Jump to content
Sign in to follow this  
Angry_Games

Socket 939 Overclocking Database

Recommended Posts

DFI LANPARTY nF4 SLI-DR NF4 SLI-DR - 7/04-2 BigToe BIOS

 

AMD Athlon64 X2 4400+ DualCore

 

4x512MB Centon Advance PC3200 (TCCD)

 

Nvidia 6800GT PCI-Express , 415/1071 76.41 drivers

 

WD Raptor 36GB 10,000RPM SATA hdd (8MB cache)

 

ASUS CD-S520/A5 Black IDE CD-ROM Drive

 

OCZ PowerStream OCZ600ADJ ATX 600W Power Supply - Retail

 

 

*

*

X2_4x512_260x10_bios-1.jpg

 

X2_4x512_260x10_bios-2.jpg

 

X2_4x512_260x10_bios-2b.jpg

 

 

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 260

LDT/FSB Frequency Ratio - AUTO

CPU/FSB Frequency Ratio - x 10.0

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.500v

 

CPU VID Control - 1.350v

CPU VID Special Control - Above VID * 113%

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.50v

DRAM Voltage Control - 3.00v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200=RAM/FSB:01/01

Command Per Clock (CPC) - Disable

CAS Latency Control (Tcl) - 2.5

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 03 Bus Clocks

Row Cycle time (Trc) - 09 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 01 Bus Clocks

Read to Write delay (Trwt) - 02 Bus Clocks

Refresh Period (Tref) - 3120 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 7

DRAM Data Drive Strength - Level 2

Max Async Latency - 8.0 Nano Seconds

DRAM Response Time - Fast

Read Preamble Time - 5.5 Nano Seconds

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 04 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest 2.01:

 

http://www.angrygames.com/ocdb/angry/nf4/X...12_260x10-1.jpg

 

 

3dMark2003:

 

X2_4x512_260x10-2.jpg

 

 

3dMark2005:

 

X2_4x512_260x10-3.jpg

 

 

Aquamark 3d:

 

X2_4x512_260x10-4.jpg

 

 

==========

 

 

 

short description:

260x10 @ 2600Mhz, 1.350v + 113%

2.5-4-8-3 @ 3.0v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 SLI-DR NF4 SLI-DR - 7/04-2 BigToe BIOS

 

AMD Athlon64 4000+ San Diego

 

2x1024 OCZ Gold PC4000 (OCZ5002048ELGE-K)

 

Chaintech 2*6600GT SLI , 560/1114 77.72 drivers

 

2* WD Raptor 36GB 10,000RPM SATA hdd (8MB cache) - RAID-0

 

ASUS CD-S520/A5 Black IDE CD-ROM Drive

 

Skyhawk 570w 24-pin ATX power supply

 

 

*

*

 

250x11_2gb-PC4000_bios-1.jpg

 

250x11_2gb-PC4000_bios-2.jpg

 

250x11_2gb-PC4000_bios-2b.jpg

 

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 250

LDT/FSB Frequency Ratio - AUTO

CPU/FSB Frequency Ratio - x 11.0

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.500v

 

CPU VID Control - 1.375v

CPU VID Special Control - Above VID * 113%

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.50v

DRAM Voltage Control - 2.90v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200=RAM/FSB:01/01

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 3.0

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 09 Bus Clocks

Row precharge time (Trp) - 04 Bus Clocks

Row Cycle time (Trc) - 09 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 03 Bus Clocks

Write recovery time (Twr) - 03 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - Auto

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Auto

DRAM Data Drive Strength - Auto

Max Async Latency - Auto

DRAM Response Time - Fast

Read Preamble Time - Auto

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest 2.01:

 

http://www.angrygames.com/ocdb/angry/nf4/2...gb-PC4000-1.jpg

 

 

3dMark2003:

 

250x11_2gb-PC4000-2.jpg

 

 

3dMark2005:

 

250x11_2gb-PC4000-3.jpg

 

 

Aquamark 3d:

 

250x11_2gb-PC4000-4.jpg

 

 

==========

 

 

 

short description:

250x11 @ 2750Mhz, 1.375v + 113%

3-4-9-4 @ 2.9v vdimm

Share this post


Link to post
Share on other sites

DFI LanParty NF4 Ultra-D 7/04-2 BIOS

 

Venice 3000+ LBBLE 0519GPIW

 

Enermax 485W Noisteaker

 

Mushkin Blue C2 (BH-5 UTT) 2x512

 

Asus X700le

 

Stock Cooler (i have an XP-120 that I will install later this week)

 

_ _ _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _

Genie BIOS Settings:

FSB Bus Frequency - 290

LDT/FSB Frequency Ration - 3x

CPU/FSB Frequency Ratio - x9.0

PCI eXpress Frequency - 105Mhz

 

CPU VID StartUp Value - 1.5

 

CPU VID Control - 1.5v

CPU VID Special Control - Auto

LDT Voltage Control - 1.30v

Chip Set Voltage Control - 1.60v

DRAM Voltage Control - 3.3v

DRAM Configuration Settings:

 

DRAM Frequency Set - 166 (DRAM/FSB:5/06)

Command Per Clock (CPC) - 1T

CAS Latency Control (Tcl) - 2.0

RAS# to CAS# delay (Trcd) - 2

Min RAS# active time (Tras) - 6

Row precharge time (Trp) - 2

Row Cycle time (Trc) - 08 Bus Clocks

Row refresh cyc time (Trfc) - 12

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 01 Bus Clocks

Read to Write delay (Trwt) - 01 Bus Clocks

Refresh Period (Tref) - 3120 Cycles

Write CAS Latency (Twcl) - 5 (Will pass memtest at 1 but crashes in games)

DRAM Bank Interleave - Enabled

 

DQS Skew Control - On

DQS Skew Value - 0

DRAM Drive Strength - 8 (I used 6 for the last couple months)

DRAM Data Drive Strength - 1

Max Async Latency - 7.0ns

Read Preamble Time - 5.0ns

IdleCycle Limit - 16 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

_ _ _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _

 

prime95-10 hours +cpu-z (2) +3dmark01 +3dmark03 +screenshot of 3dmark05

http://www.filefarmer.com/coomar/DFIprime.JPG

 

3dmark05

attachment.php?attachmentid=2163&stc=1

 

aquamark3

attachment.php?attachmentid=2162&stc=1

 

everest read

http://www.filefarmer.com/coomar/everest_read.JPG

 

everest write +A64 Tweaker

http://www.filefarmer.com/coomar/everestwrite_236.JPG

 

everest latency +A64 Tweaker

http://www.filefarmer.com/coomar/everestlatency_236.JPG

Share this post


Link to post
Share on other sites

AMD Athlon 64 FX-55 Claw Hammer Socket 939 Processor Model#:ADAFX55DET5AS

Stepping:AAA2C0435UPCW

 

DFILanparty NF4 Sli-dr 6/23-3 Bios:

http://www.newegg.com/Product/Product.asp?...N82E16813136157

 

1- Seagate Barracuda 250g sata 7200rpm:

http://www.newegg.com/Product/Product.asp?...N82E16822148065

 

2x512MB OCZ EL Platinum revision 2 memory:

http://www.newegg.com/Product/Product.asp?...N82E16820146890

 

evga 256-p2-n376-AX Geforce 6800GT 256MB 256-bit GDDR3 PCI-Express X16 Vid. card

7.1.2.5 drives-409/1100:

http://www.newegg.com/Product/Product.asp?...N82E16814130215

 

PSU: Antec True Power II 480w sli:

http://www.newegg.com/Product/Product.asp?...N82E16817103929

 

Heatsink: xp-90c,Thermalright:

http://www.newegg.com/Product/Product.asp?...N82E16835109122

 

Heatsink fan: Vantec Tornado 92mm (119 cfm):

http://www.newegg.com/Product/Product.asp?...N82E16811999613

 

 

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 215

LDT/FSB Frequency Ration - x3

CPU/FSB Frequency Ratio - x13

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.500v

 

CPU VID Control - 1.325

CPU VID Special Control - Avove VID *114%

LDT Voltage Control - 1.30v

Chip Set Voltage Control - 1.70v

DRAM Voltage Control - 2.80v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200 (DRAM/FSB:1/01)

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2

RAS# to CAS# delay (Trcd) - 02 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 02 Bus Clocks

Row Cycle time (Trc) - 08 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 03 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 3120 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

 

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 7

DRAM Data Drive Strength - Level2

Max Async Latency - 07.0 nano seconds

Read Preamble Time - Auto

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.26

FX-55cpuzprime3Dmark01.jpg

 

 

3dMark2003:

FX-553D034121.jpg

 

3dMark2005:

3Dmark05FX-5577.jpg

 

 

Aquamark 3d:

FX-55aqua77.jpg

 

 

Everest Read:

FX-55everest.jpg

 

 

 

==========

 

 

 

short description:

215x13 @ 2797Mhz, 1.325 + 114%

2-2-8-2 @2.8v vdimm

Share this post


Link to post
Share on other sites

LANPARTY UT nF4 SLI-D 704-2BT bios

 

AMD Athlon 64 3000+ Venicer Socket 939 Processor Model ADA3000 DAA4BP – YBBLE 0525DPCW stepping

 

Corsair TWINX2048-3200C2 2x1GB

 

1x eVGA Geforce 6600GT 128MB 128-bit GDDR3 PCI-Express x16 Video Card

 

2x Western Digital Caviar SE WD1600JD 160GB 7200 RPM 8MB Cache Serial ATA150 Hard Drive – non-Raid

 

TOSHIBA Black 16X DVD-ROM 52X CD-R 32X CD-RW 52X CD-ROM 2M Cache IDE Combo Drive

 

TOSHIBA Black 16X DVD+R 4X DVD+RW 5X DVD+R DL 12X DVD-R 4X DVD-RW 16X DVD-ROM 48X CD-R 24X CD-RW 48X CD-ROM 2M Cache IDE DVD Burner

 

Antec SmartPower 2.0 SP-500 ATX12V 500W Power Supply

 

ZALMAN CNPS7000B-CU 92mm 2 Ball Cooling Fan/Heatsink

 

 

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 270

LDT/FSB Frequency Ration - 3

CPU/FSB Frequency Ratio - 9

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.425v

 

CPU VID Control - 1.425v

CPU VID Special Control - Above VID * 104%

LDT Voltage Control - 1.40v

Chip Set Voltage Control - 1.80v

DRAM Voltage Control - 2.70v

 

DRAM Configuration Settings:

DRAM Frequency Set - 150 (DRAM/FSB:3/04)

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2.0

RAS# to CAS# delay (Trcd) - 03 Bus Clocks

Min RAS# active time (Tras) - 06 Bus Clocks

Row precharge time (Trp) - 03 Bus Clocks

Row Cycle time (Trc) - 07 Bus Clocks

Row refresh cyc time (Trfc) - 14 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 3120

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

 

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Auto

DRAM Data Drive Strength - Auto

Max Async Latency - 8

Read Preamble Time - 6

IdleCycle Limit - 32

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.26 + A64Tweaker:

 

prime3dmark01andcpuz24300qi.th.jpg

 

3dMark2003:

 

24303dmark038hn.th.jpg

 

3dMark2005:

 

24303dmark056ay.th.jpg

 

Aquamark 3d:

 

2430aquamark0jg.th.jpg

 

Everest Memory Read

 

2430memread9gt.th.jpg

 

==========

 

 

 

short description:

270x9 @ 2430Mhz, 1.425v + 104%

2-3-6-3 @ 2.7v vdimm on a 12 divider

Share this post


Link to post
Share on other sites

DFI Lanparty NF4 Ultra-D - 06/23-05 BIOS

 

Athlon 64 3700+ San Diego

 

4x512mb OCZ PC4000 VX Gold EL

 

Nvidia GeForce 7800 GTX

 

2X WD 74GB Raptors RAID-0

 

Plextor 716 DVD/CD

 

Enermax 600W SLI

 

Koolance EXOS-AL w/GPU L60 and CPU-300 Waterblocks

 

 

==========

 

 

Genie BIOS Settings:

 

FSB Bus Frequency - 250

LDT/FSB Frequency Ratio - 4X

CPU/FSB Frequency Ratio - 11X

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.50V

 

CPU VID Control - 1.35V

CPU VID Special Control - Above VID * 123%

LDT Voltage Control - 1.30v

Chip Set Voltage Control - 1.50v

DRAM Voltage Control - 3.30v

 

 

DRAM Configuration Settings:

 

DRAM Frequency Set - 200 (DRAM/FSB:1/01)

Command Per Clock (CPC) - Disable

CAS Latency Control (Tcl) - 2.0

RAS# to CAS# delay (Trcd) - 02 Bus Clocks

Min RAS# active time (Tras) - 06 Bus Clocks

Row precharge time (Trp) - 02 Bus Clocks

Row Cycle time (Trc) - 07 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 03 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 02 Bus Clocks

Refresh Period (Tref) - 3120

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

 

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 8

DRAM Data Drive Strength - Level 2

Max Async Latency - 7ns

DRAM Response Time - Fastest

Read Preamble Time - 6.0ns

IdleCycle Limit - 16 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

Prime95+3DMark01+CPU-Z 1.29 (Vcore is wrong it is 1.6V)

http://i22.photobucket.com/albums/b306/ana...E95_3DM2001.jpg

 

3DMark05:

http://i22.photobucket.com/albums/b306/ana...gs/3DMark05.jpg

 

3DMark03:

http://i22.photobucket.com/albums/b306/ana...gs/3DMark03.jpg

 

Aquamark 3:

http://i22.photobucket.com/albums/b306/ana...3/2Gigs/AQ3.jpg

 

Everest Read:

http://i22.photobucket.com/albums/b306/ana...erest_Read2.jpg

 

Everest Write:

http://i22.photobucket.com/albums/b306/ana...erest_Write.jpg

 

Everest Latency:

http://i22.photobucket.com/albums/b306/ana...est_Latency.jpg

 

short description:

4X512 OCZ PC4000 VX Gold EL

250x11 @ 2750Mhz, 1.350v + 123%

2-2-6-2 @ 3.3v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D - 7/04-2 BigToe BIOS

 

AMD Athlon64 3000+ Venice

 

2x512MB Centon Advance LL (tccd)

 

XFX 7800GTX 256MB, 496/1251 77.77 drivers

 

Maxtor 160GB IDE hdd (8MB cache)

 

ASUS CD-S520/A5 Black IDE CD-ROM Drive

 

OCZ PowerStream OCZ600ADJ ATX 600W Power Supply - Retail

 

 

 

*

*

 

ross_bios-1.jpg

 

ross_bios-2.jpg

 

ross_bios-3.jpg

 

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 300

LDT/FSB Frequency Ratio - AUTO

CPU/FSB Frequency Ratio - AUTO

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.500v

 

CPU VID Control - 1.400v

CPU VID Special Control - Above VID * 113%

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.50v

DRAM Voltage Control - 3.00v

 

DRAM Configuration Settings:

DRAM Frequency Set - 180=RAM/FSB:09/10

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2.5

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 04 Bus Clocks

Row Cycle time (Trc) - 09 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 03 Bus Clocks

Write recovery time (Twr) - 03 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 4708 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 7

DRAM Data Drive Strength - Level 2

Max Async Latency - 8.0 Nano Seconds

DRAM Response Time - Fast

Read Preamble Time - 6.0 Nano Seconds

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest 2.01:

 

http://www.angrygames.com/ocdb/mrkun/ross-1.jpg

 

 

3dMark2003:

 

ross-3.jpg

 

 

3dMark2005:

 

ross-4.jpg

 

 

Aquamark 3d:

 

ross-2.jpg

 

 

==========

 

 

 

short description:

300x9 @ 2700Mhz, 1.400v + 113%

2.5-4-8-4 @ 3.0v vdimm

 

thanks to mrkun of the DFI-Street forum for letting me run this on his motherboard, cpu, and my memory!

Share this post


Link to post
Share on other sites

DFI LanParty UT nF4 SLI-DR - 7/04-2 BigToe BIOS

 

AMD "San Diego" 3700+ CABHE 0525UPMW

 

2048MB Corsair XMS PC3200 Dual Channel Kit Twinx2048-3200c2

 

XFX Geforce 7800GTX 450 MHz Core 1250 MHz Mem

 

Creative Sound Blaster Audigy 2 ZS Platinum Pro

 

Be Quiet! Blackline BQT P5-520W-S1.3 520 Watt PSU

 

2x WD Raptor WD740GD 74GB 10,000 RPM SATA HDD - RAID0 NVRAID controller

 

LITEON LDW-411S Overclocked/Firmware Hacked to 811S IDE DVD Burner

 

Plextor Premium IDE CD Burner

 

Cooler Master Stacker STC-TO1-UW Case

 

Danger Den TDX Block 1/2" Fittings

 

12V DD-D4 Pump

 

Black Ice Xtreme Radiator w/Papst 74CFM Fan and shroud

 

Innovatek Fass-O-Matic Reservoir

 

ClearFlex 60 1/2" ID Tubing

 

----------------------------------

----------------------------------

 

Genie BIOS Settings:

 

FSB Bus Frequency - 240

LDT/FSB Frequency Ratio - AUTO

CPU/FSB Frequency Ratio - 11.0

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - Startup

 

CPU VID Control - 1.325v

CPU VID Special Control - Above VID * 113%

LDT Voltage Control - 1.30v

Chip Set Voltage Control - 1.60v

DRAM Voltage Control - 2.70v

 

DRAM Configuration Settings:

 

DRAM Frequency Set - 200=RAM/FSB:01/01

Command Per Clock (CPC) - Auto

CAS Latency Control (Tcl) - 2.5

RAS# to CAS# delay (Trcd) - 03 Bus Clocks

Min RAS# active time (Tras) - 06 Bus Clocks

Row precharge time (Trp) - 03 Bus Clocks

Row Cycle time (Trc) - 09 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 03 Bus Clocks

Write recovery time (Twr) - 03 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - Auto

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Auto

DRAM Data Drive Strength - Auto

Max Async Latency - Auto

DRAM Response Time - Fast

Read Preamble Time - Auto

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

------------------------------

------------------------------

 

Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest 2.01:

 

http://img320.imageshack.us/img320/7613/12jq.jpg

 

3dMark2003:

 

http://img60.imageshack.us/img60/3015/23cf1.jpg

 

3dMark2005:

 

http://img17.imageshack.us/img17/7282/36if.jpg

 

Aquamark 3d:

 

http://img167.imageshack.us/img167/5844/41sv.jpg

 

--------------------------------

--------------------------------

 

 

short description:

240x11 @ 2640Mhz, 1.325v + 113%

2.5-3-6-3 @ 2.7v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D - 6/23-3 BIOS , IOSS Bios Savior RD1-PMC4

 

Venice 3200 ADA3200BPBOX Stepping=LBBLE 0515FPBW (Using stock cooler this time)

 

OCZ PC4200EL 2x512mb = 1024mb's TCC5 in slots 24

 

Powercolor X850Xt vgpu + vdd mods , ZALMAN VF700-CU 2 Ball VGA COOLER.. Official Cat 5.8's 570-621

 

Maxtor DiamondMax 10 120GB 3.5" Serial ATA150 Hard Drive

 

ENERMAX Whisper II EG565P-VE FMA(24P) ATX12V 535W

 

 

 

*

*

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 300

LDT/FSB Frequency Ration - 3x

CPU/FSB Frequency Ratio - 9

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.45v

 

CPU VID Control - 1.275v

CPU VID Special Control - Avove VID * 123%

LDT Voltage Control - 1.30v

Chip Set Voltage Control - 1.60v

DRAM Voltage Control - 3.0v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200 (DRAM/FSB:1/1)

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2.5

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 03 Bus Clocks

Row Cycle time (Trc) - 13 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 03 Bus Clocks

Write recovery time (Twr) - 03 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 3120 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

 

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 7

DRAM Data Drive Strength - Level 1

Max Async Latency - 9

DRAM Response Time - Fast

Read Preamble Time - 5.5

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(8 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + 2x CPU-Z + MBM :

 

ocdb1medium4aa.jpg

 

 

3dMark2003 :

 

ocdb2medium5fx.jpg

 

 

3dMark2005 :

 

ocdb3medium5fe.jpg

 

 

Aquamark 3d:

 

ocdb4medium1mt.jpg

 

Everest :

 

ocdbreadmedium9xk.jpg

 

==========

 

short description:

[email protected] 2700Mhz, 1.275v + 123%

2x512mb's @300mhz 2.5-4-8-3 @ 3v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 SLI-DR - 7/04-2 BigToe BIOS

 

AMD Athlon64 4000+ San Diego

 

4x1024MB OCZ PC4000 (OCZ5002048ELGE-K)

 

2 - Chaintech 6600GT SLI, 560/1171 77.77 drivers[/color]

 

2 - Western Digital Raptor 10,000RPM 36GB SATA hdd

 

ASUS CD-S520/A5 Black IDE CD-ROM Drive

 

OCZ PowerStream OCZ600ADJ ATX 600W Power Supply - Retail

 

 

 

*

*

 

4gb_240x12_bios-1.jpg

 

4gb_240x12_bios-2.jpg

 

4gb_240x12_bios-2b.jpg

 

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 240

LDT/FSB Frequency Ratio - AUTO

CPU/FSB Frequency Ratio - x 12.0

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.500v

 

CPU VID Control - 1.400v

CPU VID Special Control - Above VID * 113%

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.50v

DRAM Voltage Control - 2.90v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200=RAM/FSB:01/01

Command Per Clock (CPC) - Disable

CAS Latency Control (Tcl) - 3.0

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 09 Bus Clocks

Row precharge time (Trp) - 04 Bus Clocks

Row Cycle time (Trc) - 13 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 03 Bus Clocks

Write recovery time (Twr) - 03 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - AUTO

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Auto

DRAM Data Drive Strength - Auto

Max Async Latency - Auto

DRAM Response Time - Fast

Read Preamble Time - Auto

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest 2.01:

 

http://www.angrygames.com/ocdb/angry/nf4/4...gb_240x12-1.jpg

 

 

3dMark2003:

 

4gb_240x12-2.jpg

 

 

3dMark2005:

 

4gb_240x12-3.jpg

 

 

Aquamark 3d:

 

4gb_240x12-4.jpg

 

 

==========

 

 

 

short description:

240x12 @ 2880Mhz, 1.400v + 113%

3.0-4-9-4 @ 2.9v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D - 6/23-3 BIOS , IOSS Bios Savior RD1-PMC4

 

Venice 3200 ADA3200BPBOX Stepping=LBBLE 0515FPBW (SLK948 with 92mm panaflo M1A)

 

OCZ PC4200EL 4x512mb = 2048mb's TCC5

 

Powercolor X850Xt vgpu + vdd mods , ZALMAN VF700-CU 2 Ball VGA COOLER.. Official Cat 5.8's 570-621

 

Maxtor DiamondMax 10 120GB 3.5" Serial ATA150 Hard Drive

 

ENERMAX Whisper II EG565P-VE FMA(24P) ATX12V 535W

 

 

 

*

*

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 270

LDT/FSB Frequency Ration - 3x

CPU/FSB Frequency Ratio - 10

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.45v

 

CPU VID Control - 1.275v

CPU VID Special Control - Avove VID * 123%

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.50v

DRAM Voltage Control - 3.0v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200 (DRAM/FSB:01/01)

Command Per Clock (CPC) - Disable

CAS Latency Control (Tcl) - 2.5

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 03 Bus Clocks

Row Cycle time (Trc) - 8 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 03 Bus Clocks

Write recovery time (Twr) - 03 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 4708 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

 

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 7

DRAM Data Drive Strength - Level 1

Max Async Latency - 7

DRAM Response Time - Fast

Read Preamble Time - 5.5

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(8 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + 2x CPU-Z + MBM + Everest :

 

ocdb1medium0na.jpg

 

3dMark2003 :

 

ocdb2medium3xi.jpg

 

 

3dMark2005 :

 

ocdb3medium1pc.jpg

 

 

Aquamark 3d:

 

ocdb4medium8kb.jpg

 

==========

 

short description:

[email protected] 2700Mhz, 1.275v + 123%

4x512mb's @270mhz 2.5-4-8-3 @ 3.0v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D - 7/02-2 BIOS

 

AMD Athlon64 3200+ Venice

 

2x512MB OCZ EL DDR PC3200 Gold Edition (Winbond UTT BH-5)

 

XFX Nvidia Geforce 6600 GT 128MB GDDR3, 564/1130 - 77.77 drivers

 

Seagate 250GB 7200.8 SATA hdd

 

Lite-on DVDRW SOHW-1633S

 

Antec SmartPower 2.0 ATX 500W Power Supply - Retail

 

 

 

*

*

 

mbsettings3fq.png

 

memsettings16tu.png

 

memsettings26wl.png

 

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 270

LDT/FSB Frequency Ratio - X 4.0

CPU/FSB Frequency Ratio - X 10.0

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - StartUp

 

CPU VID Control - 1.500v

CPU VID Special Control - Auto

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.60v

DRAM Voltage Control - 3.00v

 

DRAM Configuration Settings:

DRAM Frequency Set - 166=RAM/FSB:05/06

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2

RAS# to CAS# delay (Trcd) - 02 Bus Clocks

Min RAS# active time (Tras) - 05 Bus Clocks

Row precharge time (Trp) - 02 Bus Clocks

Row Cycle time (Trc) - 07 Bus Clocks

Row refresh cyc time (Trfc) - Auto

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 3120 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Auto

DRAM Data Drive Strength - Auto?

Max Async Latency - Auto

DRAM Response Time - Normal

Read Preamble Time - Auto

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 v24.14 + 3dMark2001SE Build 330 + CPU-Z v1.3:

 

pic18eh.th.png

 

 

3dMark2003 v3.6.0:

 

3dmark032tl.png

 

 

3dMark2005 v1.2.0:

 

3dmark057yo.png

 

 

Aquamark 3d:

 

aquamark3d7ze.th.png

 

Everest v2.20.405:

http://img360.imageshack.us/img360/4219/everesthome0nk.png

 

Everest v2.20.405 and ITE Smart Guardian (Temperatures at idle):

tempsidle8ri.th.png

 

==========

 

 

 

short description:

270x10 @ 2700Mhz, 1.500v

2-2-2-5 @ 3.0v vdimm

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×