ixtapalapaquetl Posted November 26, 2005 Posted November 26, 2005 DFI LANPARTY nF4 Expert SLI-DR - 11/11/2005 BIOS AMD Opteron 175 Dual Core 2 x 1MB L2 Cache (CCBWE 0530TPMW) 2 x 512MB G.Skill F1-4800DSU2-1GBFF (TCCD) XFX GeForce 7800GT, 498/1140 81.87 drivers 2 x Western Digital "Raptor" 36GB 10,000RPM SATA (RAID-0) 1 x Maxtor Diamondax10 300 GB, 16MB Cache Plextor 708a DVD/CD Drive OCZ 520w Powerstream (non-SLI version) Genie BIOS Settings: [COLOR=Red]FSB Bus Frequency............................. - 297 LDT/FSB Frequency Ratio....................... - x 3 CPU/FSB Frequency Ratio....................... - x 10.0 PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - Startup CPU VID Control............................... - 1.550v CPU VID Special Control....................... - Above VID * 102.4% LDT Voltage Control........................... - 1.40v Chip Set Voltage Control...................... - 1.78v DRAM Voltage Control.......................... - 2.84v[/COLOR] DRAM Configuration Settings: [COLOR=Red] DRAM Frequency Set............................ - 200=RAM/FSB:01/01 Command Per Clock (CPC)....................... - Disable CAS Latency Control (Tcl)..................... - 2.5 RAS# to CAS# delay (Trcd)..................... - 04 Bus Clocks Min RAS# active time (Tras)................... - 07 Bus Clocks Row precharge time (Trp)...................... - 03 Bus Clocks Row Cycle time (Trc).......................... - 10 Bus Clocks Row refresh cyc time (Trfc)................... - 13 Bus Clocks Row to Row delay (Trrd)....................... - 02 Bus Clocks Write recovery time (Twr)..................... - 02 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 02 Bus Clocks Refresh Period (Tref)......................... - 3120 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - Level 11 DRAM Data Drive Strength...................... - Level 1(Reduce 50%) Max Async Latency............................. - Auto DRAM Response Time............................ - Fast Read Preamble Time............................ - Auto IdleCycle Limit............................... - 256 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 07 x 32 Byte Granularity........................... - Disable(4 Bursts)[/COLOR] Prime95, 3dMark01, CPU-Z 1.31, Everest Read: 3DMark03, Sandra, Everest Write: 3DMark05, A64 Tweaker, Everest Latency: Aquamark: Short Description: 297x10 = 2970Mhz @ 1.55v*102.4% 2x512 2.5-4-3-7 2T @ 2.82v Share this post Link to post Share on other sites More sharing options...
wevsspot Posted November 27, 2005 Posted November 27, 2005 DFI LANPARTY nF4 Ultra-D - 7/04-2 BigToe BIOS AMD Athlon64 3700 San Diego 2x512MB OCZ PC3700 Gold Revision3 (HYNIX DT-D5) ChainTech 7800GT 256MB, 435/1100 81.85 drivers WD Raptor 74X2 Raid 0 16k Stripe LiteOn DVDRW LiteOn CDRW OCZ PowerStream OCZ520ADJ ATX 520W Power Supply - Retail ========== Genie BIOS Settings: FSB Bus Frequency - 275 LDT/FSB Frequency Ratio - 3 CPU/FSB Frequency Ratio - 10 PCI eXpress Frequency - 102Mhz CPU VID StartUp Value - 1.425v CPU VID Control - 1.375v CPU VID Special Control - Above VID * 113% LDT Voltage Control - 1.30v Chip Set Voltage Control - 1.50v DRAM Voltage Control - 2.90v DRAM Configuration Settings: DRAM Frequency Set - 180=RAM/FSB:09/10 Command Per Clock (CPC) - Enable CAS Latency Control (Tcl) - 2.5 RAS# to CAS# delay (Trcd) - 03 Bus Clocks Min RAS# active time (Tras) - 08 Bus Clocks Row precharge time (Trp) - 03 Bus Clocks Row Cycle time (Trc) - 08 Bus Clocks Row refresh cyc time (Trfc) - 15 Bus Clocks Row to Row delay (Trrd) - 02 Bus Clocks Write recovery time (Twr) - 02 Bus Clocks Write to Read delay (Twtr) - 02 Bus Clocks Read to Write delay (Trwt) - 02 Bus Clocks Refresh Period (Tref) - 3120 Cycles DRAM Bank Interleave - Enabled DQS Skew Control - Increase DQS Skew Value - 50 DRAM Drive Strength - Auto DRAM Data Drive Strength - Level 2 Max Async Latency - 7.0 Nano Seconds DRAM Response Time - Fast Read Preamble Time - 5.0 Nano Seconds IdleCycle Limit - 016 Cycles Dynamic Counter - Disable R/W Queue Bypass - 16 x Bypass Max - 07 x 32 Byte Granularity - Disable(4 Bursts) ========== Prime95 + 3dMark2001 + CPU-Z 1.29 + Everest 1.51 Read: 3dMark2003: 3dMark2005: Aquamark 3d ========== short description: 275X10 @ 2750Mhz, 1.3750v + 113% 2.5-3-8-3 @ 2.9v vdimm Share this post Link to post Share on other sites More sharing options...
THunDA Posted November 28, 2005 Posted November 28, 2005 DFI Ultra-D - 11/14/2005 Beta Bios 4000 Sandiego 0515 2x1024mb Crucial Ballistix Z503 Power Color x850xt @ 580621 with Cat 5.9 1x 20gig Western Digital IDE drive ASUS IDE CD-ROM Drive OCZ 600w Power Stream SLI Edition Thermalright SLK948U with 92mm Panaflo * * * * ========== Genie BIOS Settings: FSB Bus Frequency - 275 LDT/FSB Frequency Ratio - 3 CPU/FSB Frequency Ratio - 10.0 PCI eXpress Frequency - 100Mhz CPU VID StartUp Value - 1.50v CPU VID Control - 1.425v CPU VID Special Control - Above VID * 113% LDT Voltage Control - 1.30v Chip Set Voltage Control - 1.60v DRAM Voltage Control - 2.60v DRAM Configuration Settings: DRAM Frequency Set - 200=RAM/FSB:01/01 Command Per Clock (CPC) - Enable CAS Latency Control (Tcl) - 3 RAS# to CAS# delay (Trcd) - 03 Bus Clocks Min RAS# active time (Tras) - 08 Bus Clocks Row precharge time (Trp) - 03 Bus Clocks Row Cycle time (Trc) - 09 Bus Clocks Row refresh cyc time (Trfc) - 16 Bus Clocks Row to Row delay (Trrd) - 03 Bus Clocks Write recovery time (Twr) - 02 Bus Clocks Write to Read delay (Twtr) - 02 Bus Clocks Read to Write delay (Trwt) - 03 Bus Clocks Refresh Period (Tref) - Auto Write CAS Latency (Twcl) - Auto DRAM Bank Interleave - Enabled DQS Skew Control - Auto DQS Skew Value - 0 DRAM Drive Strength - Auto DRAM Data Drive Strength - Auto Max Async Latency - Auto DRAM Response Time - Normal Read Preamble Time - Auto IdleCycle Limit - 256 Cycles Dynamic Counter - Enable R/W Queue Bypass - 16 x Bypass Max - 07 x 32 Byte Granularity - Disable(4 Bursts) ========== Prime95 + 3dMark2001SE + 2xCPU-Z + MBM : http://img332.imageshack.us/img332/1297/test17dm.jpg 3dMark2003 + Everest : 3dMark2005 : Aquamark 3d: ========== short description: 275x10=2750mhz 3-3-8-3-9-16 2.6vdimm Share this post Link to post Share on other sites More sharing options...
RGone Posted November 28, 2005 Posted November 28, 2005 DFI SLI-DR EXPERT Mother board with Beta Bios 11/25/05. OSA146BNBOX processor. CABYE 0540. XfX 7800GTX Video Card with 81.87 Drivers. PCPower&Cooling 510SLI power supply. OCZ6001024ELCDPE-K PC4800 2x512. Orange Slots. 2x37.4gig Raptors in Raid 0 NVraidRom "Booting". 1x Maxtor 200gig PATA 133. 1x Maxtor 15gig PATA 100. 1x Lite-On Dual Layer DVD/RW. 1x Mitsumi 1.44 Floppy drive. Thermalright XP-90 W/Delta 3 blade 4K RPM 78.4 CFM (on power supply lead). Nvidia 6.66 Driver set using Nvidia Ethernet and onboard sound. Genie BIOS Settings: [color=red] FSB Bus Frequency............................. - 300 LDT/FSB Frequency Ratio....................... - x 3.0 CPU/FSB Frequency Ratio....................... - x10 PCI eXpress Frequency......................... - 102Mhz CPU VID StartUp Value......................... - 1.500v CPU VID Control............................... - 1.400v CPU VID Special Control....................... - Above VID * 114.2% LDT Voltage Control........................... - 1.30v Chip Set Voltage Control...................... - 1.68v DRAM Voltage Control.......................... - 2.80v [/color] DRAM Configuration Settings: [color=blue] DRAM Frequency Set............................ - 200=RAM/FSB:01/01 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 2.5 RAS# to CAS# delay (Trcd)..................... - 4.0 Min RAS# active time (Tras)................... - 10.0 Row precharge time (Trp)...................... - 4.0 Row Cycle time (Trc).......................... - 10 Bus Clocks Row refresh cyc time (Trfc)................... - 14 Bus Clocks Row to Row delay (Trrd)....................... - 03 Bus Clocks Write recovery time (Twr)..................... - 03 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 3120 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 RAM DLL SPEED................................. - High Speed DRAM Drive Strength........................... - Level 5 DRAM Data Drive Strength...................... - Level 2 Max Async Latency............................. - 10.0ns DRAM Response Time............................ - Fast Read Preamble Time............................ - 6.5ns IdleCycle Limit............................... - 256 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 08 x Bypass Max.................................... - 04 x 32 Byte Granularity........................... - Disable(4 Bursts)[/color] Prime and 3D01. 3D03 and 3D05 Benches. Mini-facts: 146 processor at 300x10 =3000Mhz with 2x512 OCZ TCCD and XfX 7800GTX Using the DFI SLI-DR EXPERT Motherboard. RGone... Share this post Link to post Share on other sites More sharing options...
Specter_Sniper Posted December 5, 2005 Posted December 5, 2005 DFI LANPARTY UT nF4 sLI-DR - 7/02-3 BETA BIOS AMD Athlon64 X2 4400+ TOLEDO ADA4400DAA6CD/CCBWE 0532UPMW "IHS REMOVED" 2x512MB OCZ5331024ELDCPE OCZ PC4200 PLATINUM REV 1.0(TCCD) MEMTEST STABLE TO 335 2T 2.5-4-10-4 2X EVGA 7800GT 256MB, 498/1150 81.95 drivers Maxtor 200GB IDE hdd (16MB cache) LITE ON Black IDE DVD-ROM Drive ENERMAX All in One Noisetaker Series EG701AX-VE SFMA(24P) ATX12V 600W Power Supply - Retail CUSTOM DANGER DEN WATER COOLING 30C IDLE 40C LOAD * * ========== Genie BIOS Settings: FSB Bus Frequency - 275 LDT/FSB Frequency Ratio - 3.0 CPU/FSB Frequency Ratio - 10.0 PCI eXpress Frequency - 101Mhz CPU VID StartUp Value - 1.550v CPU VID Control - 1.375 CPU VID Special Control - Above VID * 126% LDT Voltage Control - 1.40v Chip Set Voltage Control - 1.70v DRAM Voltage Control - 2.80v DRAM Configuration Settings: DRAM Frequency Set - 180=RAM/FSB:09/10 Command Per Clock (CPC) - Enable CAS Latency Control (Tcl) - 2.5 RAS# to CAS# delay (Trcd) - 03 Bus Clocks Min RAS# active time (Tras) - 06 Bus Clocks Row precharge time (Trp) - 03 Bus Clocks Row Cycle time (Trc) - 14 Bus Clocks Row refresh cyc time (Trfc) - 16 Bus Clocks Row to Row delay (Trrd) - 02 Bus Clocks Write recovery time (Twr) - 03 Bus Clocks Write to Read delay (Twtr) - 02 Bus Clocks Read to Write delay (Trwt) - 04 Bus Clocks Refresh Period (Tref) - 0648 Cycles Write CAS Latency (Twcl) - Auto DRAM Bank Interleave - Enabled DQS Skew Control - Auto DQS Skew Value - 0 DRAM Drive Strength - Auto DRAM Data Drive Strength - Auto Max Async Latency - 8.0 Nano Seconds DRAM Response Time - NORMAL Read Preamble Time - 6.0 Nano Seconds IdleCycle Limit - 16 Cycles Dynamic Counter - Disable R/W Queue Bypass - 8 x Bypass Max - 04 x 32 Byte Granularity - Auto ========== Prime95 + 3dMark2001SE + CPU-Z 1.31 + Everest Ultamate: 3dMark2003: 3dMark2005: Aquamark 3d: ========== short description: 275x10 @ 2750Mhz, 1.375v + 126% 2.5-3-6-3 @ 2.8v vdimm Share this post Link to post Share on other sites More sharing options...
xinty Posted December 7, 2005 Posted December 7, 2005 DFI LANPARTY nF4 D - 7/04-2 BigToe BIOS AMD Athlon64 3000+ Venice 2 x 512MB Patriot Signiture Line (UTT) Xpertvision 6600@450/1200 128MB DDR3 (not GT) Hitachi 80GB Sata hdd (8MB cache) Acbel I-Power 400W Power Supply (3.3v rail mod) Genie BIOS Settings: FSB Bus Frequency - 300 LDT/FSB Frequency Ratio - 3 CPU/FSB Frequency Ratio - 9 PCI eXpress Frequency - 100Mhz CPU VID StartUp Value - StartUp CPU VID Control - 1.500v CPU VID Special Control - Above VID * 113% LDT Voltage Control - 1.30v Chip Set Voltage Control - 1.60v DRAM Voltage Control - 3.40v (Bios show 3.36v) DRAM Configuration Settings: DRAM Frequency Set - 166 Command Per Clock (CPC) - Enable CAS Latency Control (Tcl) - 2 RAS# to CAS# delay (Trcd) - 02 Bus Clocks Min RAS# active time (Tras) - 05 Bus Clocks Row precharge time (Trp) - 02 Bus Clocks Row Cycle time (Trc) - 07 Bus Clocks Row refresh cyc time (Trfc) - 16 Bus Clocks Row to Row delay (Trrd) - 03 Bus Clocks Write recovery time (Twr) - 03 Bus Clocks Write to Read delay (Twtr) - 02 Bus Clocks Read to Write delay (Trwt) - 03 Bus Clocks Refresh Period (Tref) - Auto DRAM Bank Interleave - Enabled DQS Skew Control - Auto DQS Skew Value - 0 DRAM Drive Strength - Auto DRAM Data Drive Strength - Auto Max Async Latency - 8.0 Nano Seconds DRAM Response Time - Fast Read Preamble Time - 6.0 Nano Seconds IdleCycle Limit - 256 Cycles Dynamic Counter - Disable R/W Queue Bypass - 16 x Bypass Max - 07 x 32 Byte Granularity - Disable(4 Bursts) 3dMark2003: 3dMark2005: short description: 300x9 @ 2700Mhz, 1.500v + 113% 2-2-5-2 @ 3.4v vdimm (Bios show 3.36v) Share this post Link to post Share on other sites More sharing options...
Spirit Posted December 8, 2005 Posted December 8, 2005 DFI LANPARTY nF4 UT SLI-DR - BIOS 704-2bt AMD Athlon64 X2 4800+ Toledo (JH-E6 ~ CCBWE) 2x1024 OCZ Platinum rev.1 (Infineon) MSI 7800GTX 256MB (513/1330) 4x WD Raptor SATA150 RAID 0 PC Power & Cooling TurboCool 510-SLI Sony DRU 710a 16x Dual Layer DVD+/- RW ATA66 Primary / Master =============== Genie BIOS Settings: FSB Bus Frequency - 217 LDT/FSB Frequency Ratio - 5 CPU/FSB Frequency Ratio - 12 PCI eXpress Frequency - 100Mhz CPU VID StartUp Value - Auto CPU VID Control - 1.450v CPU VID Special Control - Above VID * 0% LDT Voltage Control - 1.30v Chip Set Voltage Control - 1.60v DRAM Voltage Control - 2.7v +.03v Enabled DRAM Configuration Settings: DRAM Frequency Set - 200=RAM/FSB:1/01 Command Per Clock (CPC) - Enable CAS Latency Control (Tcl) - 2.0 RAS# to CAS# delay (Trcd) - 03 Bus Clocks Min RAS# active time (Tras) - 07 Bus Clocks Row precharge time (Trp) - 02 Bus Clocks Row Cycle time (Trc) - 07 Bus Clocks Row refresh cyc time (Trfc) - 14 Bus Clocks Row to Row delay (Trrd) - 02 Bus Clocks Write recovery time (Twr) - 02 Bus Clocks Write to Read delay (Twtr) - 01 Bus Clocks Read to Write delay (Trwt) - 02 Bus Clocks Refresh Period (Tref) - 3120 Cycles Write CAS Latency (Twcl) - Auto DRAM Bank Interleave - Enabled DQS Skew Control - Auto DQS Skew Value - 0 DRAM Drive Strength - Auto DRAM Data Drive Strength - Auto Max Async Latency - Auto DRAM Response Time - Normal Read Preamble Time - Auto IdleCycle Limit - 256 Cycles Dynamic Counter - Disable R/W Queue Bypass - 16 x Bypass Max - 04 x 32 Byte Granularity - Disable(4 Bursts) =============== Prime95x2 + 3dMark2001SE + CPU-Z 1.30 + Everest 2.20.405 3dMark2003 3dMark2005 Aquamark 3D =============== short description: Toledo 217x12 2605MHz @ 1.45v 2GB OCZ Plat. 2-3-2-7, 1T, 2.73v Share this post Link to post Share on other sites More sharing options...
ugotd8 Posted December 13, 2005 Posted December 13, 2005 DFI LANPARTY nF4 Ultra-D - 7/04-2 BigToe BIOS AMD Athlon64 X2 4400+ Toledo 2x1024MB Mushkin XP4000 PC4000 ATI All-In-Wonder Radeon X600Pro 256MB DDR PCI Express x16, Catalyst 5.12 X64 Drivers WD Raptor WD360GD 36.7GB 10,000 RPM SATA WD 200G SATA Maxtor MaxlineIII 300G SATA 16MB Lite-On LTC-4816H Combo Drive Pioneer DVR-107D ENERMAX Whisper II EG565P-VE FMA(24P) ATX12V 535W Power Supply * * * * ========== Genie BIOS Settings: FSB Bus Frequency - 260 LDT/FSB Frequency Ratio - 4X CPU/FSB Frequency Ratio - 11X PCI eXpress Frequency - 100Mhz CPU VID StartUp Value - 1.400v CPU VID Control - 1.300v CPU VID Special Control - Above VID * 113% LDT Voltage Control - 1.30v Chip Set Voltage Control - 1.50v DRAM Voltage Control - 2.80v DRAM Configuration Settings: DRAM Frequency Set - 200=RAM/FSB:01/01 Command Per Clock (CPC) - AUTO CAS Latency Control (Tcl) - 3.0 RAS# to CAS# delay (Trcd) - 04 Bus Clocks Min RAS# active time (Tras) - 08 Bus Clocks Row precharge time (Trp) - 03 Bus Clocks Row Cycle time (Trc) - 07 Bus Clocks Row refresh cyc time (Trfc) - 14 Bus Clocks Row to Row delay (Trrd) - 02 Bus Clocks Write recovery time (Twr) - 02 Bus Clocks Write to Read delay (Twtr) - 02 Bus Clocks Read to Write delay (Trwt) - 03 Bus Clocks Refresh Period (Tref) - AUTO Write CAS Latency (Twcl) - 1 clk DRAM Bank Interleave - Enabled DQS Skew Control - Auto DQS Skew Value - 0 DRAM Drive Strength - normal4 DRAM Data Drive Strength - Level 3 Max Async Latency - 8.0 Nano Seconds DRAM Response Time - Normal Read Preamble Time - 5.0 Nano Seconds IdleCycle Limit - 16 Cycles Dynamic Counter - Disable R/W Queue Bypass - 16 x Bypass Max - 07 x 32 Byte Granularity - Disable(4 Bursts) ========== Prime95 + 3dMark2001SE + CPU-Z 1.30 + Everest 2.20 Home: 3dMark2003: 3dMark2005: Sandra 2005 SR2 + SuperPI 2M: ========== short description: 260x11 @ 2866Mhz, 1.300v + 113% 3.0-4-8-3 @ 2.8v vdimm Share this post Link to post Share on other sites More sharing options...
RGone Posted December 16, 2005 Posted December 16, 2005 Customer board for test. Ultra-D w/SLI mod... Bios Version 6.23. 3500+ Winchester. XFX 7800GTX 256 W/ 81.95 Drivers. PCPower&Cooling 510SLI power supply. OCZ PC3200 OCZ4001024WV3DC-K 2x512 from customer. 2x36.4Raptors Raid 0. 1x Maxtor 200gig PATA133. 1x Lite-On Dual Layer DVD/RW. 1x Mitsumi Floppy Drive. OEM 754 Cpu stock HSF combo. Nvidia 6.66 Driver set using Nvidia Ethernet and Onboard Sound. Genie BIOS Settings: [color=red]FSB Bus Frequency............................. - 235 LDT/FSB Frequency Ratio....................... - x 4.0 CPU/FSB Frequency Ratio....................... - x10 PCI eXpress Frequency......................... - 102Mhz CPU VID StartUp Value......................... - 1.425v CPU VID Control............................... - 1.350v CPU VID Special Control....................... - Above VID * 113.0% LDT Voltage Control........................... - 1.30v Chip Set Voltage Control...................... - 1.60v DRAM Voltage Control.......................... - 2.80v[/color] DRAM Configuration Settings: [color=blue]DRAM Frequency Set............................ - 200=RAM/FSB:01/01 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 2.0 RAS# to CAS# delay (Trcd)..................... - 3.0 Min RAS# active time (Tras)................... - 8.0 Row precharge time (Trp)...................... - 2.0 Row Cycle time (Trc).......................... - 12 Bus Clocks Row refresh cyc time (Trfc)................... - 24 Bus Clocks Row to Row delay (Trrd)....................... - 04 Bus Clocks Write recovery time (Twr)..................... - 03 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 3120 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 RAM DLL SPEED.....NOT IN THIS BIOS............ - High Speed DRAM Drive Strength........................... - Level 8/Normal 4 DRAM Data Drive Strength...................... - Level 2 Max Async Latency............................. - 8.0ns DRAM Response Time............................ - Fast Read Preamble Time............................ - 6.0ns IdleCycle Limit............................... - 256 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 08 x Bypass Max.................................... - 04 x 32 Byte Granularity........................... - Disable(4 Bursts)[/color] Prime95 and 3D01. 3D03 and 3D05 Benches. Mini-facts. Customer Ultra-D board passing testing with flying colors at 235X10 Winnie 3500+. RGone... Share this post Link to post Share on other sites More sharing options...
RGone Posted December 16, 2005 Posted December 16, 2005 Customer board for test. Ultra-D w/SLI mod... Bios Version 6.23. 3000+ Winchester from customer. 2xPX6600GT Gainward in SLI mode W/ 81.95 Drivers. PCPower&Cooling 510SLI power supply. OCZ PC3200 OCZ4001024WV3DC-K 2x512 from customer. 2x36.4Raptors Raid 0. 1x Maxtor 200gig PATA133. 1x Lite-On Dual Layer DVD/RW. 1x Mitsumi Floppy Drive. OEM 754 Cpu stock HSF combo. Nvidia 6.66 Driver set using Nvidia Ethernet and Onboard Sound. [b]Genie BIOS Settings:[/b] [color=red]FSB Bus Frequency............................. - 270 LDT/FSB Frequency Ratio....................... - x 3.0 CPU/FSB Frequency Ratio....................... - x9 PCI eXpress Frequency......................... - 102Mhz CPU VID StartUp Value......................... - 1.425v CPU VID Control............................... - 1.350v CPU VID Special Control....................... - Above VID * 113.0% LDT Voltage Control........................... - 1.30v Chip Set Voltage Control...................... - 1.60v DRAM Voltage Control.......................... - 3.10v[/color] [b]DRAM Configuration Settings:[/b] [color=blue]DRAM Frequency Set............................ - 180=RAM/FSB:09/10 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 2.0 RAS# to CAS# delay (Trcd)..................... - 3.0 Min RAS# active time (Tras)................... - 8.0 Row precharge time (Trp)...................... - 2.0 Row Cycle time (Trc).......................... - 12 Bus Clocks Row refresh cyc time (Trfc)................... - 24 Bus Clocks Row to Row delay (Trrd)....................... - 04 Bus Clocks Write recovery time (Twr)..................... - 03 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 3120 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 RAM DLL SPEED......NOT USED THIS BIOS......... - High Speed DRAM Drive Strength........................... - Level 8/Normal 4 DRAM Data Drive Strength...................... - Level 2 Max Async Latency............................. - 8.0ns DRAM Response Time............................ - Fast Read Preamble Time............................ - 6.0ns IdleCycle Limit............................... - 256 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 08 x Bypass Max.................................... - 04 x 32 Byte Granularity........................... - Disable(4 Bursts)[/color] Prime and 3D01 bench: 3D03 and 3D05 benches: Mini-factoid: JoeC. Ultra-D board tested with customer memory and cpu for results pending return to user. 270x9 w/memory on 180. Thanks JoeC. RGone... Share this post Link to post Share on other sites More sharing options...
Angry_Games Posted December 18, 2005 Posted December 18, 2005 DFI LANPARTY nF4 SLI-DR (7/04-2BTA BIOS) AMD Athlon64 3200+ 939 cpu (Venice core) 2x512MB GEIL Ultra-X PC4400 TCCD (GLX1GB4400DC) Nvidia GeForce 6800GT engineering Sample, 385/1095 81.89 drivers Western Digital Raptor 36GB 10,000RPM SATA hdd Asus 52x Quiet-Trak CD-ROM Skyhawk 520w 24-pin ATX power supply * * * * ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 275 LDT/FSB Frequency Ratio....................... - Auto CPU/FSB Frequency Ratio....................... - Auto PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - 1.500v CPU VID Control............................... - 1.500v CPU VID Special Control....................... - Above VID * 110% LDT Voltage Control........................... - 1.30v Chip Set Voltage Control...................... - 1.60v DRAM Voltage Control.......................... - 3.10v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 200=RAM/FSB:01/01 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 2.5 RAS# to CAS# delay (Trcd)..................... - 04 Bus Clocks Min RAS# active time (Tras)................... - 08 Bus Clocks Row precharge time (Trp)...................... - 04 Bus Clocks Row Cycle time (Trc).......................... - 10 Bus Clocks Row refresh cyc time (Trfc)................... - 16 Bus Clocks Row to Row delay (Trrd)....................... - 03 Bus Clocks Write recovery time (Twr)..................... - 03 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 4708 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - Auto DRAM Data Drive Strength...................... - Auto Max Async Latency............................. - 8.0 Nano Seconds DRAM Response Time............................ - Normal Read Preamble Time............................ - 6.0 Nano Seconds IdleCycle Limit............................... - 256 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 04 x 32 Byte Granularity........................... - Disable(4 Bursts) [/color] ========== Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest 2.01: http://www.angrygames.com/ocdb/angry/nf4/g...00_275x10-1.gif 3dMark2003: 3dMark2005: Aquamark 3d: ========== short description: 275x10 @ 2750Mhz, 1.500v + 110% 2.5-4-8-4 @ 3.10v vdimm Share this post Link to post Share on other sites More sharing options...
AMDGamer Posted December 19, 2005 Posted December 19, 2005 DFI LanParty NF4 Ultra-D 704-2bta Bios AMD Athlon64 3200+ Venice ADA3200BPBOX OCZ EL Platinum Revision 2 (512*2) PC3200 TCCD Model #: OCZ4001024ELDCPER2-K eVGA 256-P2-N515-AX Geforce 7800GT @ 1.5v 500Mhz Core 590Mhz Memory WD Caviar SE WD800JD 80GB 7200 RPM 8MB Cache SATA150 Hard Drive NEC Black DVD Burner Model: 3540A Lite-On Black DVD-ROM Model: SOHD-16P9SBLK OCZ Powerstream 520w PSU w/SLi Model: OCZ520ADJSLI Thermaltake BigWater SE Water Cooling Kit w/VGA Waterblock ========== Genie BIOS Settings: FSB Bus Frequency - 270 LDT/FSB Frequency Ratio - 3x LDT Bus Transfer Width - 16/16 CPU/FSB Frequency Ratio - 10x PCI eXpress Frequency - 100 CPU VID Startup Control - 1.5v CPU VID Control - 1.5v CPU VID Special Control - Above VID * 113% LDT Voltage Control - 1.3v Chip Set Voltage Control - 1.5v DRAM Voltage Control - 2.8v DRAM Configuration Settings: DRAM Frequency Set - 200 (DRAM/FSB:1/01) Command Per Clock (CPC) - Enable CAS Latency Control (Tcl) - 2.5 RAS# to CAS# delay (Trcd) - 03 Bus Clocks Min RAS# active time (Tras) - 06 Bus Clocks Row precharge time (Trp) - 03 Bus Clocks Row Cycle time (Trc) - 09 Bus Clocks Row refresh cyc time (Trfc) - 13 Bus Clocks Row to Row delay (Trrd) - 03 Bus Clocks Write recovery time (Twr) - 02 Bus Clocks Write to Read delay (Twtr) - 02 Bus Clocks Read to Write delay (Trwt) - 02 Bus Clocks Refresh Period (Tref) - 3072 Cycles Write CAS Latency (Twcl) - Auto DRAM Bank Interleave - Enabled DQS Skew Control - Auto DQS Skew Value - 255 DRAM Drive Strength - Weak 4 DRAM Data Drive Strength - Level 2 Max Async Latency - 7.0ns DRAM Response Time - Normal Read Preamble Time - 5.0ns IdleCycle Limit - 256 Cycles Dynamic Counter - Enable R/W Queue Bypass - 16 x Bypass Max - 07 x 32 Byte Granularity - Disable(4 Bursts) ========== 3DMark01 SE, Prime95, CPUZ Screens x2 3Dmark03 3DMark05 Aquamark3 Everest Memory Read Benchmark Short Description: 270x10 @ 2700Mhz, 1.5v*113% 2.5-3-6-3 @ 2.8v vdimm Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now