willyrybone Posted June 7, 2005 Posted June 7, 2005 DFI LANPARTY nF4 Ultra-D - 5/10/2005-2 BIOS AMD Athlon 64 3200+ Venice Integrated into Chip FSB Socket 939 Processor Model ADA3200BPBOX - Retail - LBBLE 0516 OCZ EL Platinum Revision 2 1GB (2 x 512MB) 184-Pin DDR SDRAM Unbuffered DDR 400 (PC 3200) Dual Channel Kit System Memory - Retail Gigabyte GV-NX66128DP GeForce 6600GT Turbo Force Edition PCI Express 128MB DDR Video Card, 73.00 drivers - 500/1120 Seagate Barracuda 7200.7 ST3160023A-RK 160GB 7200 RPM 8MB Cache IDE Ultra ATA100 Hard Drive Western Digital Caviar 120GB 3.5" IDE Ultra ATA100 Hard Drive NEC Black IDE DVD Burner Super Flower / TTGI PLUG-N Power 450W Modular Power Supply Thermalright XP-90 aluminum heatpipe heatsink + THERMALTAKE A2218 92MM UFO SERIES LED FAN - BLUE 26.8/81.2CFM 17/47DBA ========== Genie BIOS Settings: FSB Bus Frequency - 250 LDT/FSB Frequency Ration - 4 CPU/FSB Frequency Ratio - x 10.0 PCI eXpress Frequency - 100Mhz CPU VID StartUp Value - 1.375 CPU VID Control - 1.375v CPU VID Special Control - Avove VID * 110% LDT Voltage Control - 1.20v Chip Set Voltage Control - 1.60v DRAM Voltage Control - 2.70v DRAM Configuration Settings: DRAM Frequency Set - 200 (DRAM/FSB:1/01) Command Per Clock (CPC) - Enable CAS Latency Control (Tcl) - 2.5 RAS# to CAS# delay (Trcd) - 04 Bus Clocks Min RAS# active time (Tras) - 07 Bus Clocks Row precharge time (Trp) - 03 Bus Clocks Row Cycle time (Trc) - 07 Bus Clocks Row refresh cyc time (Trfc) - 14 Bus Clocks Row to Row delay (Trrd) - 03 Bus Clocks Write recovery time (Twr) - 03 Bus Clocks Write to Read delay (Twtr) - 02 Bus Clocks Read to Write delay (Trwt) - 03 Bus Clocks Refresh Period (Tref) - 3120 Cycles Write CAS Latency (Twcl) - 01 DRAM Bank Interleave - Enabled DQS Skew Control - Increase DQS Skew Value - 0 DRAM Drive Strength - Level 5 DRAM Data Drive Strength - Level 1 Max Async Latency - 07.0 ns DRAM Response Time - Fast *** May only be 5/10 BIOS ? *** Read Preamble Time - 05.0 ns IdleCycle Limit - 16 Cycles Dynamic Counter - Disable R/W Queue Bypass - 16 x Bypass Max - 07 x 32 Byte Granularity - Disable(8 Bursts) ========== Prime95 + 3dMark2001SE + CPU-Z 1.26 : http://www4.ncsu.edu/unity/users/j/jbdeese.../OCDB/prime.JPG 3dMark2003: 3dMark2005: Aquamark 3d: Everest: http://www4.ncsu.edu/unity/users/j/jbdeese...CDB/Everest.JPG ========== short description: 250x10 @ 2500Mhz, 1.375v + 110% 2.5-4-3-7 @ 2.7v vdimm Share this post Link to post Share on other sites More sharing options...
loc.o Posted June 7, 2005 Posted June 7, 2005 DFI LANPARTY nF4 Ultra-D 5/10/2 Fixed AMD Athlon 64 4000+ San Diego Socket 939 Processor CABGE 0515 VPMW stepping 2x512MB OCZ VX PC3200 Asus EAX850XTPE Cat 5.8 drivers - 565/590 2x Western Digital Raptor WD360GD 36.7GB 10,000 RPM Serial ATA150 Hard Drive (RAID-0) OCZ Modstream 520w 24-pin ATX power supply Mach II Standard ========== Genie BIOS Settings: FSB Bus Frequency - 250 LDT/FSB Frequency Ration - 4 CPU/FSB Frequency Ratio - 12 PCI eXpress Frequency - 100Mhz CPU VID StartUp Value - 1.45v CPU VID Control - 1.45v CPU VID Special Control - Avove VID * 113% LDT Voltage Control - 1.20v Chip Set Voltage Control - 1.50v DRAM Voltage Control - 3.50v DRAM Configuration Settings: DRAM Frequency Set - 200 (DRAM/FSB:1/01) Command Per Clock (CPC) - Enable CAS Latency Control (Tcl) - 2.0 RAS# to CAS# delay (Trcd) - 02 Bus Clocks Min RAS# active time (Tras) - 05 Bus Clocks Row precharge time (Trp) - 02 Bus Clocks Row Cycle time (Trc) - 07 Bus Clocks Row refresh cyc time (Trfc) - 16 Bus Clocks Row to Row delay (Trrd) - 02 Bus Clocks Write recovery time (Twr) - 02 Bus Clocks Write to Read delay (Twtr) - 01 Bus Clocks Read to Write delay (Trwt) - 02 Bus Clocks Refresh Period (Tref) - 1168 Cycles Write CAS Latency (Twcl) - Auto DRAM Bank Interleave - Enabled DQS Skew Control - Auto DQS Skew Value - 0 DRAM Drive Strength - Level 8 DRAM Data Drive Strength - Auto Max Async Latency - Auto DRAM Response - Normal Read Preamble Time - Auto IdleCycle Limit - 16 Cycles Dynamic Counter - Disable R/W Queue Bypass - 16 x Bypass Max - 07 x 32 Byte Granularity - Disable(4 Bursts) ========== Prime95 + 3dMark2001SE + CPU-Z 1.30: 3dMark2003: 3dMark2005: Aquamark 3d: Everest read: ========== short description: Daily settings 250x12 @ 3000Mhz, 1.425v + 113% 2-2-5-2 @ 3.5v vdimm To play BF2 without crashing i have to clock down about 50 mhz using these settings. Share this post Link to post Share on other sites More sharing options...
malinois1 Posted June 9, 2005 Posted June 9, 2005 DFI LANPARTY nF4 SLI-D 5/10/2005 BIOS AMD Athlon 64 3200+ Venice Socket 939 Processor Model ADA3200BPBOX - LBBLE 0518 stepping 2x512MB OCZ EL Platinum Revision 2 eVGA 256-P2-N376-AX Geforce 6800GT 256MB 256-bit GDDR3 PCI-Express x16 Video Card , 7.1.2.5 drivers - 409/1100 2x HITACHI Deskstar 7K80 HDS728080PLA380 -0A30356 80GB 7200 RPM 8MB Cache Serial ATA II Hard Drive (RAID-0) PCP&Cooling Turbo-Cool 510 Express / SLI THERMALTAKE CL-P0114 120mm Cooling Fan/Heatsink (Big Typhoon * * * * ========== Genie BIOS Settings: FSB Bus Frequency - 278 LDT/FSB Frequency Ration - 3 CPU/FSB Frequency Ratio - 16 16 PCI eXpress Frequency - 100Mhz CPU VID StartUp Value - StartUp CPU VID Control - 1.300v CPU VID Special Control - Avove VID * 126% LDT Voltage Control - 1.30v Chip Set Voltage Control - 1.70v DRAM Voltage Control - 2.8v DRAM Configuration Settings: DRAM Frequency Set - 200 (DRAM/FSB:1/01) Command Per Clock (CPC) - Enable CAS Latency Control (Tcl) - 2.5 RAS# to CAS# delay (Trcd) - 04 Bus Clocks Min RAS# active time (Tras) - 08 Bus Clocks Row precharge time (Trp) - 03 Bus Clocks Row Cycle time (Trc) - 08 Bus Clocks Row refresh cyc time (Trfc) - 16 Bus Clocks Row to Row delay (Trrd) - 03 Bus Clocks Write recovery time (Twr) - 03 Bus Clocks Write to Read delay (Twtr) - 02 Bus Clocks Read to Write delay (Trwt) - 03 Bus Clocks Refresh Period (Tref) - 4708 Cycles Write CAS Latency (Twcl) - Auto DRAM Bank Interleave - Enabled DQS Skew Control - Auto DQS Skew Value - 0 DRAM Drive Strength - Level 7 DRAM Data Drive Strength - Level 2 Max Async Latency - 7.0 Read Preamble Time - Auto IdleCycle Limit - 256 Cycles Dynamic Counter - Disable R/W Queue Bypass - 16 x Bypass Max - 07 x 32 Byte Granularity - Disable(8 Bursts) ========== Prime95 + 3dMark2001SE + CPU-Z 1.29 : http://i11.photobucket.com/albums/a161/mal.../OCDBstable.jpg 3dMark2003: 3dMark2005: Aquamark 3d: Everest Read: ========== short description: 278 X 9 @ 2502 Mhz, 1.3v + 126% 2.5-4-8-3 @ 2.8v vdimm Share this post Link to post Share on other sites More sharing options...
Guest coldcase Posted June 21, 2005 Posted June 21, 2005 DFI LANPARTY nF4 ULTRA D - 5/10-2 BIOS AMD Athlon 64 3700+ San Diego Socket 939 Processor Model ADA3700DAA5BN - CABGE 0515SPMW stepping 2x512MB OCZ PC3200 Plat. Rev2 TCC5 1x XFX Geforce 6600GT 128MB 128-bit GDDR3 PCI-Express x16 Video Card 1x Western Digital SATA 200G HD 1x Western Digital ATA 200G HD LG Black IDE DVD-ROM Drive NEC 3500A Black IDE Burner Drive OCZ Powerstream 520w 24-pin ATX power supply Custom Watercooled * * * * ========== Genie BIOS Settings: FSB Bus Frequency - 290 LDT/FSB Frequency Ration - 3X CPU/FSB Frequency Ratio - 10X PCI eXpress Frequency - 100Mhz CPU VID StartUp Value - 1.500V CPU VID Control - 1.325v CPU VID Special Control - Avove VID * 123% LDT Voltage Control - 1.30v Chip Set Voltage Control - 1.70v DRAM Voltage Control - 2.90v DRAM Configuration Settings: DRAM Frequency Set - 200 (DRAM/FSB:1/01) Command Per Clock (CPC) - Enable CAS Latency Control (Tcl) - 2.5 RAS# to CAS# delay (Trcd) - 04 Bus Clocks Min RAS# active time (Tras) - 08 Bus Clocks Row precharge time (Trp) - 04 Bus Clocks Row Cycle time (Trc) - 08 Bus Clocks Row refresh cyc time (Trfc) - 16 Bus Clocks Row to Row delay (Trrd) - 02 Bus Clocks Write recovery time (Twr) - 02 Bus Clocks Write to Read delay (Twtr) - 02 Bus Clocks Read to Write delay (Trwt) - 02 Bus Clocks Refresh Period (Tref) - 4708 Cycles Write CAS Latency (Twcl) - Auto DRAM Bank Interleave - Enabled DQS Skew Control - Auto DQS Skew Value - 0 DRAM Drive Strength - Level 7 DRAM Data Drive Strength - Level 2 Max Async Latency - 7.0ns DRAM Response Time - Fast Read Preamble Time - Auto IdleCycle Limit - 256 Cycles Dynamic Counter - Disable R/W Queue Bypass - 16 x Bypass Max - 07 x 32 Byte Granularity - Disable(8 Bursts) ========== Prime95 + 3dMark2001SE + CPU-Z 1.26 + Everest 1.51: 3dMark2003: 3dMark2005: Aquamark 3d: ========== Share this post Link to post Share on other sites More sharing options...
rhiridflaidd Posted June 23, 2005 Posted June 23, 2005 DFI LANPARTY nF4 Ultra D NF44 SLI-DR - 3/10/2005 BIOS (DFI official bios) http://www.overclock.co.uk/customer/produc...productid=18208AMD Athlon 64 3200+ Winchester Socket 939 Processor Model ADA3200DIK4BI - ???? 0432 stepping[/url] 2x512MB Crucial Ballistix DDR500 x800 256MB 256-bit GDDR3 PCI-Express x16 Video , Omega drivers2.6.25a - 443core 544(1088)memory Seagate SERIAL SATA Barracuda 7200.7 200Gb 1.5Gb/s[/url] Tagan TG480-U01 480W ATX Silent PSU Retail Boxed Asetek WaterChill Antarctica KT12A-L30 CPU/VGA/Chipset TRIPLE RAD POWER KIT 10mm + 2x Akasa Ultra Quiet Amber Series 120mm Fan * * * ========== Genie BIOS Settings: FSB Bus Frequency - 260 LDT/FSB Frequency Ration - 16 -16 CPU/FSB Frequency Ratio - x10 PCI eXpress Frequency - 105Mhz CPU VID StartUp Value - 1.55 CPU VID Control - 1.475v CPU VID Special Control - Avove VID * 110% LDT Voltage Control - 1.40v Chip Set Voltage Control - 1.70v DRAM Voltage Control - 2.90v DRAM Configuration Settings: DRAM Frequency Set - 200 (DRAM/FSB:1/01) Command Per Clock (CPC) - Enable CAS Latency Control (Tcl) - 2.5 RAS# to CAS# delay (Trcd) - 03 Bus Clocks Min RAS# active time (Tras) - 08 Bus Clocks Row precharge time (Trp) - 03 Bus Clocks Row Cycle time (Trc) - 07 Bus Clocks Row refresh cyc time (Trfc) - 12 Bus Clocks Row to Row delay (Trrd) - 01 Bus Clocks Write recovery time (Twr) - 02 Bus Clocks Write to Read delay (Twtr) - 01 Bus Clocks Read to Write delay (Trwt) - 02 Bus Clocks Refresh Period (Tref) - 0388 Cycles Write CAS Latency (Twcl) - Auto DRAM Bank Interleave - Enabled DQS Skew Control - Decrease skew DQS Skew Value - 10 DRAM Drive Strength - Level 8 DRAM Data Drive Strength - Level 4 Max Async Latency - 07.0 Read Preamble Time - Auto IdleCycle Limit - 256 Cycles Dynamic Counter - Disable R/W Queue Bypass - 16 x Bypass Max - 07 x 32 Byte Granularity - Disable(8 Bursts) ========== Prime95 + 3dMark2001SE + CPU-Z 1.26 http://img284.echo.cx/my.php?image=prim951jo.jpg 3dMark2003: 3dMark2005: Aquamark 3d: Everest 1.51 http://img301.imageshack.us/my.php?image=everest3yv.jpg short description: 260x10 @ 2600Mhz, 1.475v + 110% 2.5-3-3-8 @ 2.9v vdimm 3dmark 05 much improved with latest omega drivers (2.6.42) = 4801 3d marks Better late than never. This is a day in day out setup that's been stable for months. Share this post Link to post Share on other sites More sharing options...
timpanogos Posted July 3, 2005 Posted July 3, 2005 DFI LANPARTY nF4 Ultra-D - 6/23/2005-2 BIOS AMD Athlon 64 FX55 ClawHammer Socket 939 Processor ADAFX55DEI5AS CAA2C 0512VPMW 1228662C50142 2x512MB OCZ EL DDR PC4000 Dual Channel Gold VX XFX PVT18LQT Geforce4 MX4000 64MB DDR AGP 4X/8X Video Card 1x Western Digital Raptor WD740GD 74GB 10,000 RPM 8MB Cache Serial ATA150 Hard Drive NEC 16X DVD+R 8X DVD+RW 4X DVD+R DL 16X DVD-R 6X DVD-RW 16X DVD-ROM 48X CD-R 24X CD-RW 48X CD-ROM 2M Cache IDE DVD Burner Antec TRUEPOWERII TPII-550 ATX12V 550W Power Supply DIY External Dual-Core Dual-120mm 1.25 gallon W/C System ==== Bios Information ====== Genie BIOS Settings: FSB Bus Frequency - 246 LDT/FSB Frequency Ration - 4 CPU/FSB Frequency Ratio - 11 PCI eXpress Frequency - 100Mhz CPU VID StartUp Value - 1.5 CPU VID Control - 1.325v CPU VID Special Control - Above VID * 113% LDT Voltage Control - 1.20v Chip Set Voltage Control - 1.50v DRAM Voltage Control - 3.3v DRAM Configuration Settings: DRAM Frequency Set - 200 (DRAM/FSB:1/01) Command Per Clock (CPC) - Enable CAS Latency Control (Tcl) - 1.5 RAS# to CAS# delay (Trcd) - 02 Bus Clocks Min RAS# active time (Tras) - 05 Bus Clocks Row precharge time (Trp) - 02 Bus Clocks Row Cycle time (Trc) - 07 Bus Clocks Row refresh cyc time (Trfc) - 15 Bus Clocks Row to Row delay (Trrd) - 0 Bus Clocks Write recovery time (Twr) - 02 Bus Clocks Write to Read delay (Twtr) - 01 Bus Clocks Read to Write delay (Trwt) - 02 Bus Clocks Refresh Period (Tref) - 3072 Cycles Write CAS Latency (Twcl) - 1 DRAM Bank Interleave - Enabled DQS Skew Control - increase DQS Skew Value - 128 DRAM Drive Strength - Level 6 DRAM Data Drive Strength - Level 2 Max Async Latency - 7 Response time - Fastest Read Preamble Time - 5 IdleCycle Limit - 16 Cycles Dynamic Counter - Disable R/W Queue Bypass - 8 x Bypass Max - 07 x 32 Byte Granularity - Disable(4 Bursts) =====Prime95, 3dMark2001SE, CPU-Z===== http://i5.photobucket.com/albums/y192/Timp...PrimeStable.png =====3dMark03, SuperPi 32meg, Everest write===== http://i5.photobucket.com/albums/y192/Timp...mark03Final.png =====3dMark05, Everest read===== =====aquaMark3, occt, S&M===== =====short description===== 246x11 @ 2706Mhz, 1.325v + 113% 1.5-2-2-5 @ 3.38v vdimm ** If the pics are bigger then 800600 you need to use the [bimg] tags.. !!!!!!!!!!! Thanks THunDA.. Share this post Link to post Share on other sites More sharing options...
bread Posted July 17, 2005 Posted July 17, 2005 Short description: 260x10 @ 2600Mhz, 1.250v + 126% 2-2-5-2 @ 3.5v vdimm BIOS VERSION = 3-10 DFI LANPARTY nF4 SLi-DR AMD Athlon 64 3200+ Venice OEM (0516 EPGW) BFG Geforce 6800GT 256MB GDDR3 PCI-Express x16 (stock clocks) OCZ 520W Powerstream OCZ 1GB (2 x 512MB) 184-Pin DDR SDRAM DDR 500 (PC 4000) Unbuffered Dual Channel Kit System Memory Model OCZ5001024ELDCGEVX-K Lian Li PC 6099B Thermalright XP90c + Panaflo 92mm High Speed -===========================- Genie BIOS Settings: FSB Bus Frequency - 260 LDT/FSB Frequency Ratio - 4 CPU/FSB Frequency Ratio - X 10.0 PCI eXpress Frequency - 100Mhz CPU VID StartUp Value - StartUp CPU VID Control - 1.250v CPU VID Special Control - Avove VID * 126% LDT Voltage Control - 1.40v Chip Set Voltage Control - 1.70v DRAM Voltage Control - 3.50v DRAM Configuration Settings: DRAM Frequency Set - 200 (DRAM/FSB:1/01) Command Per Clock (CPC) - Enable CAS Latency Control (Tcl) - 1.5 RAS# to CAS# delay (Trcd) - 02 Bus Clocks Min RAS# active time (Tras) - 05 Bus Clocks Row precharge time (Trp) - 02 Bus Clocks Row Cycle time (Trc) - 07 Bus Clocks Row refresh cyc time (Trfc) - 15 Bus Clocks Row to Row delay (Trrd) - 00 Bus Clocks Write recovery time (Twr) - 03 Bus Clocks Write to Read delay (Twtr) - 01 Bus Clocks Read to Write delay (Trwt) - 01 Bus Clocks Refresh Period (Tref) - Auto Write CAS Latency (Twcl) - 01 DRAM Bank Interleave - Enabled DQS Skew Control - Increase DQS Skew Value - 255 DRAM Drive Strength - Level 5 DRAM Data Drive Strength - Level 2 Max Async Latency - 7 ns Read Preamble Time - 5.5 ns IdleCycle Limit - 32 Cycles Dynamic Counter - Disable R/W Queue Bypass - 8 x Bypass Max - 07 x 32 Byte Granularity - Disable(8 Bursts) -===========================- Prime95 + 3dMark2001SE + CPU-Z + Everest: http://img343.imageshack.us/img343/8364/260010gn.jpg 3dMark2003: http://img343.imageshack.us/img343/9959/260028zm.jpg 3dMark2005: http://img343.imageshack.us/my.php?image=260042ex.jpg Aquamark 3d: http://img343.imageshack.us/my.php?image=260030og.jpg For searching: 3200 venice ocz vx 4000 EDIT: Adding BFG 7800 GTX (at stock out of the box clocks) Scores with SAME timings/speed as above. 3dMark2001 SE: http://img349.imageshack.us/img349/296/26007800017yc.jpg 3dMark2003: http://img349.imageshack.us/my.php?image=26007800032nd.jpg 3dMark2005: http://img349.imageshack.us/my.php?image=26007800059hl.jpg Aquamark 3d: http://img349.imageshack.us/my.php?image=26007800aq4kp.jpg Share this post Link to post Share on other sites More sharing options...
THunDA Posted July 20, 2005 Posted July 20, 2005 DFI LANPARTY nF4 Ultra-D - 6/23-2 BIOS , IOSS Bios Savior RD1-PMC4 AMD 64 4000 (IHS Removed) Sandiego Socket 939 Processor Model ADA4000BNBOX - 0515 stepping week OCZ PC3200rev2 4x512mb = 2048mb's TCC5 Powercolor X850Xt vgpu + vdd mods , ZALMAN VF700-CU 2 Ball VGA COOLER.. Official Cat 5.7's 580-621 2x Western Digital Raptor WD360GD 36.7GB 10,000 RPM Serial ATA150 Hard Drive (RAID-0) 16k-16k Maxtor DiamondMax 10 120GB 3.5" Serial ATA150 Hard Drive Asus CRW-5224A CD-RW burner OCZ 600watt PowerStream PSU Thermalright SLK948 heatsink , VANTEC TD9238H 92mm 2 Ball Cooling Fan COOLER MASTER CM Stacker STC-T01-UW Black/ Silver Computer Case COOLER MASTER ALD-V03-UK Black Digital function panel 4x YS-TECH 120X25MM 4-PIN CASE FAN 105.0CFM 45.0DBA * * * * ========== Genie BIOS Settings: FSB Bus Frequency - 264 LDT/FSB Frequency Ration - Auto CPU/FSB Frequency Ratio - 11 PCI eXpress Frequency - 100Mhz CPU VID StartUp Value - 1.55v CPU VID Control - 1.325v CPU VID Special Control - Avove VID * 126% LDT Voltage Control - 1.20v Chip Set Voltage Control - 1.60v DRAM Voltage Control - 2.90v DRAM Configuration Settings: DRAM Frequency Set - 200 (DRAM/FSB:1/01) Command Per Clock (CPC) - Disable CAS Latency Control (Tcl) - 2.5 RAS# to CAS# delay (Trcd) - 04 Bus Clocks Min RAS# active time (Tras) - 08 Bus Clocks Row precharge time (Trp) - 03 Bus Clocks Row Cycle time (Trc) - 09 Bus Clocks Row refresh cyc time (Trfc) - 16 Bus Clocks Row to Row delay (Trrd) - 02 Bus Clocks Write recovery time (Twr) - 02 Bus Clocks Write to Read delay (Twtr) - 01 Bus Clocks Read to Write delay (Trwt) - 02 Bus Clocks Refresh Period (Tref) - 3120 Cycles Write CAS Latency (Twcl) - Auto DRAM Bank Interleave - Enabled DQS Skew Control - Auto DQS Skew Value - 0 DRAM Drive Strength - Level 7 DRAM Data Drive Strength - Level 2 Max Async Latency - 8 DRAM Response Time - Fast Read Preamble Time - 5.5 IdleCycle Limit - 256 Cycles Dynamic Counter - Disable R/W Queue Bypass - 16 x Bypass Max - 07 x 32 Byte Granularity - Disable(8 Bursts) ========== Prime95 + 3dMark2001SE + 2x CPU-Z + MBM + A64Tweaker + RivaTuner vid clocks : 3dMark2003 + Everest + SuperPi 32m + MBM : 3dMark2005 : Aquamark 3d: ========== short description: 264x11 @ 2904Mhz, 1.325v + 126% 4x512mb's @ 2.5-4-8-3 @ 2.9v vdimm Share this post Link to post Share on other sites More sharing options...
Angry_Games Posted July 21, 2005 Posted July 21, 2005 DFI LanParty NF4 SLI-DR (6/23-2 BIOS) AMD Athlon64 Winchester 3200+ socket 939 2x1024MB OCZ PC3200 Platinum OCZ4002048ELDCPE-K Nvidia 6800GT PCI-Express 384/1071, 76.41 drivers WD Raptor 36GB 10,000RPM SATA hdd Asus 52x Quietdrive CD-ROM OCZ 600w Powerstream psu DangerDen TDX watercooling * * * * ========== Genie BIOS Settings: FSB Bus Frequency - 220 LDT/FSB Frequency Ration - Auto CPU/FSB Frequency Ratio - 10 PCI eXpress Frequency - 100Mhz CPU VID StartUp Value - 1.500v CPU VID Control - 1.300v CPU VID Special Control - Avove VID * 110% LDT Voltage Control - 1.40v Chip Set Voltage Control - 1.70v DRAM Voltage Control - 2.80v DRAM Configuration Settings: DRAM Frequency Set - 200 (DRAM/FSB:1/01) Command Per Clock (CPC) - Enable CAS Latency Control (Tcl) - 2.5 RAS# to CAS# delay (Trcd) - 03 Bus Clocks Min RAS# active time (Tras) - 08 Bus Clocks Row precharge time (Trp) - 03 Bus Clocks Row Cycle time (Trc) - 13 Bus Clocks Row refresh cyc time (Trfc) - 17 Bus Clocks Row to Row delay (Trrd) - 03 Bus Clocks Write recovery time (Twr) - 03 Bus Clocks Write to Read delay (Twtr) - 02 Bus Clocks Read to Write delay (Trwt) - 03 Bus Clocks Refresh Period (Tref) - Auto Write CAS Latency (Twcl) - Auto DRAM Bank Interleave - Enabled DQS Skew Control - Auto DQS Skew Value - 0 DRAM Drive Strength - Auto DRAM Data Drive Strength - Level 2 Max Async Latency - 8.0 Nano Seconds DRAM Response Time - Normal Read Preamble Time - 6.0 Nano Seconds IdleCycle Limit - 256 Cycles Dynamic Counter - Disable R/W Queue Bypass - 16 x Bypass Max - 07 x 32 Byte Granularity - Disable(4 Bursts) ========== Prime95 + 3dMark01 + Everest 2.01 + cpu-z http://www.angrygames.com/ocdb/angry/2x1gb...00_220x10-1.jpg full prime load temps: http://www.angrygames.com/ocdb/angry/2x1gb...00_220x10-6.jpg ============== short description: 220x10 @ 2200Mhz, 1.300v + 110% 2x1024MB, 2.5-3-8-3 @ 2.8v vdimm ============== Share this post Link to post Share on other sites More sharing options...
AnjinSan1966 Posted July 24, 2005 Posted July 24, 2005 DFI LANPARTY nF4 SLI-DR - 6/23-2 BIOS AMD Athlon 64 3000+ Venice Socket 939 Processor Model ADA3000BPBOX - LBBLE 0517 EPAW stepping 2x512MB OCZ EL Platinum revision 2 V1.1 TCC5 memory Sapphire Radeon X850XT 256MB GDDR3 PCI-Express,ViVO,Dual DVI-ICATALYST 5.7 - 618/615 2x Samsung SpinPoint P80SD 80GB SATA2 8MB 7200RPM NCQ (RAID-0) Plextor PX-716A - DVD±RW Silverstone ST65ZF 650W PSU SLI-Certified, Dual PCI-E, 20/24pin Thermalright XP-120 aluminum heatpipe heatsink + Papst 4412FGML 120x120x25mm ========== Genie BIOS Settings: FSB Bus Frequency - 300 LDT/FSB Frequency Ration - x3 CPU/FSB Frequency Ratio - x9 PCI eXpress Frequency - 100Mhz CPU VID StartUp Value - 1.5000v CPU VID Control - 1.300v CPU VID Special Control - Avove VID * 123% LDT Voltage Control - 1.30v Chip Set Voltage Control - 1.70v DRAM Voltage Control - 2.90v DRAM Configuration Settings: DRAM Frequency Set - 200 (DRAM/FSB:1/01) Command Per Clock (CPC) - Disable CAS Latency Control (Tcl) - 2.5 RAS# to CAS# delay (Trcd) - 04 Bus Clocks Min RAS# active time (Tras) - 08 Bus Clocks Row precharge time (Trp) - 04 Bus Clocks Row Cycle time (Trc) - 12 Bus Clocks Row refresh cyc time (Trfc) - 16 Bus Clocks Row to Row delay (Trrd) - 03 Bus Clocks Write recovery time (Twr) - 03 Bus Clocks Write to Read delay (Twtr) - 02 Bus Clocks Read to Write delay (Trwt) - 03 Bus Clocks Refresh Period (Tref) - 4708 Cycles Write CAS Latency (Twcl) - Auto DRAM Bank Interleave - Enabled DQS Skew Control - Auto DQS Skew Value - 0 DRAM Drive Strength - Level 7 DRAM Data Drive Strength - Level 2 Max Async Latency - 09.0 Nano Seconds Read Preamble Time - 05.0 Nano Seconds IdleCycle Limit - 256 Cycles Dynamic Counter - Disable R/W Queue Bypass - 16 x Bypass Max - 07 x 32 Byte Granularity - Disable(4 Bursts) ========== Prime95 + 3dMark2001SE + CPU-Z 1.26 + Everest 1.51: http://img297.imageshack.us/my.php?image=pic14jb.jpg 3dMark2003: http://img297.imageshack.us/my.php?image=pic26kv.jpg 3dMark2005: http://img297.imageshack.us/my.php?image=pic36bc.jpg Aquamark 3d: http://img345.imageshack.us/my.php?image=pic45mx.jpg ========== short description: 300x9 @ 2700Mhz, 1.300v + 123% 2.5-4-8-4 @ 2.93v vdimm Share this post Link to post Share on other sites More sharing options...
hifi Posted July 26, 2005 Posted July 26, 2005 DFI Lanparty NF4 Ultra-D - 06/23-05 BIOS Athlon 64 3700+ San Diego 2x512mb OCZ PC4000EL VX Gold Nvidia GeForce 7800 GTX (Benches w/clocks @490/1300 default) 2X WD 74GB Raptors RAID-0 Plextor 716 DVD/CD Enermax 600W SLI Koolance EXOS-AL w/GPU L60 and CPU-300 Waterblocks (Processor will actually do [email protected]+ async, but 250MHz FSB(HTT) only prime stable with VX) ========== Genie BIOS Settings: FSB Bus Frequency - 250 LDT/FSB Frequency Ratio - 4X CPU/FSB Frequency Ratio - 11X PCI eXpress Frequency - 100Mhz CPU VID StartUp Value - 1.50V CPU VID Control - 1.35V CPU VID Special Control - Above VID * 123% LDT Voltage Control - 1.30v Chip Set Voltage Control - 1.50v DRAM Voltage Control - 3.30v DRAM Configuration Settings: DRAM Frequency Set - 200 (DRAM/FSB:1/01) Command Per Clock (CPC) - Enable CAS Latency Control (Tcl) - 2.0 RAS# to CAS# delay (Trcd) - 02 Bus Clocks Min RAS# active time (Tras) - 06 Bus Clocks Row precharge time (Trp) - 02 Bus Clocks Row Cycle time (Trc) - 07 Bus Clocks Row refresh cyc time (Trfc) - 16 Bus Clocks Row to Row delay (Trrd) - 02 Bus Clocks Write recovery time (Twr) - 03 Bus Clocks Write to Read delay (Twtr) - 02 Bus Clocks Read to Write delay (Trwt) - 02 Bus Clocks Refresh Period (Tref) - 3120 Write CAS Latency (Twcl) - Auto DRAM Bank Interleave - Enabled DQS Skew Control - Auto DQS Skew Value - 0 DRAM Drive Strength - Level 8 DRAM Data Drive Strength - Level 2 Max Async Latency - 7ns DRAM Response Time - Fastest Read Preamble Time - Auto IdleCycle Limit - 16 Cycles Dynamic Counter - Disable R/W Queue Bypass - 16 x Bypass Max - 07 x 32 Byte Granularity - Disable(4 Bursts) Prime95+3DMark01+CPU-Z 1.29 (Vcore is wrong it is 1.6V) http://i22.photobucket.com/albums/b306/ana...PU_Mem_3D01.jpg Everest Read: http://i22.photobucket.com/albums/b306/ana...verest_Read.jpg http://i22.photobucket.com/albums/b306/ana...verest_Read.jpg Aquamark: http://i22.photobucket.com/albums/b306/ana...13/Aquamark.jpg 3DMark05: http://i22.photobucket.com/albums/b306/ana...13/3Dmark05.jpg 3DMark03 http://i22.photobucket.com/albums/b306/ana...13/3Dmark03.jpg short description: 250x11 @ 2750Mhz, 1.350v + 123% 2-2-6-2 @ 3.3v vdimm Share this post Link to post Share on other sites More sharing options...
Specter_Sniper Posted July 27, 2005 Posted July 27, 2005 DFI LANPARTY UT nF4 SLI-DR NF4 SLI-DR - 6-23-05 official bios AMD 64 3000+ OEM ADA3000DIK4BI - CBBID 0503 stepping 2X512 OCZ PC 4000 Dual Channel Kit System Memory - Retail- OCZ5001024ELDCGEVX-K - WINBOND UTT - 260 HTT @ 2-2-2-8 @ 3.4V 2X XFX PVT45GUDF3 Geforce 6800GT 256MB 256-bit GDDR3 PCI Express x16 Video Card , 77.72 drivers - 416/1.4 SAMSUNG SpinPoint P Series 40GB 3.5" IDE Ultra ATA133 Hard Drive 2x Western Digital Caviar SE WD1200JS 120GB 7200 RPM 8MB Cache Serial ATA II Hard Drive LITE-ON Black IDE DVD-ROM Drive Model SOHD-16P9S Black LITE-ON Black IDE CD Burner Model SOHR-5239V BK RT ENERMAX All in One Noisetaker Series EG701AX-VE SFMA(24P) 600W Power Supply Lian Li PC-V2000A Silver Computer Case COOLING Copper TDX Block for Athlon64 754/939/940 Black Ice Pro Radiator Danger Den Dual 3 1/2" Floppy Bay Reservoir Hydor L35 * * http://specter-sniper.275mb.com/rigs.htm * * ========== Genie BIOS Settings: FSB Bus Frequency - 260 LDT/FSB Frequency Ration - 4 CPU/FSB Frequency Ratio - 9 PCI eXpress Frequency - 101Mhz CPU VID StartUp Value - 1.525v CPU VID Control - 1.450v CPU VID Special Control - Avove VID * 110% LDT Voltage Control - 1.30v Chip Set Voltage Control - 1.60v DRAM Voltage Control - 3.40v DRAM Configuration Settings: DRAM Frequency Set - 200 (DRAM/FSB:1/01) Command Per Clock (CPC) - Enable CAS Latency Control (Tcl) - 2.0 RAS# to CAS# delay (Trcd) - 02 Bus Clocks Min RAS# active time (Tras) - 08 Bus Clocks Row precharge time (Trp) - 02 Bus Clocks Row Cycle time (Trc) - 07 Bus Clocks Row refresh cyc time (Trfc) - 16 Bus Clocks Row to Row delay (Trrd) - 02 Bus Clocks Write recovery time (Twr) - 02 Bus Clocks Write to Read delay (Twtr) - 02 Bus Clocks Read to Write delay (Trwt) - 02 Bus Clocks Refresh Period (Tref) - 3120 Cycles Write CAS Latency (Twcl) - Auto DRAM Bank Interleave - Enabled DQS Skew Control - Increase skew DQS Skew Value - 0 DRAM Drive Strength - Level 8 DRAM Data Drive Strength - Level 3 Max Async Latency - 08.0 Nano Seconds Read Preamble Time - Auto IdleCycle Limit - 016 Cycles Dynamic Counter - Disable R/W Queue Bypass - 16 x Bypass Max - 07 x 32 Byte Granularity - Disable(4 Bursts) =============================== http://valid.x86-secret.com/show_oc.php?id=29016 Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest 2.01: http://forums.ocmodshop.com/attach.aspx/230/p9501.jpg 3dMark2003: http://forums.ocmodshop.com/attach.aspx/226/3d03.jpg 3dMark2005: http://forums.ocmodshop.com/attach.aspx/227/3d05.jpg Aquamark 3d: http://forums.ocmodshop.com/attach.aspx/228/am3884.jpg ========== short description: 260x9 @ 2340Mhz, 1.450v + 110% 2-2-8-2 @ 3.4v vdimm Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now