THEnumber337 Posted March 24, 2007 Posted March 24, 2007 DFI LANPARTY nF4 UT Ultra-D (7/04-2BTA BIOS) AMD Opteron 165 CCBBE 0617FPMW Zalman 9700CNPS LED Heatsink 2x1024MB OCZ EL Platinum PC3200 OCZ4002048ELDCPE-K XFX GeForce 7900GS, 525/1500 93.71 drivers 160GB SAMSUNG SpinPoint P Series SP1614C 7200RPM SATA150 Hard Drive Lite-On CD Burner Corsair 620W Power Supply ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 300 LDT/FSB Frequency Ratio....................... - x3 CPU/FSB Frequency Ratio....................... - x9 PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - Auto CPU VID Control............................... - 1.35v CPU VID Special Control....................... - Auto LDT Voltage Control........................... - 1.30v Chip Set Voltage Control...................... - 1.60v DRAM Voltage Control.......................... - 2.80v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 150=RAM/FSB:03/04 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 3 RAS# to CAS# delay (Trcd)..................... - 3 Min RAS# active time (Tras)................... - 8 Row precharge time (Trp)...................... - 3 Row Cycle time (Trc).......................... - 13 Bus Clocks Row refresh cyc time (Trfc)................... - 17 Bus Clocks Row to Row delay (Trrd)....................... - 03 Bus Clocks Write recovery time (Twr)..................... - 03 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 3120 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - Normal 4 DRAM Data Drive Strength...................... - Level 2 Max Async Latency............................. - 8.0ns DRAM Response Time............................ - Normal Read Preamble Time............................ - 6.0ns IdleCycle Limit............................... - 256 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 07 x 32 Byte Granularity........................... - Disable(4 Bursts) [/color] ========== Orthos + 3dMark2001SE + CPU-Z: 3dMark2003: 3dMark2005: 3dMark 2006: ========== short description: 300*9 @ 2.70Ghz, 1.35v DDR450 3-3-8-3 @ 2.80v vdimm Share this post Link to post Share on other sites More sharing options...
Sharptooth+ Posted March 25, 2007 Posted March 25, 2007 DFI LANPARTY nF4 SLI-DR - BIOS 704-2BTA AMD Opteron 170 2x1MB L2 Cache, CCBBE 0615DPMW Stepping Mushkin XP4000 2x1GB DDR500 Redline, Model 991493 Mushkin XP-650 PSU, Model 550100 MSI NX7900GT-VT2D256E-HD Geforce 256MB PCI-E x16 Video Card 2x Seagate Barracuda 320GB 7200RPM SATA 3.0GB/s 16MB Cache HDD Creative X-Fi XtremeMusic PCI Sound Card Sony Black 1.44MB 3.5" Internal Floppy Drive Sony Black IDE DVD-ROM, Model DDU1615/B2s Plextor 16x DVD-/+R DVD Burner IDE, Model PX-716A Genie BIOS Settings: FSB Bus Frequency............................. - 328 LDT/FSB Frequency Ratio....................... - x3.0 CPU/FSB Frequency Ratio....................... - 9.0 PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - Startup CPU VID Control............................... - 1.350v CPU VID Special Control....................... - Above VID *110% LDT Voltage Control........................... - 1.20v Chip Set Voltage Control...................... - 1.50v DRAM Voltage Control.......................... - 2.70v DRAM Configuration Settings: DRAM Frequency Set............................ - 166=RAM/FSB:05/06 Command Per Clock (CPC)....................... - Enabled CAS Latency Control (Tcl)..................... - 03 Bus Clocks RAS# to CAS# delay (Trcd)..................... - 03 Bus Clocks Min RAS# active time (Tras)................... - 07 Bus Clocks Row precharge time (Trp)...................... - 03 Bus Clocks Row Cycle time (Trc).......................... - 07 Bus Clocks Row refresh cyc time (Trfc)................... - 14 Bus Clocks Row to Row delay (Trrd)....................... - 02 Bus Clocks Write recovery time (Twr)..................... - 02 Bus Clocks Write to Read delay (Twtr).................... - 01 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 3120 Cycles Write CAS Latency (Twcl)...................... - Auto DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - Weak 3 DRAM Data Drive Strength...................... - Level 1 Max Async Latency............................. - 8 DRAM Response Time............................ - Normal Read Preamble Time............................ - 6 IdleCycle Limit............................... - 16 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 07 x 32 Byte Granularity........................... - Disable(4 Bursts) Orthos + CPU-Z + 3DMark2001SE: 3DMark2003: 3DMark2005: 3DMark2006: Short Description: 328x9 @ 2952Mhz, 1.350v *110% 268.4MHz 3-3-7-3 @ 2.7v vdimm Share this post Link to post Share on other sites More sharing options...
Snowpro Posted March 25, 2007 Posted March 25, 2007 Asus A8N SLI Preminum (1011-006 Bios) AMD x2 4200 CDBHE 0524 RPMW ThermalRight XP-90 Heatsink Panaflo H1b 92mm fan 2x512MB Xerox Micron 5B G XFX 6800Xtreem, 400/1201 ForceWare 83.90's 320gb Seagate ST3320620AS 7200rpm 16mb cache Sata II Lite-On DVDRW SHOW-1693S Corsair HX520w PSU ========== Advanced BIOS Settings: Overclock Profile............................... - Manual x Overclock Options........................... - Disabled x N.O.S. Option................................. - Disabled CPU Frequency.................................. - 228 PCI Express Clock.............................. - 101MHz DDR Voltage..................................... - Auto Chipset Voltage................................. - +1.5v HT Voltage....................................... - +1.20v CPU Multiplier.................................... - x11 CPU Voltage...................................... - 1.425v PCI Clock Syncronization Mode............. - 33.33MHz DRAM Configuration: Memclock Timing Mode....................... - Manual Memclock Index Value........................ - 333 CAS# Latency TCL............................ - 2.5 TRAS.............................................. - 7T TRCD.............................................. - 3T TRP................................................ - 3T TRC................................................ - 11T TRFC.............................................. - 19T TRWT............................................. - 4T TWR.............................................. - 3T Memory Timing (CPC)........................ - 1T S/W DRAM Over 4G Remapping............ - Diasbled H/W DRAM Over 4G Remapping............ - Disabled Hyper Transport Frequency................ - Auto AMD Cool'n'Quiet control.................... - Disabled ========== Prime95 + 3dMark2001SE + CPU-Z + Everest 2.20: 3dMark2003: 3dMark2005: 3dMark 2006: ========== short description: 238x11 @ 2500Mhz, Vcore 1.425v 2.5-3-3-7 @ Auto vdimm Share this post Link to post Share on other sites More sharing options...
mknwatt Posted March 29, 2007 Posted March 29, 2007 DFI LANPARTY nF4 Expert (4/6/06 BIOS) 165 Optron CCBBE 0617FPMW – Storm Rev.2 2x1024MB OCZ PC3200 EL Platinum (OCZ4002048ELDCPE-K) BFG 7600GT OC SLI, 562/1444 93.71 drivers 2x 160GB Western Digital SATA II HDD – Raid 0 LITE-ON DVDRW SHM-165H6S Ultra X Connect2 550W PSU * * ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 305 LDT/FSB Frequency Ratio....................... - x3 CPU/FSB Frequency Ratio....................... - x9 PCI eXpress Frequency......................... - 105MHz CPU VID StartUp Value......................... - Startup CPU VID Control............................... - 1.400V CPU VID Special Control....................... - 114.4% LDT Voltage Control........................... - 1.30v Chip Set Voltage Control...................... - 1.72v DRAM Voltage Control.......................... - 2.80v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 166=RAM/FSB:05/06 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 03 Bus Clocks RAS# to CAS# delay (Trcd)..................... - 03 Bus Clocks Min RAS# active time (Tras)................... - 00 Bus Clocks Row precharge time (Trp)...................... - 02 Bus Clocks Row Cycle time (Trc).......................... - 07 Bus Clocks Row refresh cyc time (Trfc)................... - 13 Bus Clocks Row to Row delay (Trrd)....................... - 02 Bus Clocks Write recovery time (Twr)..................... - 02 Bus Clocks Write to Read delay (Twtr).................... - 01 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 3120 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - Level 08 DRAM Data Drive Strength...................... - Level 1 Max Async Latency............................. - 7.0 ns DRAM Response Time............................ - Normal Read Preamble Time............................ - 6.5 ns IdleCycle Limit............................... - 256 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 07 x 32 Byte Granularity........................... - Disable(4 Bursts) [/color] ========== Orthos + 3dMark2001SE (31620) + CPU-Z + Everest 3.50.761: 3dMark2003 (23221): 3dMark2005 (11363): 3dMark 2006 (5958): ========== short description: 305x9 @ 2745MHz, 1.60V 3-3-0-2 @ 2.80V vdimm Share this post Link to post Share on other sites More sharing options...
bozotheclown Posted April 7, 2007 Posted April 7, 2007 DFI LANPARTY nF4 Ultra-D (7/04-2BTA BIOS) AMD Opteron 185 dual core 4x1024MB Kingston HyperX PC3200 1GB (2x KHX3200AK2/2G) POV 8800GTX, 621/1458/1998 101.70 drivers 2x500GB Seagate 7200.9 sata-2 + 1x 160GB Seagate 7200.8 sata + 1x Hitachi 250GB sata NEC Silver DVD+/-RW/RAM ND-4550A Enermax Liberty 500w Power Supply case: Coolermaster Stacker CPU Cooler:"Thermaltake Big Typhoon + AS5 ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 231 LDT/FSB Frequency Ratio....................... - Auto CPU/FSB Frequency Ratio....................... - Auto PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - Auto CPU VID Control............................... - 1.300v CPU VID Special Control....................... - Auto LDT Voltage Control........................... - 1.20v Chip Set Voltage Control...................... - 1.50v DRAM Voltage Control.......................... - 2.50v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 180=RAM/FSB:09/10 Command Per Clock (CPC)....................... - Auto CAS Latency Control (Tcl)..................... - Auto RAS# to CAS# delay (Trcd)..................... - Auto Min RAS# active time (Tras)................... - Auto Row precharge time (Trp)...................... - Auto Row Cycle time (Trc).......................... - Auto Row refresh cyc time (Trfc)................... - Auto Row to Row delay (Trrd)....................... - Auto Write recovery time (Twr)..................... - Auto Write to Read delay (Twtr).................... - Auto Read to Write delay (Trwt).................... - Auto Refresh Period (Tref)......................... - Auto DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - Auto DRAM Data Drive Strength...................... - Auto Max Async Latency............................. - Auto DRAM Response Time............................ - Normal Read Preamble Time............................ - Auto IdleCycle Limit............................... - Auto Dynamic Counter............................... - Auto R/W Queue Bypass.............................. - Auto Bypass Max.................................... - Auto 32 Byte Granularity........................... - Auto [/color] ========== Orthos + CPU-Z + 3dMark2001SE : 28411 3dMark2003: 36358 3dMark2005: 15306 3dMark 2006: 10191 ========== short description: 231x13 @ 3Ghz, cpu undervolted 3-3-7-2.5, 2t @ 2.60v vdimm Don't bust my nuts over the poor 3dmark scores, I'm running Vista Ultimate64 Gameperformance is pretty good. Share this post Link to post Share on other sites More sharing options...
Capt Proton Posted April 8, 2007 Posted April 8, 2007 DFI LANPARTY nF4 Ultra D (7/04-2BTA BIOS) FX 60 Toledo CCB2E 0608 2x1024MB OCZ PC4000 EB (OCZ5001024EBPE)[2048MB] XFX GeForce 7900GTX, 650/1600 91.31 drivers 2 X Barracuda SATA 7200.10 250GB RAID 0 Benq DW 1655 DVD OCZ GameXstream 600W * * * * ========== [Genie BIOS Settings:] FSB Bus Frequency............................. - 215 LDT/FSB Frequency Ratio....................... - 5X CPU/FSB Frequency Ratio....................... - 14X PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - Auto CPU VID Control............................... - 1.55 CPU VID Special Control....................... - Auto LDT Voltage Control........................... - 1.30v Chip Set Voltage Control...................... - 1.60v DRAM Voltage Control.......................... - 2.6v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 250 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 3 RAS# to CAS# delay (Trcd)..................... - 3 Min RAS# active time (Tras)................... - 8 Row precharge time (Trp)...................... - 2 Row Cycle time (Trc).......................... - 10 Bus Clocks Row refresh cyc time (Trfc)................... - 16 Bus Clocks Row to Row delay (Trrd)....................... - 03 Bus Clocks Write recovery time (Twr)..................... - 02 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 3072 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - Normal 4 DRAM Data Drive Strength...................... - 2 Max Async Latency............................. - 8ns DRAM Response Time............................ - Normal Read Preamble Time............................ - 6ns IdleCycle Limit............................... - 32 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 07 x 32 Byte Granularity........................... - Disable(4 Bursts) [/color] ========== Prime95 + 3dMark2001SE + CPU-Z + Everest 2.20: 3dMark2003: 3dMark2005: 3dMark 2006: ========== short description: 215 X 14 @ 3010Mhz, 1.55 cpu voltages 3-3-8-2 @ 2.60v vdimm Share this post Link to post Share on other sites More sharing options...
soundx98 Posted April 13, 2007 Posted April 13, 2007 DFI NF4 SLI-DR @ 2700MHz – XP Pro 32-Bit DFI LANPARTY nF4 SLI-DR, Tony’s 704-2bta w/MemTest 1.70+ by Tmod AMD Socket 939 X2 3800+ Dual Core (ADA3800DAA5CD LCBKE0643TPMW) 2x 512 Corsair CMX512-3200XL (XMS3208v1.1) PowerColor x800gto, Catalyst 7.3 drivers Hitachi HDT722525DLA380 250G SATA 3.0 NEC-3550A DVD R/RW Silver Antec 550 Trio PSU Stock AMD Opteron Heatpipe HeatSink Antec Super LanBoy * ========== Genie BIOS Settings: FSB Bus Frequency - 270 LDT/FSB Frequency Ratio - 3.0 CPU/FSB Frequency Ratio - x10 PCI eXpress Frequency - 100Mhz CPU VID StartUp Value - AUTO CPU VID Control - 1.4v CPU VID Special Control - Above VID * 110% LDT Voltage Control - 1.20v Chip Set Voltage Control - 1.50v DRAM Voltage Control - 2.80v DRAM Configuration Settings: DRAM Frequency Set - 140=RAM/FSB:07/10 Command Per Clock (CPC) - Enable CAS Latency Control (Tcl) - 2.0 RAS# to CAS# delay (Trcd) - 02 Bus Clocks Min RAS# active time (Tras) - 06 Bus Clocks Row precharge time (Trp) - 02 Bus Clocks Row Cycle time (Trc) - 11 Bus Clocks Row refresh cyc time (Trfc) - 14 Bus Clocks Row to Row delay (Trrd) - 02 Bus Clocks Write recovery time (Twr) - 02 Bus Clocks Write to Read delay (Twtr) - 01 Bus Clocks Read to Write delay (Trwt) - 04 Bus Clocks Refresh Period (Tref) - 3120 Cycles Write CAS Latency (Twcl) - 01 Bus Clocks DRAM Bank Interleave - Enabled DQS Skew Control - Auto DQS Skew Value - 0 DRAM Drive Strength - Level 4 Normal DRAM Data Drive Strength - Level 3 Max Async Latency - 8.0 Nano Seconds DRAM Response Time - Normal Read Preamble Time - 6.0 Nano Seconds IdleCycle Limit - 256 Cycles Dynamic Counter - Enabled R/W Queue Bypass - 08 x Bypass Max - 04 x 32 Byte Granularity - Disable (4 Bursts) ========== Orthos + 3dMark2001SE + CPU-Z 1.39: 3dMark2003: 3DMark2005: 3DMark 2006 ========== short description: 270 x 10 = 2700MHz 2-2-6-2 @ 2.80 vdimm Share this post Link to post Share on other sites More sharing options...
oc newbie Posted April 26, 2007 Posted April 26, 2007 This entry is in tribute to a bro who isn't able to do it himself right now. It will be waiting for you with these settings saved but you still need a better power supply. :tooth: This poor ram is begging me for some more voltage. Here is to thinking about you bud :beer :beer :beer :beer no smiley for skotch so beer will have to do. :shake: DFI LANPARTY nF4 ultra-d modded to sli-d (7/04-2BTA BIOS) AMD opteron 146 (cab1e 0614epaw)alpine 64 cooler 2x512MB OCZ Value VX Nvidia GeForce 6600 Vanilla, 300/500 93.71 x64 drivers 2x320GB Western Digital 7200RPM SATA hdd Lite-on 16xDVD Burner with Litescribe Okia 450 Power Supply X-Blade case * * ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 300 LDT/FSB Frequency Ratio....................... - x3 CPU/FSB Frequency Ratio....................... - 10 PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - auto CPU VID Control............................... - 1.45 CPU VID Special Control....................... - Auto LDT Voltage Control........................... - 1.20v Chip Set Voltage Control...................... - 1.50v DRAM Voltage Control.......................... - 2.90v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 133=RAM/FSB:2/3 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 2 RAS# to CAS# delay (Trcd)..................... - 2 Min RAS# active time (Tras)................... - 5 Row precharge time (Trp)...................... - 2 Row Cycle time (Trc).......................... - 11 Bus Clocks Row refresh cyc time (Trfc)................... - 17 Bus Clocks Row to Row delay (Trrd)....................... - 03 Bus Clocks Write recovery time (Twr)..................... - 03 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 3120 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - normal level 4 DRAM Data Drive Strength...................... - level 2 Max Async Latency............................. - 10ns DRAM Response Time............................ - Normal Read Preamble Time............................ - 8ns IdleCycle Limit............................... - 256 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 04 x 32 Byte Granularity........................... - Disable(4 Bursts) [/color] ========== Stress Prime 2004 + 3dMark2001SE + CPU-Z: 3dMark2003 + Everest: 3dMark2005: 3dMark 2006: ========== short description: air cooled with artic cooling in an X-Blade case 300x10 @ 3000Mhz, 1.45 cpu voltages 200fsb @ 2-2-5-2 @ 2.90v vdimm Share this post Link to post Share on other sites More sharing options...
Glitch05 Posted April 29, 2007 Posted April 29, 2007 DFI Lanparty UT NF4 ULTRA AMD Opteron 170 285x9@2565MHz 2x1024MB G.Skill PC3200 3.4.4.8 EVGA 8800GTS 320Mb 600/900 Seagate 200Gb SATA II LG Combo Drive Thermaltake Toughpower 600W ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 285 LDT/FSB Frequency Ratio....................... - x3 CPU/FSB Frequency Ratio....................... - x9 PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - Startup CPU VID Control............................... - Auto CPU VID Special Control....................... - Auto LDT Voltage Control........................... - 1.30v Chip Set Voltage Control...................... - 1.60v DRAM Voltage Control.......................... - 2.60v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 140=RAM/FSB:07/10 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 3 RAS# to CAS# delay (Trcd)..................... - 4 Min RAS# active time (Tras)................... - 8 Row precharge time (Trp)...................... - 4 Row Cycle time (Trc).......................... - 7 Bus Clocks Row refresh cyc time (Trfc)................... - auto Row to Row delay (Trrd)....................... - 02 Bus Clocks Write recovery time (Twr)..................... - 02 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 3120 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - Auto DRAM Data Drive Strength...................... - Auto Max Async Latency............................. - Auto DRAM Response Time............................ - Fast Read Preamble Time............................ - Auto IdleCycle Limit............................... - 256 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 07 x 32 Byte Granularity........................... - Disable(4 Bursts) [/color] ========== Prime95 + 3dMark2001SE + CPU-Z + Everest 2.20: 3dMark2003: 3dMark2005: 3dMark 2006: ========== short description: 285x9 @ 2565MHz, Auto cpu voltages 3-4-8-4 @ 2.60v vdimm Share this post Link to post Share on other sites More sharing options...
Hemidare Posted April 29, 2007 Posted April 29, 2007 DFI Lanparty UT NF4 Expert AMD Opteron144 Venus CAB1E 0614 BPBW 2x1Gb OCZ EL Platinum PC 3200 @ 500Mhz 2.5-3-3-6 2xBFG 7600gt OC SLI @ 580/1450 250gb Western Digital Sata2 Antec Neopower 480 Watt Cooled By: XP-120 Thermaltake Tsunami Black with Window LG L1952TX (Digital) Logitech X-540 Surround * * ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 334 LDT/FSB Frequency Ratio....................... - x3.0 CPU/FSB Frequency Ratio....................... - x9.0 PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - Startup CPU VID Control............................... - 1.350 CPU VID Special Control....................... - x114.4% LDT Voltage Control........................... - 1.20v Chip Set Voltage Control...................... - 1.52v DRAM Voltage Control.......................... - 2.71v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 150=RAM/FSB:03/04 Command Per Clock (CPC)....................... - Enabled CAS Latency Control (Tcl)..................... - 2.5 RAS# to CAS# delay (Trcd)..................... - 3 Min RAS# active time (Tras)................... - 6 Row precharge time (Trp)...................... - 3 Row Cycle time (Trc).......................... - 12 Bus Clocks Row refresh cyc time (Trfc)................... - 14 Bus Clocks Row to Row delay (Trrd)....................... - 2 Write recovery time (Twr)..................... - 2 Write to Read delay (Twtr).................... - 2 Read to Write delay (Trwt).................... - 2 Refresh Period (Tref)......................... - 3120 DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - Auto DRAM Data Drive Strength...................... - Auto Max Async Latency............................. - 8.0 Nano Seconds DRAM Response Time............................ - Fastest Read Preamble Time............................ - 5.0 IdleCycle Limit............................... - 256 Cycles Dynamic Counter............................... - Enable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 04 x 32 Byte Granularity........................... - Disable(4 Bursts) [/color] ========== SP2004 + 3dMark2001SE + CPU-Z: 3dMark2003: 3dMark2005: 3dMark 2006: ========== short description: 334x09, 3006Ghz, 1.544vcore 2x1024, 3:4, 2.71vdimm Share this post Link to post Share on other sites More sharing options...
Hemidare Posted April 29, 2007 Posted April 29, 2007 DFI LANPARTY nF4 Expert(OCZ Tony's EX406BTA 04/06/2006) Opteron 64 144 2x1024MB OCZ PC3200EL (OCZ4001024ELPE) 2XBFG GeForce 7600GT OC SLI, 580/1450 93.81 drivers 36GB Western Digital Raptor 10,000RPM SATA hdd LG DVDRAM GSA-4163B NeoPower 480 Watt ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 334 LDT/FSB Frequency Ratio....................... - X 3.0 CPU/FSB Frequency Ratio....................... - X 9.0 PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - Auto CPU VID Control............................... - 1.350 CPU VID Special Control....................... - 114.4% LDT Voltage Control........................... - 1.20v Chip Set Voltage Control...................... - 1.52v DRAM Voltage Control.......................... - 2.71v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 150=RAM/FSB:03/04 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 2.5 RAS# to CAS# delay (Trcd)..................... - 3 Min RAS# active time (Tras)................... - 6 Row precharge time (Trp)...................... - 3 Row Cycle time (Trc).......................... - 12 Bus Clocks Row refresh cyc time (Trfc)................... - 14 Bus Clocks Row to Row delay (Trrd)....................... - 02 Bus Clocks Write recovery time (Twr)..................... - 02 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 02 Bus Clocks Refresh Period (Tref)......................... - 3120 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - Auto DRAM Data Drive Strength...................... - Auto Max Async Latency............................. - 8.0 Nano Seconds DRAM Response Time............................ - Fastest Read Preamble Time............................ - 5.0 Nano Seconds IdleCycle Limit............................... - 256 Cycles Dynamic Counter............................... - Enable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 04 x 32 Byte Granularity........................... - Disable(4 Bursts) [/color] ========== Prime95 + 3dMark2001SE + CPU-Z + Everest 2.20: 3dMark2003: 3dMark2005: 3dMark 2006: ========== short description: 334x09 @ 3006Mhz,1.35 114.4% 2.5-3-3-6 @ 2.71v vdimm Share this post Link to post Share on other sites More sharing options...
Hemidare Posted April 29, 2007 Posted April 29, 2007 DFI LANPARTY nF4 Expert(OCZ Tony's EX406BTA 04/06/2006) Opteron 64 144 CAB1E 0614 BPBW 2x1024MB OCZ PC3200EL (OCZ4001024ELPE) 2XBFG GeForce 7600GT OC SLI, 580/1450 93.81 drivers 36GB Western Digital Raptor 10,000RPM SATA hdd LG DVDRAM GSA-4163B NeoPower 480 Watt ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 334 LDT/FSB Frequency Ratio....................... - X 3.0 CPU/FSB Frequency Ratio....................... - X 9.0 PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - Auto CPU VID Control............................... - 1.350 CPU VID Special Control....................... - 114.4% LDT Voltage Control........................... - 1.20v Chip Set Voltage Control...................... - 1.52v DRAM Voltage Control.......................... - 2.71v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 150=RAM/FSB:03/04 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 2.5 RAS# to CAS# delay (Trcd)..................... - 3 Min RAS# active time (Tras)................... - 6 Row precharge time (Trp)...................... - 3 Row Cycle time (Trc).......................... - 12 Bus Clocks Row refresh cyc time (Trfc)................... - 14 Bus Clocks Row to Row delay (Trrd)....................... - 02 Bus Clocks Write recovery time (Twr)..................... - 02 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 02 Bus Clocks Refresh Period (Tref)......................... - 3120 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - Auto DRAM Data Drive Strength...................... - Auto Max Async Latency............................. - 8.0 Nano Seconds DRAM Response Time............................ - Fastest Read Preamble Time............................ - 5.0 Nano Seconds IdleCycle Limit............................... - 256 Cycles Dynamic Counter............................... - Enable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 04 x 32 Byte Granularity........................... - Disable(4 Bursts) [/color] ========== SP2004 + 3dMark2001SE + CPU-Z + Everest 2007 Ultimate: 3dMark2003: 3dMark2005: 3dMark 2006: ========== short description: 334x09 @ 3006Mhz,1.35 Vlts + 114.4% 2.5-3-3-6 @ 2.71v vdimm Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now