 

pic2.jpg

 

 

3dMark2005+Everest Home Edition:

 

pic3.jpg

 

 

==========

 

short description:

270x10 @ 2700Mhz, 1.275v + 123%

2x1024MB, 2.5-3-3-8 @ 2.8v vdimm

Share this post


Link to post
Share on other sites

DFI LP UT nF4 SLI-D BIOS 623 nForce4 6.70

 

3500+ VeniceE6

 

2x512 Corsair XMS 3200C2 (TCCX)

 

evga 7800GTX 500/1270 81.98

 

WD Raptor 36GB / 2x Hitachi T7K250 SATA II RAID-0

 

PC Power&Cooling 510 SLI

 

*

*

 

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 240

LDT/FSB Frequency Ratio - x4.0

CPU/FSB Frequency Ratio - x11.0

PCI eXpress Frequency - 101Mhz

 

CPU VID StartUp Value - 1.425v

 

CPU VID Control - 1.425v

CPU VID Special Control - Above VID * 110%

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.50v

DRAM Voltage Control - 2.70v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200=RAM/FSB:1/01

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2

RAS# to CAS# delay (Trcd) - 03 Bus Clocks

Min RAS# active time (Tras) - 06 Bus Clocks

Row precharge time (Trp) - 03 Bus Clocks

Row Cycle time (Trc) - 07 Bus Clocks

Row refresh cyc time (Trfc) - 14 Bus Clocks

Row to Row delay (Trrd) - 03 Bus Clocks

Write recovery time (Twr) - 03 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 3120 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

DQS Skew Control - AUTO

DQS Skew Value - 0

DRAM Drive Strength - Level 6

DRAM Data Drive Strength - Level 3

Max Async Latency - 7.0 Nano Seconds

DRAM Response Time - Fast

Read Preamble Time - 5.0 Nano Seconds

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z:

 

ocver216kr.th.jpg

 

 

3dMark2003:

 

3DM03.jpg

 

 

3dMark2005:

 

3DM05.jpg

 

 

Everst Home Edition:

 

everestmemread110pl.th.jpg

 

 

==========

 

 

 

short description:

240x11 @ 2640Mhz, 1.425v + 110%

2-3-6-3 @ 2.7v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY UT nf4 SLI-DR - 7/04-2bta

 

AMD Opteron64 148 Venus CAB2E 0545

 

2x512MB Kingston HyperX PC3200 KHX3200K2/1G (BH-5)

 

XFX 7800GTX 256MB, 81.85 drivers, stock clock/mem

 

Hitachi 160GB SATA hdd (8MB cache)

 

Samsung SH-W162 DVD-DL RW

 

OCZ PowerStream OCZ520ADJSLI ATX 520W Power Supply - Retail

 

 

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 292

LDT/FSB Frequency Ratio - 3X

CPU/FSB Frequency Ratio - 10X

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - StartUp

 

CPU VID Control - 1.550v

CPU VID Special Control - Auto

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.50v

DRAM Voltage Control - 3.20v

 

DRAM Configuration Settings:

DRAM Frequency Set - 166=RAM/FSB:5/6

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2

RAS# to CAS# delay (Trcd) - 02 Bus Clocks

Min RAS# active time (Tras) - 06 Bus Clocks

Row precharge time (Trp) - 02 Bus Clocks

Row Cycle time (Trc) - 12 Bus Clocks

Row refresh cyc time (Trfc) - 24 Bus Clocks

Row to Row delay (Trrd) - 03 Bus Clocks

Write recovery time (Twr) - 03 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 3120 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Auto

DRAM Data Drive Strength - Auto

Max Async Latency - Auto

DRAM Response Time - Normal

Read Preamble Time - Auto

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 04 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest 2.01:

 

http://www.mastersofdisaster.org/OC1.JPG

 

 

3dMark2003:

 

OC2a.JPG

 

 

3dMark2005:

 

OC3a.JPG

 

 

 

 

==========

 

 

 

short description:

292x10 @ 2920Mhz, 1.550v

2-2-6-2 @ 3.2v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D - 704-2 BigToe BIOS

 

AMD Opteron 148 CABYE 0536 GPMW

 

Enermax AG701AX PSU

 

2x512MB OCZ 4800 Plat Le TCCD orange slots

 

Sapphire X800GTO2 256MB, 640/600 Omega 5.12 Drivers

 

36 gb Raptor

 

*

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 301

LDT/FSB Frequency Ratio - AUTO

CPU/FSB Frequency Ratio - 10 x

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.400v

 

CPU VID Control - 1.450v

CPU VID Special Control - Above VID * 113%

LDT Voltage Control - 1.30v

Chip Set Voltage Control - 1.50v

DRAM Voltage Control - 2.70v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200=RAM/FSB:1/1

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2.5

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 04 Bus Clocks

Row Cycle time (Trc) - 11 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 03 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 3072 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Weak 4

DRAM Data Drive Strength - Level 2

Max Async Latency - 8.0 Nano Seconds

DRAM Response Time - Fast

Read Preamble Time - 6.0 Nano Seconds

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest 2.01:

 

http://img510.imageshack.us/img510/539/11hrprime7vm.jpg

 

3dMark2003:

 

http://img510.imageshack.us/img510/3069/20037ds.jpg

 

3dMark2005:

 

http://img510.imageshack.us/img510/4008/20054gv.jpg

 

 

 

==========

 

 

 

short description:

301x10 @ 3010 Mhz, 1.450v + 113%

2.5-4-8-4 @ 2.7v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D - 7/04-2 BigToe BIOS

 

AMD Opteron 148 CABYE 0543 FPMW

 

2x1024MB OCZ EB PC4000 Platinum Edition

 

Gainward 7800GTX 256MB 81.98 xtremeG 510/1400

 

Maxtor 200GB SATA hdd (8MB cache)

 

Pioneer 109Bk

 

Plextor TA 48/24/48

 

Tagan 530W U22 2Force

 

 

 

==========

 

 

Genie BIOS Settings:

Fsb Bus Frequency - 273

LDT/Fsb Frequency Ratio - 3x

CPU/Fsb Frequency Ratio - 11x

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.450

 

CPU VID Control - 1.450

CPU VID Special Control - Above VID * 104%

LDT Voltage Control - 1.4v

Chip Set Voltage Control - 1.60v

DRAM Voltage Control - 2.70v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200=RAM/HTT 1:1

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 3

RAS# to CAS# delay (Trcd) - 03 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 02 Bus Clocks

Row Cycle time (Trc) - 08 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 03 Bus Clocks

Write recovery time (Twr) - 03 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 3210 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - weak4

DRAM Data Drive Strength - Level 2

Max Async Latency - 8.0 Nano Seconds

DRAM Response Time - Fast

Read Preamble Time - 6.0 Nano Seconds

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 04 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.31 + Everest(read) 2.50.480:

 

prime3dmarkevcpuz4er.th.jpg

 

 

3dMark2003:

 

3dmark037hy.th.jpg

 

 

3dMark2005:

 

3dmark059k4tz.th.jpg

 

 

Aquamark 3d:

 

148aqua1rr.th.jpg

 

 

==========

 

 

 

short description:

273x11 @ 3003Mhz, 1.450v + 104%

3-3-2-8 @ 2.7v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY UT nF4 SLI EXPERT - 12/07/05 BIOS[/url]

 

AMD Opteron 150 Venus CABGE 0534SPMW

 

2x1024MB OCZ pc4000 EL Gold Edition (OCZ5002048ELGE-K)

 

2*eVGA 7800GT CO 256MB, 490/1140 81.98 drivers

 

Seagate ST3250823AS SATA

 

Lite-On Combo SOHC-5235 CDRW

 

OCZ PowerStream OCZ520ADJ ATX 520W Power Supply [/url]

 

 

 

==========

 

 

 

Genie BIOS Settings:

FSB Bus Frequency - 255

LDT/FSB Frequency Ratio - 4

CPU/FSB Frequency Ratio - 11

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - Auto

 

CPU VID Control - 1.325v

CPU VID Special Control - Above VID * 104%

LDT Voltage Control - 1.30v

Chip Set Voltage Control - 1.60v

DRAM Voltage Control - 2.80v

 

DRAM Configuration Settings:

DRAM Frequency Set - By DRAM SPD Value

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 3

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 04 Bus Clocks

Row Cycle time (Trc) - 08 Bus Clocks

Row refresh cyc time (Trfc) - Auto

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - Auto

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Auto

DRAM Data Drive Strength - Auto

Max Async Latency - Auto

DRAM Response Time - Fast

Read Preamble Time - Auto

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.31 + Everest 2.20:

 

http://home.midmaine.com/~rachelm/dfiocdb2gge.jpg

 

 

3dMark2003:

 

http://home.midmaine.com/~rachelm/dfi032gge.jpg

 

 

3dMark2005:

 

http://home.midmaine.com/~rachelm/dfi052gge.jpg

 

 

 

==========

 

 

 

short description:

255x11 @ 2805Mhz, 1.325v + 104%

3-4-8-4 @ 2.8v vdimm

Share this post


Link to post
Share on other sites
Guest laydback

DFI LANPARTY nF4 Ultra-D - 704-2BTA BIOS

 

AMD Opteron146 CAB2E 0540FPMW

 

2x512MB OCZ Platinum Rev2 1.0 PC3200(TCCD)(Orange Slots)

 

BFG 7800GT OC, 500+35delta/575 XG 81.98v2

 

Maxtor 250GB ATA133

 

Western Digital 250GB SATAI

 

SBLive! 24-bit PCI

 

Enermax EG651PVE-FM 24p / 12v=36a 5v=36a 3.3v=36a

 

Zalman Reserator Plus!

 

Dual Swiftech MCP-350 Pumps

 

Thermaltake Aquabay M2 Radiator

 

Koolance CPU-300-H06 Waterblock

 

19" Viewsonic LCD - VA912b

 

17' Compaq 7020 LCD

 

 

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 305

LDT/FSB Frequency Ratio - 3x

CPU/FSB Frequency Ratio - 10x

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.500v

 

CPU VID Control - 1.500v

CPU VID Special Control - Above VID * Auto

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.50v

DRAM Voltage Control - 2.80v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200=RAM/FSB:01/01

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2.5

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 07 Bus Clocks

Row precharge time (Trp) - 03 Bus Clocks

Row Cycle time (Trc) - 07 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 01 Bus Clocks

Read to Write delay (Trwt) - 02 Bus Clocks

Refresh Period (Tref) - 3684 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Auto

DRAM Data Drive Strength - Auto

Max Async Latency - 9.0 Nano Seconds

DRAM Response Time - Fast

Read Preamble Time - 6.5 Nano Seconds

IdleCycle Limit - 16 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.31 + Everest:

 

prime2zj.th.jpg

 

3dMark2003:

 

3dmark033bd.th.jpg

 

 

3dMark2005:

 

3dmark050zn.th.jpg

 

 

Aquamark 3d:

 

am39he.th.jpg

 

==========

 

 

 

short description:

305x10 @ 3050Mhz, 1.50v + Auto

DDR610 - 2.5-4-3-7 @ 2.8v vdimm

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...