Jump to content
Sign in to follow this  
Angry_Games

Socket 939 Overclocking Database

Recommended Posts

DFI LANPARTY nF4 Ultra-D - 5/10/2005-2 BIOS

 

AMD Athlon 64 3200+ Venice Integrated into Chip FSB Socket 939 Processor Model ADA3200BPBOX - Retail - LBBLE 0516

 

OCZ EL Platinum Revision 2 1GB (2 x 512MB) 184-Pin DDR SDRAM Unbuffered DDR 400 (PC 3200) Dual Channel Kit System Memory - Retail

 

Gigabyte GV-NX66128DP GeForce 6600GT Turbo Force Edition PCI Express 128MB DDR Video Card, 73.00 drivers - 500/1120

 

Seagate Barracuda 7200.7 ST3160023A-RK 160GB 7200 RPM 8MB Cache IDE Ultra ATA100 Hard Drive

 

Western Digital Caviar 120GB 3.5" IDE Ultra ATA100 Hard Drive

 

NEC Black IDE DVD Burner

 

Super Flower / TTGI PLUG-N Power 450W Modular Power Supply

 

Thermalright XP-90 aluminum heatpipe heatsink + THERMALTAKE A2218 92MM UFO SERIES LED FAN - BLUE 26.8/81.2CFM 17/47DBA

 

 

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 250

LDT/FSB Frequency Ration - 4

CPU/FSB Frequency Ratio - x 10.0

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.375

 

CPU VID Control - 1.375v

CPU VID Special Control - Avove VID * 110%

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.60v

DRAM Voltage Control - 2.70v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200 (DRAM/FSB:1/01)

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2.5

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 07 Bus Clocks

Row precharge time (Trp) - 03 Bus Clocks

Row Cycle time (Trc) - 07 Bus Clocks

Row refresh cyc time (Trfc) - 14 Bus Clocks

Row to Row delay (Trrd) - 03 Bus Clocks

Write recovery time (Twr) - 03 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 3120 Cycles

Write CAS Latency (Twcl) - 01

DRAM Bank Interleave - Enabled

 

 

 

DQS Skew Control - Increase

DQS Skew Value - 0

DRAM Drive Strength - Level 5

DRAM Data Drive Strength - Level 1

Max Async Latency - 07.0 ns

DRAM Response Time - Fast *** May only be 5/10 BIOS ? ***

Read Preamble Time - 05.0 ns

IdleCycle Limit - 16 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(8 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.26 :

 

http://www4.ncsu.edu/unity/users/j/jbdeese.../OCDB/prime.JPG

 

 

3dMark2003:

 

3Dmark03(2500MHz).JPG

 

 

3dMark2005:

 

3Dmark05(2500Mhz).JPG

 

 

Aquamark 3d:

 

Aquamark(2500MHz).JPG

 

Everest:

 

http://www4.ncsu.edu/unity/users/j/jbdeese...CDB/Everest.JPG

 

 

==========

 

 

 

short description:

250x10 @ 2500Mhz, 1.375v + 110%

2.5-4-3-7 @ 2.7v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D 5/10/2 Fixed

 

AMD Athlon 64 4000+ San Diego Socket 939 Processor CABGE 0515 VPMW stepping

 

2x512MB OCZ VX PC3200

 

Asus EAX850XTPE Cat 5.8 drivers - 565/590

 

2x Western Digital Raptor WD360GD 36.7GB 10,000 RPM Serial ATA150 Hard Drive (RAID-0)

 

OCZ Modstream 520w 24-pin ATX power supply

 

Mach II Standard

 

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 250

LDT/FSB Frequency Ration - 4

CPU/FSB Frequency Ratio - 12

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.45v

 

CPU VID Control - 1.45v

CPU VID Special Control - Avove VID * 113%

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.50v

DRAM Voltage Control - 3.50v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200 (DRAM/FSB:1/01)

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2.0

RAS# to CAS# delay (Trcd) - 02 Bus Clocks

Min RAS# active time (Tras) - 05 Bus Clocks

Row precharge time (Trp) - 02 Bus Clocks

Row Cycle time (Trc) - 07 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 01 Bus Clocks

Read to Write delay (Trwt) - 02 Bus Clocks

Refresh Period (Tref) - 1168 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 8

DRAM Data Drive Strength - Auto

Max Async Latency - Auto

DRAM Response - Normal

Read Preamble Time - Auto

IdleCycle Limit - 16 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.30:

 

primecpuz2001.jpg

 

 

3dMark2003:

 

3D033Ghz.jpg

 

 

3dMark2005:

 

3D053Ghz.jpg

 

 

Aquamark 3d:

 

Aqua3000.jpg

 

 

Everest read:

 

Evread.jpg

 

==========

 

 

short description:

Daily settings

250x12 @ 3000Mhz, 1.425v + 113%

2-2-5-2 @ 3.5v vdimm

To play BF2 without crashing i have to clock down about 50 mhz using these settings.

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 SLI-D 5/10/2005 BIOS

 

AMD Athlon 64 3200+ Venice Socket 939 Processor Model ADA3200BPBOX - LBBLE 0518 stepping

 

2x512MB OCZ EL Platinum Revision 2

 

eVGA 256-P2-N376-AX Geforce 6800GT 256MB 256-bit GDDR3 PCI-Express x16 Video Card , 7.1.2.5 drivers - 409/1100

 

2x HITACHI Deskstar 7K80 HDS728080PLA380 -0A30356 80GB 7200 RPM 8MB Cache Serial ATA II Hard Drive (RAID-0)

 

PCP&Cooling Turbo-Cool 510 Express / SLI

 

THERMALTAKE CL-P0114 120mm Cooling Fan/Heatsink (Big Typhoon

 

*

*

 

 

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 278

LDT/FSB Frequency Ration - 3

CPU/FSB Frequency Ratio - 16 16

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - StartUp

 

CPU VID Control - 1.300v

CPU VID Special Control - Avove VID * 126%

LDT Voltage Control - 1.30v

Chip Set Voltage Control - 1.70v

DRAM Voltage Control - 2.8v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200 (DRAM/FSB:1/01)

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2.5

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 03 Bus Clocks

Row Cycle time (Trc) - 08 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 03 Bus Clocks

Write recovery time (Twr) - 03 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 4708 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

 

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 7

DRAM Data Drive Strength - Level 2

Max Async Latency - 7.0

Read Preamble Time - Auto

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(8 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.29 :

 

http://i11.photobucket.com/albums/a161/mal.../OCDBstable.jpg

 

3dMark2003:

 

3dmark03.jpg

 

 

3dMark2005:

 

3dmark05.jpg

 

Aquamark 3d:

 

 

aqua3.jpg

 

Everest Read:

 

everreadbest.jpg

 

==========

 

 

 

short description:

278 X 9 @ 2502 Mhz, 1.3v + 126%

2.5-4-8-3 @ 2.8v vdimm

Share this post


Link to post
Share on other sites
Guest coldcase

DFI LANPARTY nF4 ULTRA D - 5/10-2 BIOS

 

AMD Athlon 64 3700+ San Diego Socket 939 Processor Model ADA3700DAA5BN - CABGE 0515SPMW stepping

 

2x512MB OCZ PC3200 Plat. Rev2 TCC5

 

1x XFX Geforce 6600GT 128MB 128-bit GDDR3 PCI-Express x16 Video Card

 

1x Western Digital SATA 200G HD

 

1x Western Digital ATA 200G HD

 

LG Black IDE DVD-ROM Drive

 

NEC 3500A Black IDE Burner Drive

 

OCZ Powerstream 520w 24-pin ATX power supply

 

Custom Watercooled

 

*

*

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 290

LDT/FSB Frequency Ration - 3X

CPU/FSB Frequency Ratio - 10X

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.500V

 

CPU VID Control - 1.325v

CPU VID Special Control - Avove VID * 123%

LDT Voltage Control - 1.30v

Chip Set Voltage Control - 1.70v

DRAM Voltage Control - 2.90v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200 (DRAM/FSB:1/01)

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2.5

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 04 Bus Clocks

Row Cycle time (Trc) - 08 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 02 Bus Clocks

Refresh Period (Tref) - 4708 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

 

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 7

DRAM Data Drive Strength - Level 2

Max Async Latency - 7.0ns

DRAM Response Time - Fast

Read Preamble Time - Auto

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(8 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.26 + Everest 1.51:

 

bench_pic1.jpg

 

 

3dMark2003:

 

bench_pic2.jpg

 

 

3dMark2005:

 

bench_pic3.jpg

 

 

Aquamark 3d:

 

bench_pic4.jpg

 

 

==========

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra D NF44 SLI-DR - 3/10/2005 BIOS (DFI official bios)

 

http://www.overclock.co.uk/customer/produc...productid=18208AMD Athlon 64 3200+ Winchester Socket 939 Processor Model ADA3200DIK4BI - ???? 0432 stepping[/url]

 

2x512MB Crucial Ballistix DDR500

 

x800 256MB 256-bit GDDR3 PCI-Express x16 Video , Omega drivers2.6.25a - 443core 544(1088)memory

 

Seagate SERIAL SATA Barracuda 7200.7 200Gb 1.5Gb/s[/url]

 

 

Tagan TG480-U01 480W ATX Silent PSU Retail Boxed

 

Asetek WaterChill Antarctica KT12A-L30 CPU/VGA/Chipset TRIPLE RAD POWER KIT 10mm + 2x Akasa Ultra Quiet Amber Series 120mm Fan

 

*

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 260

LDT/FSB Frequency Ration - 16 -16

CPU/FSB Frequency Ratio - x10

PCI eXpress Frequency - 105Mhz

 

CPU VID StartUp Value - 1.55

 

CPU VID Control - 1.475v

CPU VID Special Control - Avove VID * 110%

LDT Voltage Control - 1.40v

Chip Set Voltage Control - 1.70v

DRAM Voltage Control - 2.90v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200 (DRAM/FSB:1/01)

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2.5

RAS# to CAS# delay (Trcd) - 03 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 03 Bus Clocks

Row Cycle time (Trc) - 07 Bus Clocks

Row refresh cyc time (Trfc) - 12 Bus Clocks

Row to Row delay (Trrd) - 01 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 01 Bus Clocks

Read to Write delay (Trwt) - 02 Bus Clocks

Refresh Period (Tref) - 0388 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

 

 

DQS Skew Control - Decrease skew

DQS Skew Value - 10

DRAM Drive Strength - Level 8

DRAM Data Drive Strength - Level 4

Max Async Latency - 07.0

Read Preamble Time - Auto

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(8 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.26

 

http://img284.echo.cx/my.php?image=prim951jo.jpg

 

 

3dMark2003:

 

3dmak036fj.jpg

 

 

3dMark2005:

 

3dmark051bo.jpg

 

 

Aquamark 3d:

 

aquamark4ny.jpg

 

Everest 1.51

http://img301.imageshack.us/my.php?image=everest3yv.jpg

 

short description:

260x10 @ 2600Mhz, 1.475v + 110%

2.5-3-3-8 @ 2.9v vdimm

 

3dmark 05 much improved with latest omega drivers (2.6.42) = 4801 3d marks

Better late than never. This is a day in day out setup that's been stable for months.

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D - 6/23/2005-2 BIOS

 

AMD Athlon 64 FX55 ClawHammer Socket 939 Processor ADAFX55DEI5AS CAA2C 0512VPMW 1228662C50142

 

2x512MB OCZ EL DDR PC4000 Dual Channel Gold VX

 

XFX PVT18LQT Geforce4 MX4000 64MB DDR AGP 4X/8X Video Card

 

1x Western Digital Raptor WD740GD 74GB 10,000 RPM 8MB Cache Serial ATA150 Hard Drive

 

NEC 16X DVD+R 8X DVD+RW 4X DVD+R DL 16X DVD-R 6X DVD-RW 16X DVD-ROM 48X CD-R 24X CD-RW 48X CD-ROM 2M Cache IDE DVD Burner

 

Antec TRUEPOWERII TPII-550 ATX12V 550W Power Supply

 

DIY External Dual-Core Dual-120mm 1.25 gallon W/C System

 

==== Bios Information ======

 

Genie BIOS Settings:

FSB Bus Frequency - 246

LDT/FSB Frequency Ration - 4

CPU/FSB Frequency Ratio - 11

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.5

 

CPU VID Control - 1.325v

CPU VID Special Control - Above VID * 113%

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.50v

DRAM Voltage Control - 3.3v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200 (DRAM/FSB:1/01)

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 1.5

RAS# to CAS# delay (Trcd) - 02 Bus Clocks

Min RAS# active time (Tras) - 05 Bus Clocks

Row precharge time (Trp) - 02 Bus Clocks

Row Cycle time (Trc) - 07 Bus Clocks

Row refresh cyc time (Trfc) - 15 Bus Clocks

Row to Row delay (Trrd) - 0 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 01 Bus Clocks

Read to Write delay (Trwt) - 02 Bus Clocks

Refresh Period (Tref) - 3072 Cycles

Write CAS Latency (Twcl) - 1

DRAM Bank Interleave - Enabled

 

DQS Skew Control - increase

DQS Skew Value - 128

DRAM Drive Strength - Level 6

DRAM Data Drive Strength - Level 2

Max Async Latency - 7

Response time - Fastest

Read Preamble Time - 5

IdleCycle Limit - 16 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 8 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

=====Prime95, 3dMark2001SE, CPU-Z=====

 

http://i5.photobucket.com/albums/y192/Timp...PrimeStable.png

 

=====3dMark03, SuperPi 32meg, Everest write=====

 

http://i5.photobucket.com/albums/y192/Timp...mark03Final.png

 

=====3dMark05, Everest read=====

 

3dmark05Final.png

 

=====aquaMark3, occt, S&M=====

 

aquamark3Final.png

 

=====short description=====

 

246x11 @ 2706Mhz, 1.325v + 113%

1.5-2-2-5 @ 3.38v vdimm

 

** If the pics are bigger then 800600 you need to use the [bimg] tags.. !!!!!!!!!!! Thanks THunDA..

Share this post


Link to post
Share on other sites

Short description:

260x10 @ 2600Mhz, 1.250v + 126%

2-2-5-2 @ 3.5v vdimm

BIOS VERSION = 3-10

 

DFI LANPARTY nF4 SLi-DR

 

AMD Athlon 64 3200+ Venice OEM (0516 EPGW)

 

BFG Geforce 6800GT 256MB GDDR3 PCI-Express x16 (stock clocks)

 

OCZ 520W Powerstream

 

OCZ 1GB (2 x 512MB) 184-Pin DDR SDRAM DDR 500 (PC 4000) Unbuffered Dual Channel Kit System Memory Model OCZ5001024ELDCGEVX-K

 

Lian Li PC 6099B

 

Thermalright XP90c + Panaflo 92mm High Speed

 

 

-===========================-

 

 

Genie BIOS Settings:

FSB Bus Frequency - 260

LDT/FSB Frequency Ratio - 4

CPU/FSB Frequency Ratio - X 10.0

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - StartUp

 

CPU VID Control - 1.250v

CPU VID Special Control - Avove VID * 126%

LDT Voltage Control - 1.40v

Chip Set Voltage Control - 1.70v

DRAM Voltage Control - 3.50v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200 (DRAM/FSB:1/01)

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 1.5

RAS# to CAS# delay (Trcd) - 02 Bus Clocks

Min RAS# active time (Tras) - 05 Bus Clocks

Row precharge time (Trp) - 02 Bus Clocks

Row Cycle time (Trc) - 07 Bus Clocks

Row refresh cyc time (Trfc) - 15 Bus Clocks

Row to Row delay (Trrd) - 00 Bus Clocks

Write recovery time (Twr) - 03 Bus Clocks

Write to Read delay (Twtr) - 01 Bus Clocks

Read to Write delay (Trwt) - 01 Bus Clocks

Refresh Period (Tref) - Auto

Write CAS Latency (Twcl) - 01

DRAM Bank Interleave - Enabled

 

 

 

DQS Skew Control - Increase

DQS Skew Value - 255

DRAM Drive Strength - Level 5

DRAM Data Drive Strength - Level 2

Max Async Latency - 7 ns

Read Preamble Time - 5.5 ns

IdleCycle Limit - 32 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 8 x

Bypass Max - 07 x

32 Byte Granularity - Disable(8 Bursts)

 

 

-===========================-

 

Prime95 + 3dMark2001SE + CPU-Z + Everest:

 

http://img343.imageshack.us/img343/8364/260010gn.jpg

 

3dMark2003:

 

http://img343.imageshack.us/img343/9959/260028zm.jpg

 

3dMark2005:

 

http://img343.imageshack.us/my.php?image=260042ex.jpg

 

Aquamark 3d:

 

http://img343.imageshack.us/my.php?image=260030og.jpg

 

For searching: 3200 venice ocz vx 4000

 

EDIT: Adding BFG 7800 GTX (at stock out of the box clocks) Scores with SAME timings/speed as above.

 

3dMark2001 SE:

http://img349.imageshack.us/img349/296/26007800017yc.jpg

 

3dMark2003:

http://img349.imageshack.us/my.php?image=26007800032nd.jpg

 

3dMark2005:

http://img349.imageshack.us/my.php?image=26007800059hl.jpg

 

Aquamark 3d:

http://img349.imageshack.us/my.php?image=26007800aq4kp.jpg

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D - 6/23-2 BIOS , IOSS Bios Savior RD1-PMC4

 

AMD 64 4000 (IHS Removed) Sandiego Socket 939 Processor Model ADA4000BNBOX - 0515 stepping week

 

OCZ PC3200rev2 4x512mb = 2048mb's TCC5

 

Powercolor X850Xt vgpu + vdd mods , ZALMAN VF700-CU 2 Ball VGA COOLER.. Official Cat 5.7's 580-621

 

2x Western Digital Raptor WD360GD 36.7GB 10,000 RPM Serial ATA150 Hard Drive (RAID-0) 16k-16k

 

Maxtor DiamondMax 10 120GB 3.5" Serial ATA150 Hard Drive

 

Asus CRW-5224A CD-RW burner

 

OCZ 600watt PowerStream PSU

 

Thermalright SLK948 heatsink , VANTEC TD9238H 92mm 2 Ball Cooling Fan

 

COOLER MASTER CM Stacker STC-T01-UW Black/ Silver Computer Case

 

COOLER MASTER ALD-V03-UK Black Digital function panel

 

4x YS-TECH 120X25MM 4-PIN CASE FAN 105.0CFM 45.0DBA

 

*

*

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 264

LDT/FSB Frequency Ration - Auto

CPU/FSB Frequency Ratio - 11

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.55v

 

CPU VID Control - 1.325v

CPU VID Special Control - Avove VID * 126%

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.60v

DRAM Voltage Control - 2.90v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200 (DRAM/FSB:1/01)

Command Per Clock (CPC) - Disable

CAS Latency Control (Tcl) - 2.5

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 03 Bus Clocks

Row Cycle time (Trc) - 09 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 01 Bus Clocks

Read to Write delay (Trwt) - 02 Bus Clocks

Refresh Period (Tref) - 3120 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

 

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 7

DRAM Data Drive Strength - Level 2

Max Async Latency - 8

DRAM Response Time - Fast

Read Preamble Time - 5.5

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(8 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + 2x CPU-Z + MBM + A64Tweaker + RivaTuner vid clocks :

 

ocdb14mj.jpg

 

 

3dMark2003 + Everest + SuperPi 32m + MBM :

 

ocdb22cf.jpg

 

 

3dMark2005 :

 

ocdb37ix.jpg

 

 

Aquamark 3d:

 

ocdb42vk.jpg

 

 

==========

 

short description:

264x11 @ 2904Mhz, 1.325v + 126%

4x512mb's @ 2.5-4-8-3 @ 2.9v vdimm

Share this post


Link to post
Share on other sites

DFI LanParty NF4 SLI-DR (6/23-2 BIOS)

AMD Athlon64 Winchester 3200+ socket 939

2x1024MB OCZ PC3200 Platinum OCZ4002048ELDCPE-K

Nvidia 6800GT PCI-Express 384/1071, 76.41 drivers

WD Raptor 36GB 10,000RPM SATA hdd

Asus 52x Quietdrive CD-ROM

OCZ 600w Powerstream psu

DangerDen TDX watercooling

 

*

*

2gb_3200_220x10-7.jpg

 

2gb_3200_220x10-7a.jpg

 

2gb_3200_220x10-8.jpg

 

2gb_3200_220x10-8a.jpg

 

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 220

LDT/FSB Frequency Ration - Auto

CPU/FSB Frequency Ratio - 10

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.500v

 

CPU VID Control - 1.300v

CPU VID Special Control - Avove VID * 110%

LDT Voltage Control - 1.40v

Chip Set Voltage Control - 1.70v

DRAM Voltage Control - 2.80v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200 (DRAM/FSB:1/01)

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2.5

RAS# to CAS# delay (Trcd) - 03 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 03 Bus Clocks

Row Cycle time (Trc) - 13 Bus Clocks

Row refresh cyc time (Trfc) - 17 Bus Clocks

Row to Row delay (Trrd) - 03 Bus Clocks

Write recovery time (Twr) - 03 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - Auto

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

 

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Auto

DRAM Data Drive Strength - Level 2

Max Async Latency - 8.0 Nano Seconds

DRAM Response Time - Normal

Read Preamble Time - 6.0 Nano Seconds

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

Prime95 + 3dMark01 + Everest 2.01 + cpu-z

http://www.angrygames.com/ocdb/angry/2x1gb...00_220x10-1.jpg

 

2gb_3200_220x10-2.jpg

 

2gb_3200_220x10-3.jpg

 

2gb_3200_220x10-4.jpg

 

2gb_3200_220x10-5b.jpg

 

2gb_3200_220x10-5c.jpg

 

 

full prime load temps:

http://www.angrygames.com/ocdb/angry/2x1gb...00_220x10-6.jpg

 

 

==============

 

short description:

220x10 @ 2200Mhz, 1.300v + 110%

2x1024MB, 2.5-3-8-3 @ 2.8v vdimm

 

==============

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 SLI-DR - 6/23-2 BIOS

 

AMD Athlon 64 3000+ Venice Socket 939 Processor Model ADA3000BPBOX - LBBLE 0517 EPAW stepping

 

2x512MB OCZ EL Platinum revision 2 V1.1 TCC5 memory

 

Sapphire Radeon X850XT 256MB GDDR3 PCI-Express,ViVO,Dual DVI-ICATALYST 5.7 - 618/615

 

2x Samsung SpinPoint P80SD 80GB SATA2 8MB 7200RPM NCQ (RAID-0)

 

Plextor PX-716A - DVD±RW

 

Silverstone ST65ZF 650W PSU SLI-Certified, Dual PCI-E, 20/24pin

 

Thermalright XP-120 aluminum heatpipe heatsink + Papst 4412FGML 120x120x25mm

 

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 300

LDT/FSB Frequency Ration - x3

CPU/FSB Frequency Ratio - x9

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.5000v

 

CPU VID Control - 1.300v

CPU VID Special Control - Avove VID * 123%

LDT Voltage Control - 1.30v

Chip Set Voltage Control - 1.70v

DRAM Voltage Control - 2.90v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200 (DRAM/FSB:1/01)

Command Per Clock (CPC) - Disable

CAS Latency Control (Tcl) - 2.5

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 04 Bus Clocks

Row Cycle time (Trc) - 12 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 03 Bus Clocks

Write recovery time (Twr) - 03 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 4708 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

 

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 7

DRAM Data Drive Strength - Level 2

Max Async Latency - 09.0 Nano Seconds

Read Preamble Time - 05.0 Nano Seconds

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.26 + Everest 1.51:

 

http://img297.imageshack.us/my.php?image=pic14jb.jpg

 

3dMark2003:

 

http://img297.imageshack.us/my.php?image=pic26kv.jpg

 

 

3dMark2005:

 

http://img297.imageshack.us/my.php?image=pic36bc.jpg

 

 

Aquamark 3d:

 

http://img345.imageshack.us/my.php?image=pic45mx.jpg

 

==========

 

 

 

short description:

300x9 @ 2700Mhz, 1.300v + 123%

2.5-4-8-4 @ 2.93v vdimm

Share this post


Link to post
Share on other sites

DFI Lanparty NF4 Ultra-D - 06/23-05 BIOS

 

Athlon 64 3700+ San Diego

 

2x512mb OCZ PC4000EL VX Gold

 

Nvidia GeForce 7800 GTX (Benches w/clocks @490/1300 default)

 

2X WD 74GB Raptors RAID-0

 

Plextor 716 DVD/CD

 

Enermax 600W SLI

 

Koolance EXOS-AL w/GPU L60 and CPU-300 Waterblocks

(Processor will actually do [email protected]+ async, but 250MHz FSB(HTT) only prime stable with VX)

 

 

==========

 

 

Genie BIOS Settings:

 

FSB Bus Frequency - 250

LDT/FSB Frequency Ratio - 4X

CPU/FSB Frequency Ratio - 11X

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.50V

 

CPU VID Control - 1.35V

CPU VID Special Control - Above VID * 123%

LDT Voltage Control - 1.30v

Chip Set Voltage Control - 1.50v

DRAM Voltage Control - 3.30v

 

 

DRAM Configuration Settings:

 

DRAM Frequency Set - 200 (DRAM/FSB:1/01)

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2.0

RAS# to CAS# delay (Trcd) - 02 Bus Clocks

Min RAS# active time (Tras) - 06 Bus Clocks

Row precharge time (Trp) - 02 Bus Clocks

Row Cycle time (Trc) - 07 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 03 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 02 Bus Clocks

Refresh Period (Tref) - 3120

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

 

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 8

DRAM Data Drive Strength - Level 2

Max Async Latency - 7ns

DRAM Response Time - Fastest

Read Preamble Time - Auto

IdleCycle Limit - 16 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

Prime95+3DMark01+CPU-Z 1.29 (Vcore is wrong it is 1.6V)

 

http://i22.photobucket.com/albums/b306/ana...PU_Mem_3D01.jpg

 

Everest Read:

http://i22.photobucket.com/albums/b306/ana...verest_Read.jpg

http://i22.photobucket.com/albums/b306/ana...verest_Read.jpg

 

Aquamark:

http://i22.photobucket.com/albums/b306/ana...13/Aquamark.jpg

 

3DMark05:

http://i22.photobucket.com/albums/b306/ana...13/3Dmark05.jpg

 

3DMark03

http://i22.photobucket.com/albums/b306/ana...13/3Dmark03.jpg

 

 

 

short description:

250x11 @ 2750Mhz, 1.350v + 123%

2-2-6-2 @ 3.3v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY UT nF4 SLI-DR NF4 SLI-DR - 6-23-05 official bios

 

AMD 64 3000+ OEM ADA3000DIK4BI - CBBID 0503 stepping

 

2X512 OCZ PC 4000 Dual Channel Kit System Memory - Retail- OCZ5001024ELDCGEVX-K - WINBOND UTT - 260 HTT @ 2-2-2-8 @ 3.4V

 

2X XFX PVT45GUDF3 Geforce 6800GT 256MB 256-bit GDDR3 PCI Express x16 Video Card , 77.72 drivers - 416/1.4

 

SAMSUNG SpinPoint P Series 40GB 3.5" IDE Ultra ATA133 Hard Drive

 

2x Western Digital Caviar SE WD1200JS 120GB 7200 RPM 8MB Cache Serial ATA II Hard Drive

 

LITE-ON Black IDE DVD-ROM Drive Model SOHD-16P9S Black

 

LITE-ON Black IDE CD Burner Model SOHR-5239V BK RT

 

ENERMAX All in One Noisetaker Series EG701AX-VE SFMA(24P) 600W Power Supply

 

Lian Li PC-V2000A Silver Computer Case

 

COOLING

 

Copper TDX Block for Athlon64 754/939/940

 

Black Ice Pro Radiator

 

Danger Den Dual 3 1/2" Floppy Bay Reservoir

 

Hydor L35

 

*

*

http://specter-sniper.275mb.com/rigs.htm

 

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 260

LDT/FSB Frequency Ration - 4

CPU/FSB Frequency Ratio - 9

PCI eXpress Frequency - 101Mhz

 

CPU VID StartUp Value - 1.525v

 

CPU VID Control - 1.450v

CPU VID Special Control - Avove VID * 110%

LDT Voltage Control - 1.30v

Chip Set Voltage Control - 1.60v

DRAM Voltage Control - 3.40v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200 (DRAM/FSB:1/01)

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2.0

RAS# to CAS# delay (Trcd) - 02 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 02 Bus Clocks

Row Cycle time (Trc) - 07 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 02 Bus Clocks

Refresh Period (Tref) - 3120 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

 

 

DQS Skew Control - Increase skew

DQS Skew Value - 0

DRAM Drive Strength - Level 8

DRAM Data Drive Strength - Level 3

Max Async Latency - 08.0 Nano Seconds

Read Preamble Time - Auto

IdleCycle Limit - 016 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

===============================

 

http://valid.x86-secret.com/show_oc.php?id=29016

 

Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest 2.01:

 

http://forums.ocmodshop.com/attach.aspx/230/p9501.jpg

 

3dMark2003:

 

http://forums.ocmodshop.com/attach.aspx/226/3d03.jpg

 

 

3dMark2005:

 

http://forums.ocmodshop.com/attach.aspx/227/3d05.jpg

 

 

Aquamark 3d:

 

http://forums.ocmodshop.com/attach.aspx/228/am3884.jpg

 

 

==========

 

 

 

short description:

260x9 @ 2340Mhz, 1.450v + 110%

2-2-8-2 @ 3.4v vdimm

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×