Jump to content

Socket 939 Overclocking Database


Recommended Posts

DFI LANPARTY nF4 Ultra-D (6/04- BIOS)

 

AMD XP4000+ San Deigo

 

2x512MB OCZ PC4800 Platnum (OCZ600512EEPE)

 

XFX GeForce 7900GT, 552/1608 83.91 drivers

 

2X 74GB Western Digital Raptor2's 10,000RPM SATA hdd's Raid-0

 

Asus 16x DVD Ram burner

 

OCZ 700GX

 

 

 

*

*

 

 

 

*

*

 

==========

 

[b]Genie BIOS Settings:[/b]
[color=red]
FSB Bus Frequency.............................  -  305
LDT/FSB Frequency Ratio.......................  -  3x
CPU/FSB Frequency Ratio.......................  -  10x
PCI eXpress Frequency.........................  -  105Mhz

CPU VID StartUp Value.........................  -  1.400v

CPU VID Control...............................  -  1.175
CPU VID Special Control.......................  -  123%
LDT Voltage Control...........................  -  1.30v 
Chip Set Voltage Control......................  -  1.60v
DRAM Voltage Control..........................  -  2.70v[/color]

[b]DRAM Configuration Settings:[/b]
[color=red]
DRAM Frequency Set............................  -  200=RAM/FSB:01/01
Command Per Clock (CPC).......................  -  Enable 
CAS Latency Control (Tcl).....................  -  2.5
RAS# to CAS# delay (Trcd).....................  -  4
Min RAS# active time (Tras)...................  -  8
Row precharge time (Trp)......................  -  3
Row Cycle time (Trc)..........................  -  7 Bus Clocks
Row refresh cyc time (Trfc)...................  -  15 Bus Clocks
Row to Row delay (Trrd).......................  -  02 Bus Clocks
Write recovery time (Twr).....................  -  02 Bus Clocks
Write to Read delay (Twtr)....................  -  02 Bus Clocks
Read to Write delay (Trwt)....................  -  03 Bus Clocks
Refresh Period (Tref).........................  -  3072 Cycles
DRAM Bank Interleave..........................  -  Enabled

DQS Skew Control..............................  -  Auto
DQS Skew Value................................  -  0
DRAM Drive Strength...........................  -  7weak
DRAM Data Drive Strength......................  -  level 1(reduced 50%)
Max Async Latency.............................  -  8ns
DRAM Response Time............................  -  Fast
Read Preamble Time............................  -  5ns
IdleCycle Limit...............................  -  256 Cycles
Dynamic Counter...............................  -  Disable
R/W Queue Bypass..............................  -  16 x
Bypass Max....................................  -  07 x
32 Byte Granularity...........................  -  Disable(4 Bursts)
[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z:

 

toasterkn8.th.jpg

 

3dMark2003:

 

03tg8.th.jpg

 

3dMark2005:

 

05ih2.th.jpg

 

3dMark 2006:

 

06ne9.th.jpg

AquaMark3:

 

aqm3zm2.th.jpg

==========

 

 

 

short description:

305x10 @ 3050Mhz, 1.44525Vid (Est)

2.5-4-8-3 @ 2.70v vdimm[/b

Share this post


Link to post
Share on other sites

  • Replies 466
  • Created
  • Last Reply

Top Posters In This Topic

DFI LANPARTY nF4 Ultra-D (2006/04/06 BIOS)

 

AMD X2 3800+ Toledo ADA3800DAA5CD LDBFE 0637BPMW

 

2x512MB Corsair 3500LL PRO (TWINX1024-3500LL PRO)

 

Connect3D X850XP TE, 580/1256 Catalyst 7.3 drivers

 

320GB Seagate 7200RPM SATA HD

 

 

==========

 

[b]Genie BIOS Settings:[/b]
[color=red]
FSB Bus Frequency.............................  -  297
LDT/FSB Frequency Ratio.......................  -  3x
CPU/FSB Frequency Ratio.......................  -  10x
PCI eXpress Frequency.........................  -  100Mhz

CPU VID StartUp Value.........................  -  1.500v

CPU VID Control...............................  -  Auto
CPU VID Special Control.......................  -  Above VID * 110%
LDT Voltage Control...........................  -  1.20v 
Chip Set Voltage Control......................  -  1.50v
DRAM Voltage Control..........................  -  2.60v[/color]

[b]DRAM Configuration Settings:[/b]
[color=red]
DRAM Frequency Set............................  -  180=RAM/FSB:9/10
Command Per Clock (CPC).......................  -  Enable 
CAS Latency Control (Tcl).....................  -  3.0
RAS# to CAS# delay (Trcd).....................  -  3
Min RAS# active time (Tras)...................  -  6
Row precharge time (Trp)......................  -  2
Row Cycle time (Trc)..........................  -  10 Bus Clocks
Row refresh cyc time (Trfc)...................  -  24 Bus Clocks
Row to Row delay (Trrd).......................  -  03 Bus Clocks
Write recovery time (Twr).....................  -  03 Bus Clocks
Write to Read delay (Twtr)....................  -  02 Bus Clocks
Read to Write delay (Trwt)....................  -  03 Bus Clocks
Refresh Period (Tref).........................  -  3120 Cycles
DRAM Bank Interleave..........................  -  Enabled

DQS Skew Control..............................  -  Auto
DQS Skew Value................................  -  0
DRAM Drive Strength...........................  -  Auto
DRAM Data Drive Strength......................  -  Auto
Max Async Latency.............................  -  Auto
DRAM Response Time............................  -  Normal
Read Preamble Time............................  -  Auto
IdleCycle Limit...............................  -  256 Cycles
Dynamic Counter...............................  -  Disable
R/W Queue Bypass..............................  -  16 x
Bypass Max....................................  -  07 x
32 Byte Granularity...........................  -  Disable(4 Bursts)
[/color]

 

 

==========

 

 

 

CPU-Z Everest 3dmark2001SE Orthos

 

2940mhzscreen1vi0.th.jpg

 

3dMark2003:

 

2940mhzscreen2jv8.th.jpg

 

3dMark2005:

 

2940mhzscreen3py2.jpg

 

 

3dMark 2006:

 

2950mhzscreen4pp8.jpg

 

 

 

==========

 

 

short description:

294x10 @ 2940Mhz, 1.44v (autox110%)

3-3-2-6 @ 2.60v vdimm 267mhz

Share this post


Link to post
Share on other sites

DFI LanParty UT RDX200 CF-DR

 

AMD Opteron 165 CCBBE 0616

 

 

2x 1gb A-DATA PC3200

 

Saphire x1900gt@ 546core and 729mem

 

2x Western Digital satas raid-0

 

psu Hiper 580watt

 

cooler cool master gemin II

 

 

 

==========

 


[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  334

HT PLL High Speed.............................  -  enable

LDT/FSB Frequency Ratio.......................  -  3x

CPU/FSB Frequency Ratio.......................  -  Auto



CPU VID StartUp Value.........................  -  auto



NB-SB Port Configuration......................  -  Enhanced



CPU VID Control...............................  -  1.50

CPU VID Special Control.......................  -  Auto

DRAM Voltage Control..........................  -  2.99v

SB PCIE Voltage...............................  -  1.9v

NB Analog Voltage.............................  -  1.2v

LDT Bus Voltage...............................  -  1.5v 

NB Core Voltage...............................  -  1.2v

[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  120=RAM/FSB:03/05

Command Per Clock (CPC).......................  -  enable

CAS Latency Control (Tcl).....................  -  3.0 Bus Clocks

RAS# to CAS# delay (Trcd).....................  -  04 Bus Clocks

Min RAS# active time (Tras)...................  -  04 Bus Clocks

Row precharge time (Trp)......................  -  04 Bus Clocks

Row Cycle time (Trc)..........................  -  07 Bus Clocks

Row refresh cyc time (Trfc)...................  -  14 Bus Clocks

Row to Row delay (Trrd).......................  -  03 Bus Clocks

Write recovery time (Twr).....................  -  03 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  08 Bus Clocks

Refresh Period (Tref).........................  -  4672 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  level 9

DRAM Data Drive Strength......................  -  level 1 (reduce 505)

Max Async Latency.............................  -  12.0 ns

Read Preamble Time............................  -  9.0 ns

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  7 x

32 Byte Granularity...........................  -  Disable (8 Bursts)

[/color]

 

 

==========

 

 

http://img219.imageshack.us/img219/4305/oc1zf0.jpg

 

 

http://img514.imageshack.us/img514/1033/oc2ym2.jpg

 

 

http://img177.imageshack.us/img177/378/oc3jw5.jpg

 

 

http://img244.imageshack.us/img244/4950/oc4hk7.jpg

 

 

 

 

 

==========

 

 

 

short description:

334x9 @ 3006ghz, 1.520v

3.0-4-4-4 @ 2.99v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D (04/06/06 BIOS)

 

AMD OPTY 175 (CCBWE 0551VPMW)

 

2x512MB G-Skill PC4800 ( PN – 1GBFF-DDR600-1T )

 

X1900 XT-X@689/797, CAT 7.5 DRIVERS

 

2X36GB Western Digital Raptor RAID 0

 

LITEON 832S DVD R/W

 

PCP&C 1KW PSU

 

Mach2 GT/Chilly1 head/Desuperheater

 

 


[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  289

LDT/FSB Frequency Ratio.......................  -  4

CPU/FSB Frequency Ratio.......................  -  11

PCI eXpress Frequency.........................  -  105MHZ



CPU VID StartUp Value.........................  -  STARTUP



CPU VID Control...............................  -  1.35v

CPU VID Special Control.......................  -  123%

LDT Voltage Control...........................  -  1.2v

Chip Set Voltage Control......................  -  1.6v

DRAM Voltage Control..........................  -  2.6v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  200=RAM/FSB:01/01

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  2.5

RAS# to CAS# delay (Trcd).....................  -  4

Min RAS# active time (Tras)...................  -  6

Row precharge time (Trp)......................  -  3

Row Cycle time (Trc)..........................  -  7 Bus Clocks

Row refresh cyc time (Trfc)...................  -  13 Bus Clocks

Row to Row delay (Trrd).......................  -  0 Bus Clocks

Write recovery time (Twr).....................  -  02 Bus Clocks

Write to Read delay (Twtr)....................  -  01 Bus Clocks

Read to Write delay (Trwt)....................  -  02 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  6

DRAM Data Drive Strength......................  -  4

Max Async Latency.............................  -  8

DRAM Response Time............................  -  fastest

Read Preamble Time............................  -  5

IdleCycle Limit...............................  -  16 Cycles

Dynamic Counter...............................  -  Enabled

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE:

 

thumb_3d01-orthos-cpuz.JPG

 

 

 

 

3dMark2003:

 

thumb_3d03.JPG

 

 

 

 

3dMark2005:

 

thumb_3d05.JPG

 

 

 

 

 

3dMark 2006:

 

thumb_3d06.JPG

 

 

 

 

 

==========

 

 

 

short description:

289x11 @ 3179Mhz, Mach2 GT cooling

Share this post


Link to post
Share on other sites

Guest navinjohnson

DFI LanpartyUT nF4 Ultra-D (BIOS 2006/04/06)

 

AMD Opteron 170 socket939 w/ Thermalright Ultra-90 (2750Mhz, 275x10)

 

2x1GB OCZ EL Platinum PC3200 XTC (OCZP4002GK)

 

Evga GeForce 6600GT 128MB 128-bit PCI-E, 94.24 drivers, 400/1002

 

Seagate 160GB 7200RPM SATA hdd

 

Pioneer 52x/16x DVD/CD-ROM

 

PC Power & Cooling Turbo-Cool 470w Power Supply

 

Thermaltake Soprano Case

 

 

 

==========

 

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  280

LDT/FSB Frequency Ratio.......................  -  X3

CPU/FSB Frequency Ratio.......................  -  X10

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  StartUp



CPU VID Control...............................  -  1.475

CPU VID Special Control.......................  -  Auto

LDT Voltage Control...........................  -  1.20v 

Chip Set Voltage Control......................  -  1.50v

DRAM Voltage Control..........................  -  2.70v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  140=RAM/FSB:07/10

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  2

RAS# to CAS# delay (Trcd).....................  -  3

Min RAS# active time (Tras)...................  -  7

Row precharge time (Trp)......................  -  2

Row Cycle time (Trc)..........................  -  10 Bus Clocks

Row refresh cyc time (Trfc)...................  -  14 Bus Clocks

Row to Row delay (Trrd).......................  -  03 Bus Clocks

Write recovery time (Twr).....................  -  02 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  8

DRAM Data Drive Strength......................  -  1

Max Async Latency.............................  -  7.0ns

DRAM Response Time............................  -  Fast

Read Preamble Time............................  -  Auto

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  04 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Orthos + 3dMark2001SE + 2x CPUZ + SmartGuardian:

 

http://i47.photobucket.com/albums/f161/Lib...Orthoscrop2.jpg

 

3dMark2003:

 

3d032.jpg

 

3dMark2005:

 

3d052.jpg

 

3dMark2006:

 

3d062.jpg

 

Aquamark3.0

 

Aqua2.jpg

 

 

==========

 

 

 

short description:

280x10=2800mhz 1.475vcore 2.7vdimm

2-3-2-7

Share this post


Link to post
Share on other sites

  • 2 weeks later...

DFI LANPARTY UT nF4 SLI-DR Expert (04/06/2006 BIOS)

 

AMD X2 3800+ (LCBIE Toledo core)

 

2x1024MB OCZ PC4000 (OCZ5001024ELGEGXT)

 

eVGA GeForce 7800GTX 256MB, 516/1330 94.24 drivers

 

2x Seagate Barracuda 7200.10 320GB SATAII (ST332060AS), 1x Western Digital 500GB 7200rpm SATAII (WDC WD5000AAKS-00TMA0), 1x Samsung Spinpoint 7200rpm SATAII (SP2004C)

 

Plextor PX-716A DVDR

 

Enermax 535w power supply (EG565P-VE)

 

 

 

*

*

 

th_ram_bios1.jpg th_genie_bios.jpg th_ram_bios2.jpg

*

*

 

==========

 


[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  315

LDT/FSB Frequency Ratio.......................  -  x3

CPU/FSB Frequency Ratio.......................  -  x9

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  1.525v



CPU VID Control...............................  -  1.525v

CPU VID Special Control.......................  -  *107.2%

LDT Voltage Control...........................  -  1.30v 

Chip Set Voltage Control......................  -  1.52v

DRAM Voltage Control..........................  -  2.77v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  166=RAM/FSB:05/06

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  3

RAS# to CAS# delay (Trcd).....................  -  4

Min RAS# active time (Tras)...................  -  8

Row precharge time (Trp)......................  -  3

Row Cycle time (Trc)..........................  -  11 Bus Clocks

Row refresh cyc time (Trfc)...................  -  16 Bus Clocks

Row to Row delay (Trrd).......................  -  03 Bus Clocks

Write recovery time (Twr).....................  -  03 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  Auto

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Level 07

DRAM Data Drive Strength......................  -  Level 1(Reduce 50%)

Max Async Latency.............................  -  8.0ns

DRAM Response Time............................  -  Normal

Read Preamble Time............................  -  06.0 ns

IdleCycle Limit...............................  -  128 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  04 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Orthos + 3dMark2001SE + CPU-Z (x2) + ITE Smartguardian:

 

th_ocdb_2835mhz.png

 

 

3dMark2003:

 

3dmark03.png

 

 

3dMark2005:

 

3dmark05.png

 

 

 

3dMark 2006:

 

3dmark06.png

 

 

Aquamark3:

 

aquamark.jpg

 

 

==========

 

 

short description:

315x9 @ 2835Mhz, 1.6v

3-4-3-8 @ 258Mhz, 2.72v

115+ hours Orthos stable

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D (04/06/06 BIOS)

 

AMD OPTY 175 (CCBWE 0551VPMW)

 

2x512MB G-Skill PC4800 + 2x512mb OCZ 4800 Platinum

 

X1900 XT-X@689/797, CAT 6.6 DRIVERS

 

2X36GB Western Digital Raptor RAID 0

 

LITEON 832S DVD R/W

 

PCP&C 1KW PSU

 

Mach2 GT/Chilly1 head/Desuperheater

 

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  289

LDT/FSB Frequency Ratio.......................  -  4

CPU/FSB Frequency Ratio.......................  -  11

PCI eXpress Frequency.........................  -  105MHZ



CPU VID StartUp Value.........................  -  STARTUP



CPU VID Control...............................  -  1.35v

CPU VID Special Control.......................  -  123%

LDT Voltage Control...........................  -  1.3v

Chip Set Voltage Control......................  -  1.6v

DRAM Voltage Control..........................  -  2.8v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  166=RAM/FSB

Command Per Clock (CPC).......................  -  Disabled

CAS Latency Control (Tcl).....................  -  2.5

RAS# to CAS# delay (Trcd).....................  -  3

Min RAS# active time (Tras)...................  -  5

Row precharge time (Trp)......................  -  3

Row Cycle time (Trc)..........................  -  7 Bus Clocks

Row refresh cyc time (Trfc)...................  -  14 Bus Clocks

Row to Row delay (Trrd).......................  -  02 Bus Clocks

Write recovery time (Twr).....................  -  02 Bus Clocks

Write to Read delay (Twtr)....................  -  01 Bus Clocks

Read to Write delay (Trwt)....................  -  02 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  7

DRAM Data Drive Strength......................  -  4

Max Async Latency.............................  -  8

DRAM Response Time............................  -  fast

Read Preamble Time............................  -  5

IdleCycle Limit...............................  -  16 Cycles

Dynamic Counter...............................  -  Enabled

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE:

 

fe43cz_th.jpg

 

 

 

 

3dMark2003:

 

iw0vuq_th.jpg

 

 

 

 

3dMark2005:

 

21l0ua9_th.jpg

 

 

 

 

 

3dMark 2006:

 

241t5bp_th.jpg

 

 

 

 

 

==========

 

 

 

short description:

289x11 @ 3179Mhz, Mach2 GT cooling

Edited by kitfit1

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 SLI-D (704-2BT BIOS)

 

AMD A64 3700+ San Diego KACAE 0546EPAW

 

2x1024MB G.Skill HX PC3200(DDR400) (F1-3200BIU2-2GBHX)

 

Dell GeForce 6800, 400/1300 Forceware 92.91 drivers

 

250GB Seagate Baracuda 7200.8 7,200RPM SATA NCQ 8MB Cache hdd (ST3250823AS)

 

NEC ND4550A DVD-RAM SuperMulti Drive 2MB Cache

 

Tagan TG530-U15 530w ATX v2.01 Modular Power Supply

 

==========

 


[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  311

LDT/FSB Frequency Ratio.......................  -  3x

CPU/FSB Frequency Ratio.......................  -  9x

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  1.500v



CPU VID Control...............................  -  1.325v

CPU VID Special Control.......................  -  113%

LDT Voltage Control...........................  -  1.20v 

Chip Set Voltage Control......................  -  1.50v

DRAM Voltage Control..........................  -  2.70v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  150

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  3

RAS# to CAS# delay (Trcd).....................  -  3

Min RAS# active time (Tras)...................  -  0

Row precharge time (Trp)......................  -  2

Row Cycle time (Trc)..........................  -  7 Bus Clocks

Row refresh cyc time (Trfc)...................  -  13 Bus Clocks

Row to Row delay (Trrd).......................  -  02 Bus Clocks

Write recovery time (Twr).....................  -  02 Bus Clocks

Write to Read delay (Twtr)....................  -  01 Bus Clocks

Read to Write delay (Trwt)....................  -  02 Bus Clocks

Refresh Period (Tref).........................  -  1032 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Weak 4

DRAM Data Drive Strength......................  -  Level 3

Max Async Latency.............................  -  7.0 ns

DRAM Response Time............................  -  Normal

Read Preamble Time............................  -  5.0 ns

IdleCycle Limit...............................  -  16 Cycles

Dynamic Counter...............................  -  Enabled

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

==========

 

SP2004 + 3DMark 2001SE + CPUZ

 

3dmark01sp2004ob8.th.jpg

 

3DMark 03

 

3dmark03lk2.th.jpg

 

3DMark 05

 

3dmark05zz2.th.jpg

 

3DMark 06

3dmark06tc9.th.jpg

 

Aquamark 3

aquamarknv5.th.jpg

 

==========

 

short description:

311 x 9 = 2799MHz, 1.46v

3-3-0-2 @ 2.70 vdimm

Share this post


Link to post
Share on other sites

  • 2 weeks later...

DFI LANPARTY UT NF4 Ultra-D (04/06 BIOS)

 

AMD 165 Opteron dual core CCBBE 0617FPMW w/Big Typhoon

 

2x1024MB G.SKILL F1-4000USU2-2GBHZ PC4000 (Samsung K4H510838C-UCCC)

 

EVGA 7900gs 256, 500/690 94.24 drivers

 

WD2500KS 250GB 7200 RPM SATA 3.0Gb/s RAID0 and 500GB Seagate Barracuda 7200.10 16mb 3GB SATA

 

LITE-ON 16X DVD±R DVD Burner 12X DVD-RAM SATA

 

OCZ 700 Game Xtreme

 

 

==========

 

[b]Genie BIOS Settings:[/b]
[color=red]
FSB Bus Frequency.............................  -  308
LDT/FSB Frequency Ratio.......................  -  3
CPU/FSB Frequency Ratio.......................  -  9
PCI eXpress Frequency.........................  -  100Mhz

CPU VID StartUp Value.........................  -  1.400v

CPU VID Control...............................  -  Auto
CPU VID Special Control.......................  -  Auto
LDT Voltage Control...........................  -  1.20v 
Chip Set Voltage Control......................  -  1.50v
DRAM Voltage Control..........................  -  2.60v[/color]

[b]DRAM Configuration Settings:[/b]
[color=red]
DRAM Frequency Set............................  -  166=RAM/FSB:05/06
Command Per Clock (CPC).......................  -  Enable 
CAS Latency Control (Tcl).....................  -  3
RAS# to CAS# delay (Trcd).....................  -  4
Min RAS# active time (Tras)...................  -  8
Row precharge time (Trp)......................  -  4
Row Cycle time (Trc)..........................  -  9 Bus Clocks
Row refresh cyc time (Trfc)...................  -  16 Bus Clocks
Row to Row delay (Trrd).......................  -  02 Bus Clocks
Write recovery time (Twr).....................  -  03 Bus Clocks
Write to Read delay (Twtr)....................  -  02 Bus Clocks
Read to Write delay (Trwt)....................  -  03 Bus Clocks
Refresh Period (Tref).........................  -  3684 Cycles
DRAM Bank Interleave..........................  -  Enabled

DQS Skew Control..............................  -  Auto
DQS Skew Value................................  -  0
DRAM Drive Strength...........................  -  Auto
DRAM Data Drive Strength......................  -  Auto
Max Async Latency.............................  -  8
DRAM Response Time............................  -  Normal
Read Preamble Time............................  -  5.5
IdleCycle Limit...............................  -  256 Cycles
Dynamic Counter...............................  -  Disable
R/W Queue Bypass..............................  -  16 x
Bypass Max....................................  -  07 x
32 Byte Granularity...........................  -  Disable(4 Bursts)
[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z + Everest 2.20:

 

mainscreennz4.th.png

 

 

3dMark2003:

 

3dmark03ba6.th.png

 

 

3dMark2005:

 

3dmark05zr3.th.png

 

 

 

3dMark 2006:

 

3dmark06li4.th.png

 

 

 

==========

 

 

 

short description:

308x9 @ 2772Mhz, 1.40v cpu voltages

3-4-8-4 @ 2.60v vdimm

Share this post


Link to post
Share on other sites

  • 4 weeks later...

DFI LanParty UT NF4 Ultra-D

 

AMD Athlon 64 X2 socket939 3800+ (2700Mhz, 270x10)

 

4x512MB Corsair 2Gb XMS3200 Xtreme Pro C2 Series (TWINX1024-3200C2PRO)

 

ATI Radeon X800XL 256Mb PCI-E x16 ATI Display Drivers

 

Western Digital Cavier SE16 SATAII-300 7200RPM 16Mb 250 GB

 

Sony 16X DVD-ROM

 

Corsair HX-620 (620w) Power Supply

 

 

 

 

 

==========

 

 


[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  270

LDT/FSB Frequency Ratio.......................  -  x4

CPU/FSB Frequency Ratio.......................  -  x10

PCI eXpress Frequency.........................  -  105MHZ



CPU VID StartUp Value.........................  -  STARTUP



CPU VID Control...............................  -  1.55v

CPU VID Special Control.......................  -  100%

LDT Voltage Control...........................  -  1.2v

Chip Set Voltage Control......................  -  1.5v

DRAM Voltage Control..........................  -  2.8v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  140=RAM/FSB

Command Per Clock (CPC).......................  -  Enabled

CAS Latency Control (Tcl).....................  -  3

RAS# to CAS# delay (Trcd).....................  -  3

Min RAS# active time (Tras)...................  -  3

Row precharge time (Trp)......................  -  7

Row Cycle time (Trc)..........................  -  13 Bus Clocks

Row refresh cyc time (Trfc)...................  -  16 Bus Clocks

Row to Row delay (Trrd).......................  -  03 Bus Clocks

Write recovery time (Twr).....................  -  03 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Weak4

DRAM Data Drive Strength......................  -  Level1

Max Async Latency.............................  -  8

DRAM Response Time............................  -  fast

Read Preamble Time............................  -  5.5

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Enabled

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(8 Bursts)

[/color]

 

 

 

==========

 

Orthos + 3dMark2001SE + 2x CPU-Z:

 

ocdbentry3dmark01orthosak8.th.png

 

 

3dMark2003:

 

3dmark03nx5.th.png

 

 

3dMark2005:

 

3dmark05lx5.th.png

 

 

3dMark2006:

 

3dmark06he9.th.png

 

 

==========

 

 

 

short description:

270x10 @ 2700mhz - 1.55vcore (1.55v*100%)

3.0-3-3-7 @ 2.8vdimm

Share this post


Link to post
Share on other sites

  • 1 month later...
Guest LookBackX2

DFI LANPARTY CFX3200-DR (5/23/2006 Beta)

 

AMD Opteron 170UP

 

2x1024MB TeamGroup Xtreem Cronus DDR500

 

EVGA 8800 GTS 320 Superclocked

 

3Ware 8506-4L PCI-X/PCI HD Controller, 3x Seagate Barracuda 320GB Raid 5

 

Samsung Writemaster DVD Burner w/Lightscribe

 

CM Stacker 810 w/homebrew watercooling

 

*

*

==========

[B]Genie BIOS Settings:[/B]
[COLOR=red]
FSB Bus Frequency.............................  -  301
LDT/FSB Frequency Ratio.......................  -  3
CPU/FSB Frequency Ratio.......................  -  10
RD580 HT PLL Speed............................  -  auto
HT Bus MMOS Drive Strength....................  -  31
HT Bus PMOS Drive Strength....................  -  31
HT Bus Receiever Impedance....................  -  31
CPU HT Bus Drive Strength.....................  -  strong
CPU VID Control...............................  -  1.525v
CPU VID Special Control.......................  -  Above VID * 102.3%
DRAM Voltage Control..........................  -  2.65v
SB PCIE Voltage...............................  -  1.85v
NB Analog Voltage.............................  -  1.34v
LDT Bus Voltage...............................  -  1.34v 
NB Core Voltage...............................  -  1.34v
[/COLOR]

[B]DRAM Configuration Settings:[/B]
[COLOR=red]
DRAM Frequency Set............................  -  166
Command Per Clock (CPC).......................  -  Enabled
CAS Latency Control (Tcl).....................  -  3
RAS# to CAS# delay (Trcd).....................  -  3
Min RAS# active time (Tras)...................  -  0
Row precharge time (Trp)......................  -  3
Row Cycle time (Trc)..........................  -  7
Row refresh cyc time (Trfc)...................  -  14
Row to Row delay (Trrd).......................  -  2
Write recovery time (Twr).....................  -  2
Write to Read delay (Twtr)....................  -  2
Read to Write delay (Trwt)....................  -  3
Refresh Period (Tref).........................  -  3120
DRAM Bank Interleave..........................  -  Enabled
Errata 94 Enhancement.........................  -  Disable
Errata 123 Enhancement........................  -  auto
Odd Divisor Correct...........................  -  Disable

DQS Skew Control..............................  -  Increase
DQS Skew Value................................  -  155
DRAM Drive Strength...........................  -  9
DRAM Data Drive Strength......................  -  Level 1 (Reduce 50%)
DIMM 1/3 Clock Timing Skew....................  -  auto
DIMM 2/4 Clock Timing Skew....................  -  Delay  300ps
Max Async Latency.............................  -  8
Read Preamble Time............................  -  6
IdleCycle Limit...............................  -  16 Cycles
Dynamic Counter...............................  -  Disable
R/W Queue Bypass..............................  -  16 x
Bypass Max....................................  -  7 x
Burst Length..................................  -  4 Bursts
[/COLOR]

 

==========

 

Prime95 + 3dMark2001SE + CPU-Z 1.35 + Everest 2.20:

thumb_3010_3dm01___Orthos_9hrs.jpg

 

3dMark2003:

 

thumb_3010_3dm03.jpg

 

 

3dMark2005:

 

thumb_3010_3dm05.jpg

 

 

3dMark2006:

 

 

thumb_3010_3dm06.jpg

 

Aquamark 3d:

 

thumb_3010_AquaMark.jpg

 

Everest Home Edition 2.20:

 

 

thumb_3010_250Mem_Everest_Read.jpg

==========

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra D (7/04-2BTA BIOS)

 

Opteron 175 CCBBE 0617

 

2x1024MB OCZ PC4000 EB (OCZ5001024EBPE)

 

EVGA 880GTS 640MB, 675/1024 163.44 drivers

 

3 X Barracuda SATA 7200.10 250GB RAID 0

 

Benq DW 1655 DVD

 

OCZ GameXstream 600W

 

 

 

*

*

*

*

 

==========

 


[Genie BIOS Settings:]



FSB Bus Frequency.............................  -  282

LDT/FSB Frequency Ratio.......................  -  3X

CPU/FSB Frequency Ratio.......................  -  11X

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  Auto



CPU VID Control...............................  -  1.475

CPU VID Special Control.......................  -  Auto

LDT Voltage Control...........................  -  1.30v 

Chip Set Voltage Control......................  -  1.60v

DRAM Voltage Control..........................  -  2.6v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  180

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  3

RAS# to CAS# delay (Trcd).....................  -  3

Min RAS# active time (Tras)...................  -  8

Row precharge time (Trp)......................  -  2

Row Cycle time (Trc)..........................  -  10 Bus Clocks

Row refresh cyc time (Trfc)...................  -  16 Bus Clocks

Row to Row delay (Trrd).......................  -  03 Bus Clocks

Write recovery time (Twr).....................  -  02 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3072 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Normal 4

DRAM Data Drive Strength......................  -  2

Max Async Latency.............................  -  8ns

DRAM Response Time............................  -  Normal

Read Preamble Time............................  -  6ns

IdleCycle Limit...............................  -  32 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z + Everest 2.20:

 

ocdb1oa1.th.jpg

 

 

3dMark2003:

 

ocdb23d03yh1.th.jpg

 

3dMark2005:

 

ocdb3d05ps6.th.jpg

 

(For some reason, the score isn't showing up on the screen. I had to upload to ORB to see the score)

 

3dMark 2006:

 

ocdb3d06or6.th.jpg

 

 

 

==========

 

 

 

short description:

282 X 11 @ 3102Mhz, 1.475 cpu voltages

3-3-8-2 @ 2.60v vdimm

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

×
×
  • Create New...