Jump to content


Photo
* * * * * 1 votes

Socket 939 Overclocking Database


  • Please log in to reply
466 replies to this topic

#25 Angry_Games

Angry_Games

    Honorary Member

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 27999 posts

Posted 27 July 2005 - 05:17 PM

DFI LANPARTY nF4 SLI-DR NF44 SLI-DR - 6/23-2 BIOS (Oskar Wu Alpha BIOS)

AMD Sempron 3200+ socket 939 cpu

2x256MB Buffalo Technologies PC3700 BH-5

Sapphire Radeon X300SE 128MB PCI-E, ATI catalyst 5.6 Drivers

Hitachi 80GB SATA II hdd (8MB cache)

ASUS CD-S520/A5 Black IDE CD-ROM Drive

OCZ PowerStream OCZ600ADJ ATX 600W Power Supply - Retail

Thermalright SLK-948U bolt-thru heatsink + Enermax 92mm adjustable fan

*
*
Posted Image

Posted Image

Posted Image

Posted Image

*
*

==========


Genie BIOS Settings:

FSB Bus Frequency - 285
LDT/FSB Frequency Ration - X 3.0
CPU/FSB Frequency Ratio - Auto
PCI eXpress Frequency - 100Mhz

CPU VID StartUp Value - 1.500v

CPU VID Control - 1.275v
CPU VID Special Control - Above VID * 126%
LDT Voltage Control - 1.20v
Chip Set Voltage Control - 1.50v
DRAM Voltage Control - 3.20v


DRAM Configuration Settings:

DRAM Frequency Set - 166 (DRAM/FSB:5/06)
Command Per Clock (CPC) - Enable
CAS Latency Control (Tcl) - 2.0
RAS# to CAS# delay (Trcd) - 02 Bus Clocks
Min RAS# active time (Tras) - 05 Bus Clocks
Row precharge time (Trp) - 02 Bus Clocks
Row Cycle time (Trc) - 07 Bus Clocks
Row refresh cyc time (Trfc) - 17 Bus Clocks
Row to Row delay (Trrd) - 02 Bus Clocks
Write recovery time (Twr) - 02 Bus Clocks
Write to Read delay (Twtr) - 01 Bus Clocks
Read to Write delay (Trwt) - 02 Bus Clocks
Refresh Period (Tref) - Auto
Write CAS Latency (Twcl) - Auto
DRAM Bank Interleave - Enabled



DQS Skew Control - Auto
DQS Skew Value - 0
DRAM Drive Strength - Auto
DRAM Data Drive Strength - Auto
Max Async Latency - Auto
DRAM Response Time - Fastest
Read Preamble Time - Auto
IdleCycle Limit - 256 Cycles
Dynamic Counter - Disable
R/W Queue Bypass - 16 x
Bypass Max - 07 x
32 Byte Granularity - Disable(4 Bursts)



==========


Prime95 + 3dMark2001SE + CPU-Z 1.28 + Everest 1.51:

http://www.angrygame...ron_285x9-1.jpg


3dMark2003:

Posted Image


3dMark2005:

Posted Image


Aquamark 3d:

Posted Image




==========



short description:
285x9 @ 2566Mhz, 1.275v + 126%
2-2-5-2 @ 3.2v vdimm
Diablo III arrives at Angry's house:
Posted Image

#26 malinois1

malinois1

    Member

  • Members
  • PipPip
  • 485 posts

Posted 29 July 2005 - 03:19 PM

DFI LANPARTY nF4 SLI-D 6/23/2005-3 BIOS

AMD Athlon 64 X2 4400+ Toledo 1GHz FSB 2 x 1MB L2 Cache Socket 939 Dual Core Processor - Retail
- CCBWE 0518 MPMW stepping


2x512MB OCZ EL Platinum Revision 2

eVGA 256-P2-N376-AX Geforce 6800GT 256MB 256-bit GDDR3 PCI-Express x16 Video Card , 7.7.7.6 drivers - 409/1100

2x HITACHI Deskstar 7K80 HDS728080PLA380 -0A30356 80GB 7200 RPM 8MB Cache Serial ATA II Hard Drive (RAID-0)

PCP&Cooling Turbo-Cool 510 Express / SLI

THERMALRIGHT XP-90 Heatsink - Retail

*
*


*
*

==========


Genie BIOS Settings:

FSB Bus Frequency - 237
LDT/FSB Frequency Ration - 3
CPU/FSB Frequency Ratio - 16 16
PCI eXpress Frequency - 100Mhz

CPU VID StartUp Value - StartUp

CPU VID Control - 1.300v
CPU VID Special Control - Avove VID * 113%
LDT Voltage Control - 1.30v
Chip Set Voltage Control - 1.60v
DRAM Voltage Control - 2.8v


DRAM Configuration Settings:

DRAM Frequency Set - 200 (DRAM/FSB:1/01)
Command Per Clock (CPC) - Enable
CAS Latency Control (Tcl) - 2.0
RAS# to CAS# delay (Trcd) - 03 Bus Clocks
Min RAS# active time (Tras) - 08 Bus Clocks
Row precharge time (Trp) - 03 Bus Clocks
Row Cycle time (Trc) - 08 Bus Clocks
Row refresh cyc time (Trfc) - 16 Bus Clocks
Row to Row delay (Trrd) - 03 Bus Clocks
Write recovery time (Twr) - 03 Bus Clocks
Write to Read delay (Twtr) - 02 Bus Clocks
Read to Write delay (Trwt) - 03 Bus Clocks
Refresh Period (Tref) - 3120 Cycles
Write CAS Latency (Twcl) - Auto
DRAM Bank Interleave - Enabled



DQS Skew Control - Auto
DQS Skew Value - 0
DRAM Drive Strength - Level 8
DRAM Data Drive Strength - Level 2
Max Async Latency - 7.0
Read Preamble Time - Auto
IdleCycle Limit - 256 Cycles
Dynamic Counter - Disable
R/W Queue Bypass - 16 x
Bypass Max - 07 x
32 Byte Granularity - Disable(8 Bursts)



==========


Prime95 + 3dMark2001SE + CPU-Z 1.28 + Everest 1.51:

http://i11.photobuck.../OCDBX22600.jpg

3dMark2003:

http://i11.photobuck...4003dmark03.jpg


3dMark2005:

http://i11.photobuck...4003dmark05.jpg

Aquamark 3d:


http://i11.photobuck...s1/aquamark.jpg

Pcmark05:

http://i11.photobuck...s1/PCmark05.jpg



==========



short description:
237 X 11 @ 2607 Mhz, 1.3v + 113%
2-3-8-3 @ 2.8v vdimm

#27 Beer Moon

Beer Moon

    New Member

  • Members
  • 39 posts

Posted 31 July 2005 - 12:12 PM

DFI LanParty NF4 Ultra-D 6/23-03 BIOS

Venice 3000+ LBBLE 0517GPIW

Antec NEO 480

Crappy Patriot RAM 1024x1

eVGA 6800GT 256MB

Zalman CNPS 7000B-Cu



*
*

*
*

_ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _


Genie BIOS Settings:

FSB Bus Frequency - 285
LDT/FSB Frequency Ration - 3x
CPU/FSB Frequency Ratio - x9.0
PCI eXpress Frequency - 100Mhz

CPU VID StartUp Value - 1.5

CPU VID Control - 1.325v
CPU VID Special Control - 123%
LDT Voltage Control - 1.30v
Chip Set Voltage Control - 1.70v
DRAM Voltage Control - 2.8v


DRAM Configuration Settings:

DRAM Frequency Set - 150 (DRAM/FSB:3/04)
Command Per Clock (CPC) - Auto
CAS Latency Control (Tcl) - 3.0
RAS# to CAS# delay (Trcd) - 3
Min RAS# active time (Tras) - 7
Row precharge time (Trp) - 3
Row Cycle time (Trc) - 07 Bus Clocks
Row refresh cyc time (Trfc) - Auto
Row to Row delay (Trrd) - 02 Bus Clocks
Write recovery time (Twr) - 02 Bus Clocks
Write to Read delay (Twtr) - 02 Bus Clocks
Read to Write delay (Trwt) - 03 Bus Clocks
Refresh Period (Tref) - 3120 Cycles
Write CAS Latency (Twcl) - Auto
DRAM Bank Interleave - Enabled



DQS Skew Control - Auto
DQS Skew Value - 0
DRAM Drive Strength - Auto
DRAM Data Drive Strength - Auto
Max Async Latency - Auto
Read Preamble Time - Normal
IdleCycle Limit - 256 Cycles
Dynamic Counter - Disable
R/W Queue Bypass - 16 x
Bypass Max - 07 x
32 Byte Granularity - Disable(4 Bursts)




_ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _


CLICK HERE for CPUZ x 2, and the Memory Bench from Everest, and Motherboard Monitor just for kicks. OH! Prime 95 14+ hours also on there.

3dMark01SE

3dMark03

3dMark05

Posted Image

In other words, Venice 3000+ overclocked to 2567Mhz on 1.552v (reported), running cool at 36C Idle and about 50C Load on a DFI LanParty Ultra-D and an Antec NEO 480. With horribly crappy Patriot RAM that is preventing me from going any higher. Haha.

#28 sasquatch1313

sasquatch1313

    New Member

  • Members
  • 29 posts

Posted 02 August 2005 - 05:48 AM

DFI LANPARTY UT nF4 Ultra-D - BIOS 623.2

AMD Athlon 64 X2 4400+ Toledo Socket 939 Processor Model ADA4400CDBOX - CCBWE 0518 stepping

2x1024MB OCZ PC3200 Performance OCZ4002048PFDC-K

Sapphire Radeon X850XT 256 MB 256-bit GDDR3 PCI-Express x16, Omega 2.6.53 (Cat 5.7), 520/1080

2x Hitachi Deskstar T7K250 160GB 7200 RPM SATAII Hard Drive (RAID-0)

NEC ND-3540A Black IDE DVD burner Drive

SeaSonic S12-600 600W 24-pin ATX power supply

Swiftech Storm CPU Block, Danger Den Maze 4 GPU Block, Swiftech MCP655 Pump, Double Heatercore
*
*

==========


Genie BIOS Settings:

FSB Bus Frequency - 270
LDT/FSB Frequency Ration - Auto
CPU/FSB Frequency Ratio - 10
PCI eXpress Frequency - 100Mhz

CPU VID StartUp Value - 1.500v

CPU VID Control - 1.500v
CPU VID Special Control - Auto
LDT Voltage Control - 1.30v
Chip Set Voltage Control - 1.70v
DRAM Voltage Control - 2.60v


DRAM Configuration Settings:

DRAM Frequency Set - 166 (DRAM/FSB:5/06)
Command Per Clock (CPC) - Enable
CAS Latency Control (Tcl) - 2.5
RAS# to CAS# delay (Trcd) - 03 Bus Clocks
Min RAS# active time (Tras) - 08 Bus Clocks
Row precharge time (Trp) - 03 Bus Clocks
Row Cycle time (Trc) - 11 Bus Clocks
Row refresh cyc time (Trfc) - 17 Bus Clocks
Row to Row delay (Trrd) - 02 Bus Clocks
Write recovery time (Twr) - 02 Bus Clocks
Write to Read delay (Twtr) - 01 Bus Clocks
Read to Write delay (Trwt) - 02 Bus Clocks
Refresh Period (Tref) - Auto
Write CAS Latency (Twcl) - 01
DRAM Bank Interleave - Enabled



DQS Skew Control - Increase Skew
DQS Skew Value - 50
DRAM Drive Strength - Level 6
DRAM Data Drive Strength - Level 1
Max Async Latency - 7.0 ns
DRAM Response Time - Normal
Read Preamble Time - 4.0 ns
IdleCycle Limit - 32 Cycles
Dynamic Counter - Disable
R/W Queue Bypass - 16 x
Bypass Max - 07 x
32 Byte Granularity - Disable(4 Bursts)



==========


Prime95 + 3dMark2001SE + CPU-Z 1.26:

http://www.personal....-Z 3DMark01.jpg


3dMark2003:

Posted Image


3dMark2005:

Posted Image


Aquamark 3d:

Posted Image


Everest Read:

Posted Image


Everest Write:

Posted Image


Everest Latency:

Posted Image


==========

Load Temps:
CPU 39C
PWMIC 47C
Chipset 40C

short description:
270x10 @ 2700Mhz, 1.500v
2.5-3-8-3 @ 225Mhz 2.6v vdimm

#29 tmd5

tmd5

    New Member

  • Members
  • 1 posts

Posted 03 August 2005 - 07:05 AM

DFI LANPARTY nF4 ultra-d - 5/10FIX-1 BIOS

AMD Athlon 64 3000+ Venice Socket 939 Processor Model - YBBLE 0523 DPAW stepping

2x512MB OCZ EL Platinum revision 2 V1.1 TCC5 memory

Leadtek 6800GT 256MB GDDR3 PCI-Express, Dual DVI-I ---> 7.7.7.2 - @415/1115

1x Western Digital WD800JB 80GB IDE 8MB 7200RPM

Pioneer- DVD-ROM DVD-115

Hiper Type-R 580W blue

Arctic Freezer 64 copper heatpipe heatsink/fan



======================


Genie BIOS Settings:

FSB Bus Frequency - 280
LDT/FSB Frequency Ration - x3
CPU/FSB Frequency Ratio - x9
PCI eXpress Frequency - 100Mhz

CPU VID StartUp Value - 1.5v

CPU VID Control - 1.3v
CPU VID Special Control - Avove VID * 126%
LDT Voltage Control - 1.20v
Chip Set Voltage Control - 1.50v
DRAM Voltage Control - 2.7v


DRAM Configuration Settings:

DRAM Frequency Set - 200 (DRAM/FSB:1/01)
Command Per Clock (CPC) - Enable
CAS Latency Control (Tcl) - 2.5
RAS# to CAS# delay (Trcd) - 04 Bus Clocks
Min RAS# active time (Tras) - 08 Bus Clocks
Row precharge time (Trp) - 03 Bus Clocks
Row Cycle time (Trc) - 10 Bus Clocks
Row refresh cyc time (Trfc) - 18 Bus Clocks
Row to Row delay (Trrd) - 03 Bus Clocks
Write recovery time (Twr) - 03 Bus Clocks
Write to Read delay (Twtr) - 02 Bus Clocks
Read to Write delay (Trtw) - 03 Bus Clocks
Refresh Period (Tref) - 4708 Cycles
Write CAS Latency (Twcl) - Auto
DRAM Bank Interleave - Enabled



DQS Skew Control - Slower
DQS Skew Value - 128
DRAM Drive Strength - Level 7
DRAM Data Drive Strength - Level 3
Max Async Latency - 8ns
Read Preamble Time - 7ns
IdleCycle Limit - 256 Cycles
Dynamic Counter - Disable
R/W Queue Bypass - 16 x
Bypass Max - 07 x
32 Byte Granularity - Disable(4 Bursts)



====================


Prime95 + 3dMark2001SE + CPU-Z 1.26 + Everest 1.51:

http://img343.images...prime3d14gv.jpg

3dMark2003:

Posted Image

3dMark2005:

Posted Image

Aquamark 3d:

Posted Image


======================


short description:
280x9 @ 2520Mhz, 1.3v + 126%
2.5-4-8-3 @ 2.7v vdimm

#30 Angry_Games

Angry_Games

    Honorary Member

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 27999 posts

Posted 08 August 2005 - 11:25 AM

DFI LANPARTY nF4 SLI-DR NF44 SLI-DR - 6/23-2 BIOS (Oskar Wu Alpha BIOS)

AMD Athlon64 3200+ Venice core

2x512MB Corsair 4400C2.5 (XMS512-4400C25, XMS4404v1.1)

Sapphire Radeon X300SE 128MB PCI-E, ATI catalyst 5.6 Drivers

Hitachi 80GB SATA II hdd (8MB cache)

ASUS CD-S520/A5 Black

IDE CD-ROM Drive


OCZ PowerStream

OCZ600ADJ ATX 600W Power Supply - Retail


Thermalright SLK-948U bolt-thru heatsink + Enermax 92mm adjustable fan

*
*

Posted Image

Posted Image

Posted Image


*
*

==========


Genie BIOS Settings:

FSB Bus Frequency - 275
LDT/FSB Frequency Ration - AUTO
CPU/FSB Frequency Ratio - Auto
PCI eXpress Frequency - 100Mhz

CPU VID StartUp Value - 1.550v

CPU VID Control - 1.325v
CPU VID Special Control - Above VID * 126%
LDT Voltage Control - 1.20v
Chip Set Voltage Control - 1.50v
DRAM Voltage Control - 2.80v


DRAM Configuration Settings:

DRAM Frequency Set - 200 (DRAM/FSB:1/01)
Command Per Clock (CPC) - Auto
CAS Latency Control (Tcl) - 2.5
RAS# to CAS# delay (Trcd) - 04 Bus Clocks
Min RAS# active time (Tras) - 08 Bus Clocks
Row precharge time (Trp) - 04 Bus Clocks
Row Cycle time (Trc) - 09 Bus Clocks
Row refresh cyc time (Trfc) - 19 Bus Clocks
Row to Row delay (Trrd) - 03 Bus Clocks
Write recovery time (Twr) - 02 Bus Clocks
Write to Read delay (Twtr) - 02 Bus Clocks
Read to Write delay (Trwt) - 04 Bus Clocks
Refresh Period (Tref) - 2560 Cycles
Write CAS Latency (Twcl) - 05 Bus Clocks
DRAM Bank Interleave - Enabled

DQS Skew Control - Auto
DQS Skew Value - 0
DRAM Drive Strength - Level 7
DRAM Data Drive Strength - Level 2
Max Async Latency - 9.0 Nano Seconds
DRAM Response Time - Fast
Read Preamble Time - 6.0 Nano Seconds
IdleCycle Limit - 256 Cycles
Dynamic Counter - Disable
R/W Queue Bypass - 16 x
Bypass Max - 04 x
32 Byte Granularity - Disable(4 Bursts)



==========


Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest 2.01:

http://www.angrygame...25-275x10-1.jpg


3dMark2003:

Posted Image


3dMark2005:

Posted Image


Aquamark 3d:

Posted Image


Everest Home Edition 2.01 - Memory Writes:

Posted Image


Everest Home Edition 2.01 - Memory Latency:

Posted Image


==========



short description:
275x10 @ 2750Mhz, 1.325v + 126%
2.5-4-8-4 @ 2.8v vdimm

Diablo III arrives at Angry's house:
Posted Image

#31 Fight Game

Fight Game

    Total Nerd

  • Members
  • PipPipPipPipPip
  • 2568 posts
  • Gender:Male

Posted 10 August 2005 - 07:02 PM

DFI LANPARTY UT nF4 SLI-DR - 6/23/2005 Official Bios

AMD Athlon 64 3000+ Venice Socket 939 Processor

2x512mb OCZ EL DDR PC4000 Gold Rev 2 (Hynix DT-D5)

1x eVGA Geforce 6600GT 128MB 128-bit GDDR3 PCI-eX x16 Video Card, 77.72 drivers - 560/1200mhz

2x Maxtor 80GB 7200RPM ATA133 (8mb cache) Hard Drive's (RAID-0)

Samsung CD burner / DVD Player SM-352 52x32x52 (8mb cache)

Enermax 535w 24-pin (SLI ready) ATX Power Supply

Viewsonic Professional Series 19" P95f+b (max res=2048x1536)

Genie BIOS Settings:
FSB Bus Frequency - 306
LDT/FSB Frequency Ration - x 3.0
CPU/FSB Frequency Ratio - x 9.0
PCI eXpress Frequency - 102Mhz
CPU VID StartUp Value - 1.325
CPU VID Control - 1.325v
CPU VID Special Control - Above VID * 123%
LDT Voltage Control - 1.40v
Chip Set Voltage Control - 1.80v
DRAM Voltage Control - 3.20v


DRAM Configuration Settings:
DRAM Frequency Set - 180 (DRAM/FSB:9/10)
Command Per Clock (CPC) - Enable
CAS Latency Control (Tcl) - 2.5
RAS# to CAS# delay (Trcd) - 04 Bus Clocks
Min RAS# active time (Tras) - 08 Bus Clocks
Row precharge time (Trp) - 03 Bus Clocks
Row Cycle time (Trc) - 08 Bus Clocks
Row refresh cyc time (Trfc) - 15 Bus Clocks
Row to Row delay (Trrd) - 02 Bus Clocks
Write recovery time (Twr) - 02 Bus Clocks
Write to Read delay (Twtr) - 02 Bus Clocks
Read to Write delay (Trwt) - 02 Bus Clocks
Refresh Period (Tref) - 3120 Cycles
Write CAS Latency (Twcl) - Auto
DRAM Bank Interleave - Enabled

DQS Skew Control - Increase
DQS Skew Value - 50
DRAM Drive Strength - Level 8
DRAM Data Drive Strength - Level 1
Max Async Latency - 8ns
Dram Response Time - Fast
Read Preamble Time - Auto
IdleCycle Limit - 128 Cycles
Dynamic Counter - Disable
R/W Queue Bypass - 16 x
Bypass Max - 07 x
32 Byte Granularity - Disable(8 Bursts)

==========

Prime95 + 3dMark2001SE + CPU-Z:
Posted Image

Everest: :nod:
Posted Image
Posted Image
Posted Image

3dMark2003:
Posted Image

3dMark2005:
Posted Image

Aquamark 3d:
Posted Image
==========

short description:
306x9 @ 2754Mhz :shake: , 1.325v + 123%
2.5-4-8-3 @ 3.2v vdimm
Completely stock cooling on air, no extra fans
Case is packed with 3 hdds, 2 cd roms, floppy, and messy ide cables!

Dell 24" UltraSharp 2408 (1200p) and 50" hdtv
Windows 10 os
Asus Crosshair VI x370 mainboard
AMD Ryzen 1700 @ 4050mhz cpu

Artic Cooling Freezer 240 AIO cooler
GSkill 16gb ddr4 @ 3333mhz ram
XFX amd390 8gb video
Samsung 960 evo M.2 and 850 pro SATA3 ssd's

PC power & cooling 750w psu
Antec 900 case


#32 OldGuy

OldGuy

    Total Nerd

  • Members
  • PipPipPipPipPip
  • 2618 posts

Posted 12 August 2005 - 05:17 PM

DFI LANPARTY UT NF3 939 AGP Ultra D - BIOS 705

AMD Athlon 64 3700+ San Diego Processor Model ADA3700DAA5BN - Stepping CABGE 0518UPAW

Patriot 3200+ XBLK 512X2 (Slots 1/2 orange)

ATI Radeon x850xt 256MB Omega Catalyst 2.6.53 (5.7)

Hitachi Deskstar SATA II 80g 8m buffer RAID 0X2 (Channel 3/4)

NEC ND-3520A DVD-RRW

Enermax EG701AX-VE SFMA 600W

Thermalright XP-120 HS with Silverstone 110cfm Fan

*
*

Genie BIOS Settings:

CPU Overclock in MHz = 303
Hammer Fid Control = X9
AGP Overclock in MHz = 67
LDT/FSB Frequency Ratio = 3X
AMD K8 Cool and Quiet = Disable


CPU VID Control = 1.525v
CPU Voltage Adjusting = +0.3v
Chipset Voltage Control = 1.75v
Memory Voltage Control = 2.9v
AGP Voltage Control = 1.8v


DRAM Configuration:

Memory Hole for PCI MMIO = Disable
Max Memory Overclock (MHz) = Auto (200)
1T/2T Memory Timing = 2T
Cas# Latency (Tcl) = 2.5
Ras# to Cas# Delay (Trcd) = 4
Min Ras# Active Time (Tras) = 7
Row Precharge time (Trp) = 3
Write Recovery Time (Twr) = 2
Ras#-to-Ras# Delay (trrd) = 4
Row Refresh Time (Trfc) = 13
Row Cycle Time (Trc) = 11
Write-to-Read Delay Twtr) = 2
Read-to-Write Delay (Trwt) = 2
Refresh Rate (Tref) = Auto
Write Cas Latency (Twcl) = 1
Max Asynchronous Latency = 8ns
Read Preamble = 6.0ns
Dynamic Idle Cycle Limit = 256
DDR Output Driving = Weak Drive
DDR DQ Drive Strength = 50% Reduction
ECC Function = Disable



==========


Prime95 + 3dMark2001SE + CPU-Z 1.28 + Everest 1.51:

Posted Image


3dMark2003:

Posted Image


3dMark2005:

Posted Image


Aquamark 3:

Posted Image

Everest Latency:

Posted Image

Everest Write:

Posted Image

Everest Read:

Posted Image

Sandra Bandwidth:

Posted Image

Super PI 1M:

Posted Image


==========



short description:
303 X 9 = 2727 @ 1.525v +0.3
2.5-4-3-7 2T 1:1 @ 2.9v

#33 BiBi

BiBi

    New Member

  • Members
  • 26 posts

Posted 13 August 2005 - 06:44 AM

DFI LANPARTY UT NF4 ULTRA-D - 623-3 BIOS

AMD Athlon 64 3000+ Venice

OCZ EL PC3200 2GB 2X1GB DDR400 CL2-3-2-5 184PIN PIN DUAL CHANNEL MEMORY KIT /W RAMSINK

SAPPHIRE RADEON X800 XL PCI-E 256MB DDR VIDEO CARD, 5.7 Catalyst Drivers - Stock

SEAGATE BARRACUDA 7200.7 160GB SATA W/ NCQ 7200RPM 8MB 8.5MS HARD DRIVE

BENQ DW1640 DVD +RW 16X8X16 -RW 16X6X16 DUAL LAYER +R 8X -R 4X BLACK IDE

FORTRON FSP/SPI AX500-A 500W ATX12V 2.0 24PIN BLUE STORM POWER SUPPLY

Thermalright XP-90 ALUMINUM HEATPIPE COOLER + PANAFLO 92MM HIGH SPEED COOLING FAN 2850RPM 56.8CFM 35DBA 3PIN NO SENSOR

*
*

==========


Genie BIOS Settings:

FSB Bus Frequency - 273
LDT/FSB Frequency Ration - x 3.0
CPU/FSB Frequency Ratio - x 9.0
PCI eXpress Frequency - 100Mhz

CPU VID StartUp Value - 1.450v

CPU VID Control - 1.300v
CPU VID Special Control - Avove VID * 113%
LDT Voltage Control - 1.20v
Chip Set Voltage Control - 1.50v
DRAM Voltage Control - 2.70v


DRAM Configuration Settings:

DRAM Frequency Set - 150 (DRAM/FSB:3/4)
Command Per Clock (CPC) - Enable
CAS Latency Control (Tcl) - 2.0
RAS# to CAS# delay (Trcd) - 03 Bus Clocks
Min RAS# active time (Tras) - 05 Bus Clocks
Row precharge time (Trp) - 02 Bus Clocks
Row Cycle time (Trc) - 13 Bus Clocks
Row refresh cyc time (Trfc) - 16 Bus Clocks
Row to Row delay (Trrd) - 02 Bus Clocks
Write recovery time (Twr) - 02 Bus Clocks
Write to Read delay (Twtr) - 01 Bus Clocks
Read to Write delay (Trwt) - 02 Bus Clocks
Refresh Period (Tref) - 0708 Cycles
Write CAS Latency (Twcl) - Auto
DRAM Bank Interleave - Enabled



DQS Skew Control - Auto
DQS Skew Value - 0
DRAM Drive Strength - Level 8
DRAM Data Drive Strength - Level 2
Max Async Latency - Auto
Read Preamble Time - Auto
IdleCycle Limit - 256 Cycles
Dynamic Counter - Disable
R/W Queue Bypass - 16 x
Bypass Max - 07 x
32 Byte Granularity - Disable(4 Bursts)



==========


Prime95 + 3dMark2001SE + CPU-Z 1.26 + Everest 1.51:
Posted Image


3dMark2003:
Posted Image


3dMark2005:
Posted Image


Aquamark 3d:
Posted Image

Everest Home Edition 1.51:
Posted Image


==========



short description:
273x9 @ 2457Mhz, 1.200v + 123%
2-3-5-2 1T 3:4 @ 2.7v

#34 Boppo

Boppo

    Certified Geek

  • Members
  • PipPipPipPip
  • 1530 posts

Posted 15 August 2005 - 08:49 AM

DFI LANPARTY nF4 Ultra-ATX AMD - 7/04/2005-BTA BIOS
AMD Athlon 64 3700+ San Diego 1GHz FSB Socket 939 Processor Model ADA3700BNBOX - Retail
mushkin Redline XP3500 1GB (2 x 512MB) 184-Pin DDR SDRAM DDR 433 (PC 3500) Unbuffered Dual Channel Kit System Memory Model 991438 - Retail
MSI NX7800GTX-VT2D256E (Lite) Video Card - OEM, 77.72 drivers - 475/1400[/b]
HITACHI Deskstar T7K250 HDT722516DLA380 (0A31637) 160GB 7200 RPM Serial ATA II Hard Drive - OEM
NEC Beige IDE DVD Burner Model ND-3520A BG - OEM
ENERMAX Noisetaker EG701P-VE SFMA ATX12V 600W Power Supply
ThermalTake XP-90 HS&92mm fan.


Genie BIOS Settings:

FSB Bus Frequency - 255
LDT/FSB Frequency Ration - Auto
CPU/FSB Frequency Ratio - x11
PCI eXpress Frequency - 100Mhz

CPU VID StartUp Value - StartUp
CPU VID Control - 1.525v
CPU VID Special Control - Avove VID * 110%
LDT Voltage Control - 1.20v
Chip Set Voltage Control - 1.50v
DRAM Voltage Control - 3.30v


DRAM Configuration Settings:
[color=red]
DRAM Frequency Set - 200 (DRAM/FSB:1/1)
Command Per Clock (CPC) - Enable
CAS Latency Control (Tcl) - 2.0
RAS# to CAS# delay (Trcd) - 03 Bus Clocks
Min RAS# active time (Tras) - 06 Bus Clocks
Row precharge time (Trp) - 02 Bus Clocks
Row Cycle time (Trc) - 14 Bus Clocks
Row refresh cyc time (Trfc) - 16 Bus Clocks
Row to Row delay (Trrd) - 02 Bus Clocks
Write recovery time (Twr) - 02 Bus Clocks
Write to Read delay (Twtr) - 02 Bus Clocks
Read to Write delay (Trwt) - 02 Bus Clocks
Refresh Period (Tref) - 1168

DRAM Bank Interleave - Enabled

DQS Skew Control - Auto
DQS Skew Value - 0
DRAM Drive Strength - Normal 4
DRAM Data Drive Strength - Level 3
Max Async Latency - 7
DRAM Response Time - Fast
Read Preamble Time - 5
IdleCycle Limit - 16 Cycles
Dynamic Counter - Enable
R/W Queue Bypass - 8 x
Bypass Max - 04 x
32 Byte Granularity - Disable(4 Bursts)



Prime95 + 3dMark2001SE + CPU-Z 1.29
Posted Image

3DMark03
Posted Image
3dMark05
Posted Image
Aquamark
Posted Image
Everest
Posted Image

short description:
255x11 @ 2805Mhz, 1.525v + 110%
2-3-6-2 @ 3.3v vdimm


#35 Angry_Games

Angry_Games

    Honorary Member

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 27999 posts

Posted 16 August 2005 - 11:51 AM

DFI LANPARTY nF4 SLI-DR NF4 SLI-DR - 6/23-2 BIOS (Oskar Wu Alpha BIOS)

AMD Athlon64 X2 4400+ DualCore

2x1024MB OCZ PC3200 Platinum OCZ4002048ELDCPE-K

Nvidia 6800GT PCI-Express , 384/1071 76.41 drivers

WD Raptor 36GB 10,000RPM SATA hdd (8MB cache)

ASUS CD-S520/A5 Black IDE CD-ROM Drive

OCZ PowerStream OCZ600ADJ ATX 600W Power Supply - Retail


*
*



*
*

==========


Genie BIOS Settings:

FSB Bus Frequency - 240
LDT/FSB Frequency Ratio - AUTO
CPU/FSB Frequency Ratio - Auto
PCI eXpress Frequency - 100Mhz

CPU VID StartUp Value - 1.500v

CPU VID Control - 1.200v
CPU VID Special Control - Above VID * 113%
LDT Voltage Control - 1.20v
Chip Set Voltage Control - 1.50v
DRAM Voltage Control - 2.80v


DRAM Configuration Settings:

DRAM Frequency Set - 166 (DRAM/FSB:5/06)
Command Per Clock (CPC) - Enabled
CAS Latency Control (Tcl) - 2.5
RAS# to CAS# delay (Trcd) - 03 Bus Clocks
Min RAS# active time (Tras) - 08 Bus Clocks
Row precharge time (Trp) - 03 Bus Clocks
Row Cycle time (Trc) - 13 Bus Clocks
Row refresh cyc time (Trfc) - 16 Bus Clocks
Row to Row delay (Trrd) - 03 Bus Clocks
Write recovery time (Twr) - 03 Bus Clocks
Write to Read delay (Twtr) - 02 Bus Clocks
Read to Write delay (Trwt) - 03 Bus Clocks
Refresh Period (Tref) - Auto
Write CAS Latency (Twcl) - Auto
DRAM Bank Interleave - Enabled

DQS Skew Control - Auto
DQS Skew Value - 0
DRAM Drive Strength - Auto
DRAM Data Drive Strength - Level 2
Max Async Latency - Auto
DRAM Response Time - Fast
Read Preamble Time - Auto
IdleCycle Limit - 256 Cycles
Dynamic Counter - Disable
R/W Queue Bypass - 16 x
Bypass Max - 04 x
32 Byte Granularity - Disable(4 Bursts)



==========


Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest 2.01:

http://www.angrygame...water_2gb-1.jpg


3dMark2003:

Posted Image


3dMark2005:

Posted Image


Aquamark 3d:

Posted Image


==========



short description:
240x11 @ 2640Mhz, 1.200v + 113%
2.5-3-8-3 @ 2.8v vdimm

Diablo III arrives at Angry's house:
Posted Image

#36 THunDA

THunDA

    Posting Nut

  • Members
  • PipPipPipPipPipPip
  • 7030 posts

Posted 16 August 2005 - 05:04 PM

DFI LANPARTY nF4 Ultra-D - 6/23-2 BIOS , IOSS Bios Savior RD1-PMC4

Venice 3200 ADA3200BPBOX Stepping=LBBLE 0515FPBW

OCZ PC3200rev2 4x512mb = 2048mb's TCC5

Powercolor X850Xt vgpu + vdd mods , ZALMAN VF700-CU 2 Ball VGA COOLER.. Official Cat 5.7's 580-621

2x Western Digital Raptor WD360GD 36.7GB 10,000 RPM Serial ATA150 Hard Drive (RAID-0) 16k-16k

Maxtor DiamondMax 10 120GB 3.5" Serial ATA150 Hard Drive

Asus CRW-5224A CD-RW burner

OCZ 600watt PowerStream PSU

Thermalright SLK948 heatsink , VANTEC TD9238H 92mm 2 Ball Cooling Fan

COOLER MASTER CM Stacker STC-T01-UW Black/ Silver Computer Case

COOLER MASTER ALD-V03-UK Black Digital function panel

4x YS-TECH 120X25MM 4-PIN CASE FAN 105.0CFM 45.0DBA

*
*
*
*

==========


Genie BIOS Settings:

FSB Bus Frequency - 275
LDT/FSB Frequency Ration - Auto
CPU/FSB Frequency Ratio - 10
PCI eXpress Frequency - 100Mhz

CPU VID StartUp Value - 1.45v

CPU VID Control - 1.275v
CPU VID Special Control - Avove VID * 123%
LDT Voltage Control - 1.20v
Chip Set Voltage Control - 1.50v
DRAM Voltage Control - 2.70v


DRAM Configuration Settings:

DRAM Frequency Set - 180 (DRAM/FSB:9/10)
Command Per Clock (CPC) - Disable
CAS Latency Control (Tcl) - 2.5
RAS# to CAS# delay (Trcd) - 04 Bus Clocks
Min RAS# active time (Tras) - 08 Bus Clocks
Row precharge time (Trp) - 03 Bus Clocks
Row Cycle time (Trc) - 09 Bus Clocks
Row refresh cyc time (Trfc) - 16 Bus Clocks
Row to Row delay (Trrd) - 03 Bus Clocks
Write recovery time (Twr) - 03 Bus Clocks
Write to Read delay (Twtr) - 02 Bus Clocks
Read to Write delay (Trwt) - 03 Bus Clocks
Refresh Period (Tref) - 4708 Cycles
Write CAS Latency (Twcl) - Auto
DRAM Bank Interleave - Enabled



DQS Skew Control - Auto
DQS Skew Value - 0
DRAM Drive Strength - Level 7
DRAM Data Drive Strength - Level 1
Max Async Latency - 8
DRAM Response Time - Fast
Read Preamble Time - 5.5
IdleCycle Limit - 256 Cycles
Dynamic Counter - Disable
R/W Queue Bypass - 16 x
Bypass Max - 07 x
32 Byte Granularity - Disable(8 Bursts)



==========


Prime95 + 3dMark2001SE + 2x CPU-Z + MBM :

Posted Image


3dMark2003 + Everest :

Posted Image


3dMark2005 :

Posted Image


Aquamark 3d:

Posted Image


==========

short description:
275x10 @ 2750Mhz, 1.275v + 123%
4x512mb's @250mhz 2.5-4-8-3 @ 2.7v vdimm