Jump to content
Sign in to follow this  
Angry_Games

Socket 939 Overclocking Database

Recommended Posts

DFI LANPARTY nF4 Ultra-D - 03/29/06

 

AMD Opteron 146 CACJE 0603FPMW

 

2x1GB Mushkin Black (uccc)

 

EVGA 7800GT 256MB, 506/1220

 

Maxtor 160GB IDE hdd

 

OCZ PowerStream OCZ520ADJ ATX 520W Power Supply

 

 

 

 

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 288

LDT/FSB Frequency Ratio - AUTO

CPU/FSB Frequency Ratio - 10

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - Auto

 

CPU VID Control - 1.425

CPU VID Special Control - 104%

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.50v

DRAM Voltage Control - 2.50v

 

DRAM Configuration Settings:

DRAM Frequency Set - 180=RAM/FSB:09/10

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 3.0

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 03 Bus Clocks

Row Cycle time (Trc) - 11 Bus Clocks

Row refresh cyc time (Trfc) - 15 Bus Clocks

Row to Row delay (Trrd) - 01 Bus Clocks

Write recovery time (Twr) - 03 Bus Clocks

Write to Read delay (Twtr) - 01 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - Auto

Write CAS Latency (Twcl) - 1

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Increase Skew

DQS Skew Value - 32

DRAM Drive Strength - Auto

DRAM Data Drive Strength - Auto

Max Async Latency - 10

DRAM Response Time - Fast

Read Preamble Time - 8.0 Nano Seconds

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 06 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z

 

prime953dmark20018vv.th.jpg

 

 

3dMark2003:

 

3dmark0320947zn.jpg

 

 

3dMark2005:

 

3dmark059vw.jpg

 

 

Everest:

 

everestmemread9jo.th.jpg

 

 

OCCT CPU core temp graph (fans on low):

 

occtcoretemps3zm.jpg

 

 

short description:

288x10 @ 2880Mhz, 1.425vid x 104%

3.0-4-8-3 @ 2.5v vdimm

Share this post


Link to post
Share on other sites

DFI Lanparty SLI-D - Bios 11/14/05

 

Opteron 144 CAB2E 0546UPMW

 

2x1024 Crucial Ballistix z503's (Orange Slots)

 

Power Color x850xt STOCK w/6.3cats

 

2x 74gig Raptor Raid0

 

NEC 3550a DVD drive

 

OCZ 600w Power Stream SLI Edition

 

DangerDen = TDX + Maze4 + BIX2 + DDC-12v + 38 tubing

 

*

*

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 300

LDT/FSB Frequency Ratio - 3

CPU/FSB Frequency Ratio - 9

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.45v

 

CPU VID Control - 1.45v

CPU VID Special Control - 110%

LDT Voltage Control - 1.3v

Chip Set Voltage Control - 1.6v

DRAM Voltage Control - 2.6v

 

DRAM Configuration Settings:

DRAM Frequency Set - 180 (9:10)

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 3

RAS# to CAS# delay (Trcd) - 3 Bus Clocks

Min RAS# active time (Tras) - 8 Bus Clocks

Row precharge time (Trp) - 3 Bus Clocks

Row Cycle time (Trc) - 9 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 3 Bus Clocks

Write recovery time (Twr) - 3 Bus Clocks

Write to Read delay (Twtr) - 2 Bus Clocks

Read to Write delay (Trwt) - 3 Bus Clocks

Refresh Period (Tref) - Auto

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Auto

DRAM Data Drive Strength - Auto

Max Async Latency - Auto

DRAM Response Time - Normal

Read Preamble Time - Auto

IdleCycle Limit - 256 Cycles

Dynamic Counter - disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

 

==========

 

 

Prime95 + 3dMark2001SE + 2x CPU-Z + MBM + a64tweaker :

 

ocdb1medium8sz.jpg

 

 

3dMark2003 + Everest Reads + MBM + 2x CPU-Z :

 

ocdb2medium1gb.jpg

 

 

3dMark2005 + Everest Writes + MBM + 2x CPU-Z :

 

ocdb3medium8nn.jpg

 

3dMark2006 + Everest Latency + MBM + 2x CPU-Z :

 

ocdb4medium1qk.jpg

 

==========

 

 

 

 

short description:

300x9=2700mhz

3-3-8-3-9-16 2.6vdimm @ 270mhz

Share this post


Link to post
Share on other sites

LanParty NF4 Ultra D - BIOS 704-2BTA

 

AMD Opteron 150 Venus

 

2GB (2X512 Patriot 3200+XBLK tccd plus 2X512 Geil One tccd)

 

XFX 7900GTX 512MB - 665/1630 84.25 beta drivers

 

Hitachi Deskstar 80gb SATA II X2 RAID 0 (8MB cache)

 

NEC ND-3520A DVD-RRW

 

Enermax EG701AX-VE SFMA 600W

 

Thermalright XP-90 HS

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 264

LDT/FSB Frequency Ratio - X 4.0

CPU/FSB Frequency Ratio - X 11.0

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - Startup

 

CPU VID Control - 1.400v

CPU VID Special Control - Above VID * 113%

LDT Voltage Control - 1.30v

Chip Set Voltage Control - 1.60v

DRAM Voltage Control - 2.80v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200=RAM/FSB:01/01

Command Per Clock (CPC) - Disable

CAS Latency Control (Tcl) - 2.5

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 07 Bus Clocks

Row precharge time (Trp) - 03 Bus Clocks

Row Cycle time (Trc) - 12 Bus Clocks

Row refresh cyc time (Trfc) - 24 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 02 Bus Clocks

Refresh Period (Tref) - 3120 Cycles

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Weak 4

DRAM Data Drive Strength - Auto

Max Async Latency - 8.0 Nano Seconds

DRAM Response Time - Fast

Read Preamble Time - 6.0 Nano Seconds

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 04 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest 2.01:

 

264x11p95cpuz3dmeverest326062r.th.jpg

 

3dMark2003:

 

264x113dm035rq.th.jpg

 

3dMark2005:

 

264x113dm051up.th.jpg

 

3dmark 2006:

 

264x113dm067yn.th.jpg

 

Aquamark 3d:

 

264x11am38sr.th.jpg

 

Everest Read:

 

264x11read0ah.th.jpg

 

Everest Write:

 

264x11write3es.th.jpg

 

Everest Latency:

 

264x11latency6an.th.jpg

 

Sandra Bandwidth:

 

264x11bandwidth1ki.th.jpg

 

==========

 

 

 

short description:

264 X 11 @ 2904 Mhz, 1.400v + 113%

2.5-4-7-3 @ 2.80v vdimm

Share this post


Link to post
Share on other sites

Ohh... I hope I did this right. These are my best results at these settin's.

 

DFI LANPARTY nF4 Ultra-D - 7/04-2 BigToe BIOS

 

AMD Opteron 148 CACJE 0601

 

2x512MB OCZ Platinum limited editon DDR600 (tccd)

 

Evga 7900GT 256MB, 500/1500 83.91 drivers

 

1# Western-Digital Raptor2 74GB 10000rpms (8MB cache)

 

ASUS Black IDE DVD DL RAM Drive

 

OCZ PowerStream OCZ520ADJ SLI ATX 520W Power Supply - Retail

 

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 290

LDT/FSB Frequency Ratio - 3x

CPU/FSB Frequency Ratio - 10

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - Startup

 

CPU VID Control - 1.375v

CPU VID Special Control - Above VID * 113%

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.60v

DRAM Voltage Control - 2.6 +.003 (2.71 board sensor)v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200=RAM/FSB:10/10

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2.5

RAS# to CAS# delay (Trcd) - 03 Bus Clocks

Min RAS# active time (Tras) - 07 Bus Clocks

Row precharge time (Trp) - 03 Bus Clocks

Row Cycle time (Trc) - 07 Bus Clocks

Row refresh cyc time (Trfc) - 14 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 4196 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 7

DRAM Data Drive Strength - Level 2

Max Async Latency - 8.0 Nano Seconds

DRAM Response Time - Fast

Read Preamble Time - 5.0 Nano Seconds

IdleCycle Limit - 256 Cycles

Dynamic Counter - Enabled

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z v1.32 (Toaster Screenie):

 

ptcpu3dm011vs.th.jpg

 

 

3dMark2003:

 

3dm035tp.th.jpg

 

 

3dMark2005:

 

3dm054zj.th.jpg

 

3dmark2006:

 

3dm069gx.th.jpg

 

 

Aquamark 3d:

 

aqm7qs.th.jpg

 

Everest v220:

 

Reads:

 

er0wt.th.jpg

 

Writes:

 

ew2ui.th.jpg

 

Latencies:

 

el1dj.th.jpg

 

 

Best superpi's (W/these settin's)and A64 tweaker,Sandra-memory bench.:

 

sandramemorybenchanda64tweaker.th.jpg

 

 

 

 

 

 

 

==========

 

 

 

short description:

290x10 @ 2900Mhz, 1.375v + 113%(Normally 1.35*110) Needed more for prime only.

2.5-3-7-3 @Bios 2.60+.003 enabled Board sez 2.71v vdimm though. I think I got kinda' lucky on my sticks,and processor.

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D | 6/23-2 TMod BIOS

 

AMD Opteron 144 Venus CACJE 0603GPBW

 

2x1GB G Skill HZ DDR500 F1-4000USU2-2GBHZ (UCCC)

 

Connect3d x800GTO 256MB, 400/490 Cat 6.3 drivers

 

Western Digital SE 80GB SATA II HD (8MB cache)

 

Hitachi SE 80GB SATA II HD (8MB cache)

 

NEC 16X DVD±R DVD Burner ND-3550A

 

Solytech SL-D460EXP ATX12V 460W PSU

 

 

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 300

LDT/FSB Frequency Ratio - 3x

CPU/FSB Frequency Ratio - 9x

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - Startup

 

CPU VID Control - 1.125v

CPU VID Special Control - Above VID * 136%

LDT Voltage Control - 1.30v

Chip Set Voltage Control - 1.60v

DRAM Voltage Control - 2.60v

+0.03 vdimm - Disabled

 

DRAM Configuration Settings:

DRAM Frequency Set - 180=RAM/FSB:09/10

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 3

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 04 Bus Clocks

Row Cycle time (Trc) - 12 Bus Clocks

Row refresh cyc time (Trfc) - 14 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trtw) - 02 Bus Clocks

Refresh Period (Tref) - 0780 Cycles

Write CAS Latency (Twcl) - 01 Bus Clock

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 7

DRAM Data Drive Strength - Auto

Max Async Latency - 8.0 Nano Seconds

DRAM Response Time - Fast

Read Preamble Time - 6.0 Nano Seconds

IdleCycle Limit - 16 Cycles

Dynamic Counter - Enable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.32.1 + Everest Home (Memory Read):

 

cc9a5fbd889378f48a7f50aff31e176f.th.jpg

 

Prime95 + 3dMark03 + CPU-Z 1.32.1 + Everest Home (Memory Write):

 

4cb9db1313753231fcf7a8188d573195.th.jpg

 

Prime95 + 3dMark05 + CPU-Z 1.32.1 + Everest Home (Memory Latency):

 

99bf47dc82c3e0f2764d7867fc0afa4e.th.jpg

 

 

==========

 

 

 

300x9 @ 2700Mhz, 1.125v + 136%

3-4-4-8 @ 2.6v vdimm

 

 

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Expert (12/7/05 BIOS)

 

AMD Opteron 165 CCBWE 0551VPMW

 

2x1024 Crucial Ballistix Z503.16TD1 PC4000

 

BFG GeForce 7800GT OC, 81.95 driver

 

2x Maxtor DiamondMax10 SATA RAID0 striped

 

Lite On SOHW-1633S

 

PC P&C 510 ASL

 

DangerDen D4 Pump / Copper TDX Waterblock (lapped)

 

 

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 310

LDT/FSB Frequency Ratio - 3.0

CPU/FSB Frequency Ratio - 9.0

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - StartUp

 

CPU VID Control - 1.475v

CPU VID Special Control - Above VID * 112%

LDT Voltage Control - 1.40v

Chip Set Voltage Control - 1.68v

DRAM Voltage Control - 2.87v

 

DRAM Configuration Settings:

DRAM Frequency Set - 180=RAM/FSB:09/10

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 3

RAS# to CAS# delay (Trcd) - 3 Bus Clocks

Min RAS# active time (Tras) - 8 Bus Clocks

Row precharge time (Trp) - 3 Bus Clocks

Row Cycle time (Trc) - 09 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 03 Bus Clocks

Write recovery time (Twr) - 03 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - Auto

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Auto

DRAM Data Drive Strength - Auto

Max Async Latency - Auto

DRAM Response Time - Normal

Read Preamble Time - Auto

IdleCycle Limit - 016 Cycles

Dynamic Counter - Enable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.31

 

2Custom.jpg

 

3dMark2003:

 

mark03Custom.jpg

 

3dMark2005:

 

mark05Custom.jpg

 

 

Everest Read/Write/Latency

 

Ever1Custom.jpg

Ever2Custom.jpg

Ever3Custom.jpg

==========

 

 

 

short description:

310x9 @ 2790Mhz, 1.475v + 112%

3-3-8-3 @ 2.87v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D - 3/29

 

AMD Athlon64 x2 4200+ Manchester

 

2x1gB OCZ PC3200 GX XTC (Infineon)

 

MSI 7800GT 256MB, 465/1170 84.21 drivers

 

Maxtor 200GB SATA hdd (8MB cache)

 

Maxtor 40GB IDE hdd (2MB cache)

 

 

 

 

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 237

LDT/FSB Frequency Ratio - 4

CPU/FSB Frequency Ratio - 11

PCI eXpress Frequency - 105Mhz

 

CPU VID StartUp Value - Auto

 

CPU VID Control - 1.550v

CPU VID Special Control - Auto

LDT Voltage Control - 1.30v

Chip Set Voltage Control - 1.60v

DRAM Voltage Control - 2.50v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200=RAM/FSB:10/10

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 3

RAS# to CAS# delay (Trcd) - 03 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 02 Bus Clocks

Row Cycle time (Trc) - 10 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 01 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 3072 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 6

DRAM Data Drive Strength - Level 2

Max Async Latency - 8.0 Nano Seconds

DRAM Response Time - Normal

Read Preamble Time - 6.0 Nano Seconds

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

SP2004 + 3dMark2001SE + CPU-Z 1.33 + Everest 2.20:

 

classy lady.jpg

 

 

3dMark2001SE:

 

bitch1.jpg

 

 

3dMark2003:

 

bitch2.jpg

 

3dMark2005:

 

bitch3.jpg

 

 

==========

 

 

 

short description:

237x11 @ 2630Mhz, 1.550v

3-3-8-2 @ 2.5v vdimm

Share this post


Link to post
Share on other sites
Guest Synchronize

DFI LANPARTY nF4 SLI-D - 6/23/2005-3 BIOS (T-Mod)

 

Opteron 146 Venus Socket 939 CABYE 0540FPAW Stepping

 

2GB Corsair Twin-x 4000PT

 

2x Asus 7800GTX's 256mb 84.25 drivers Not WHQL (470/1301)

 

2xMaxtor Sata Diamond-max10 200GB (Raid-0)

 

HP DVD-/RW +/- 16x Lightscribe

 

Jeantech Arctic 600w PSU

 

Thermaltake VA8000SWA Armour (Silver)

 

Zalman CNPS9500 LED

 

 

*

*

*

*

 

==========

 

Genie BIOS Settings:

 

FSB Bus Frequency - 300

LDT/FSB Frequency Ratio - 3x

CPU/FSB Frequency Ratio - 10

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - Startup

 

CPU VID Control - 1.5

CPU VID Special Control - Above VID * 104%

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.60v

DRAM Voltage Control - 2.6 +

DRAM+.03v if it's not 3.2v - Enable

 

DRAM Configuration Settings:

 

DRAM Frequency Set - 166=RAM/FSB:5/06

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 3

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 04 Bus Clocks

Row Cycle time (Trc) - 07 Bus Clocks

Row refresh cyc time (Trfc) - Auto

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 3120 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Auto

DRAM Data Drive Strength - Auto

Max Async Latency - Auto

DRAM Response Time - Normal

Read Preamble Time - Auto

IdleCycle Limit - 256 Cycles

Dynamic Counter - Enabled

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

==========

 

Prime95(Small FFT's) + 3dMark2001SE + CPU-Z 1.32.1

 

http://i7.photobucket.com/albums/y271/sync.../OCDB-3GHZ2.jpg

 

SP2004(Blend) + 3dMark2001SE + CPU-Z 1.32.1

 

http://i7.photobucket.com/albums/y271/sync...B/OCDB-3GHZ.jpg

 

3DMARK03:

 

OCDB-3DMARK03.jpg

 

3DMARK05

 

OCDB-3DMARK05.jpg

 

Everest Read(1.51)

 

OCDB-EVEREST-READ.jpg

 

Everest Read(2.20)

 

OCDB-EVEREST-READV2.jpg

 

==========

 

 

short description:

300x10 @ 3000Mhz, 1.5v + 104%

3-4-8-4 @ 2.65v vdimm

Share this post


Link to post
Share on other sites

LANPARTY UT NF4 SLI-DR Venus - 03/07/06 BIOS

 

AMD Opteron 170

 

G.SKILL Extreme Series 2GB DDR 500 F1-4000USU2-2GBHZ

 

eVGA e-GeForce 6800 GS PCI Express, 500/1270 83.40 drivers

 

Maxtor Maxline III 7L300S0 300GB Serial ATA 1.5Gb 7200RPM Hard Drive w/16MB Buffer

 

Liteon SOHW-1693S 16X Dual Layer DVD±RW Drive (Black)

 

OCZ PowerStream OCZ520ADJSLI ATX, BTX, EPS12V 520W Power Supply

 

Swiftech STORM Extreme Performance Universal Water-block - Rev 2

 

Swiftech MCP655 Pump

 

Black Ice Pro III Triple 120mm Radiator With D12SL-12 YATE LOON 120mm Case Fans

 

Chipset Cooled By Evercool VC-RE VGA Cooler

 

Zalman VF700-CU VGA Cooler

 

 

 

 

 

[b]Genie BIOS Settings:[/b]

[color=navy]

FSB Bus Frequency..................... 295

LDT/FSB Frequency Ratio............... 3.0x

CPU/FSB Frequency Ratio............... 10x

PCI Express Frequency................. 100





CPU VID Startup Value................. 1.350

CPU VID Control....................... 1.450

VID Special Control................... 107.2%

LDT Voltage Control................... 1.20V

Chip Set Voltage Control.............. 1.52v

Dram Voltage Control.................. 2.56v[/color]







[b]DRAM Configuration Settings:[/b]

[color=darkgreen]

Dram Frequency Set (Mhz).............. 166=RAM/FSB:05/06

Command Per Clock (CPC)............... Enable

CAS# latency (Tcl).................... 3.0

RAS# to CAS# delay (Trcd)............. 04

Min RAS# active time (Tras)......... . 08

Row Precharge Time (Trp).............. 04

Row Cycle Time (Trc).................. 07

Row refresh timg (Trfc)............... 14

RAS# to RAS# delay (Trrd)............. 02

Write Recovery Time (Twr)............. 02

Wite-to-Read Delay (Twtr)............. 01

Read-to-Write Delay (Trwt)............ 03

Refresh Rate (Tref)................... 3684 Cycles

Write CAS Latency (Twcl)...............01

DRAM Bank Interleaving................ Enabled





DQS Skew Control...................... Auto

DQS Skew Value........................ 0

DRAM Drive Strength................... Level 05

DRAM Data Drive Strength.............. Level 1

Max Asynchronous Latency.............. 08.0

DRAM Response Time.....................Fastest

Read Preamble Time.................... 06.0

IdleCycle Limit........................256

Dynamic Counter....................... Enable

R/W Queue Bypass.......................16X

Bypass Max.............................07X

32-Byte Granularity................... Disable (4 bursts)

[/color]

 

 

 

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest 2.01:

 

2950prime5kx.th.png

 

 

3dMark2003:

 

2950036ui.th.png

 

 

3dMark2005:

 

2950055sj.th.png

 

 

3dMark2006:

 

2950067rk.th.png

 

 

Aquamark 3d:

 

2950aqua2dr.th.png

 

 

X3 Demo With Dual Super_Pi

 

2950x34dv.th.png

 

 

short description:

[email protected] 2950Mhz, 1.450v + 107.2%

3-4-4-8 @ 2.56v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D - 0329 Bios

 

AMD Opteron 170 CCBWE 0550UPMW on stock heatpipe cooler

 

2x256Mb + 2x512Mb Mushkin LII BH-5 (old school)

 

Connect3D X800GTO mod 16 pipelines, 560/1080 5.13 drivers

 

Samsung 80Gb ATA hdd (8MB cache)

 

Enermax 535w psu

 

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 260

LDT/FSB Frequency Ratio - 4

CPU/FSB Frequency Ratio - 10

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - Startup

 

CPU VID Control - 1.500v

CPU VID Special Control - AUTO

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.50v

DRAM Voltage Control - 3.60v

+0.03v - Disable

 

DRAM Configuration Settings:

DRAM Frequency Set - 200=RAM/FSB:1/1

Command Per Clock (CPC) - Disable

CAS Latency Control (Tcl) - 2.0

RAS# to CAS# delay (Trcd) - 02 Bus Clocks

Min RAS# active time (Tras) - 05 Bus Clocks

Row precharge time (Trp) - 02 Bus Clocks

Row Cycle time (Trc) - 07 Bus Clocks

Row refresh cyc time (Trfc) - 12 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 01 Bus Clocks

Read to Write delay (Trwt) - 02 Bus Clocks

Refresh Period (Tref) - 3120 Cycles

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - 7

DRAM Data Drive Strength - 2

Max Async Latency - 7ns

DRAM Response Time - Normal

Read Preamble Time - 5ns

IdleCycle Limit - 16 Cycles

Dynamic Counter - Enable

R/W Queue Bypass - 16 x

Bypass Max - 04 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Dual Prime95 + 3dMark2001SE (30277) + CPU-Z 1.32.1 :

 

http://img360.imageshack.us/img360/2105/du...1is302772yk.jpg

 

 

3dMark2003 (13955) + Everest 1.51 Memory Read (5105):

 

http://img360.imageshack.us/img360/2654/3d...treadis5105.jpg

 

 

3dMark2005 (6738) + Everest 1.51 Memory Write (2229):

 

http://img485.imageshack.us/img485/7360/3d...riteis22292.jpg

 

 

==========

 

 

 

short description:

260x10 @ 2600Mhz, 1.500v

2x256Mb + 2x512Mb @ 260MHz @ 2-2-5-2 @ 3.60v

Share this post


Link to post
Share on other sites

DFI RS482 INFINITY (3/21/2006 BIOS)

 

AMD Opteron 144 Venus 1MB L2

 

2x512MB PC3200 Mushkin LVL2 V2 (TCCD)

 

ATI x850XT PE 256mb, 540/590 6.3 drivers

 

250GB Seagate SATA hdd

 

NEC 3500A Silver IDE DVD-RW Drive

 

Antec TRUEPOWERII TPII-550 550W Power Supply

 

 

 

==========

 

[b]Genie BIOS Setting:[/b]

[color=red]

DLL Speed Override............................  -  Auto

DLL Speed.....................................  -  High



CPU/FSB Ratio Setting.........................  -  x9

CPU'n'NB Bus Ratio SEtting....................  -  x3 600 MHz

CPU Clock Setting.............................  -  300

O.C. Failed Control...........................  -  Disabled

DRAM Clock Setting............................  -  6/5

PCIE Clock Setting............................  -  100MHz



CPU Voltage Setting...........................  -  1.475v

DRAM Voltage Setting..........................  -  2.9v

NB and HT Voltage Setting.....................  -  1.3v

NB-SB Link Voltage Setting....................  -  1.9v



Auto Detect PCI Clk...........................  -  Enabled

Spread Spectrum...............................  -  Disabled

[/color]



[b]DRAM timing and Config:[/b]

[color=red]

CAS latency(tCL)..............................  -  2.5

Min RAS active time(tRAS).....................  -  8T

RAS to CAS delay(tRCD)........................  -  3T

Row precharge Time(tRP).......................  -  3T

Row to Row delay(tRRD)........................  -  2T

Row Cycle time(tRC)...........................  -  10T

Row refresh CYC Time(tRFC)....................  -  24T

Read to Write time(tRWT)......................  -  2T

Refresh Rate(tREF)............................  -  1560 Cycles

Write to Read Delay(tWTR).....................  -  2 Bus Clocks

Write recovery Time tWR)......................  -  2 Bus Clocks

1T/2T Memory Timing...........................  -  1T

Read Preamble value...........................  -  5.5ns

Async Latency value...........................  -  7ns

DRAM Drive Strength...........................  -  Weak

Dram Drive Strength Ratio.....................  -  x1.28

DRAM DQ Drive Strength........................  -  50 %

DQS Hysteresis................................  -  Disabled

Read and Write Queue Bypass...................  -  Auto

Dynamic Idle Cycle Counter....................  -  Enabled

Idle Cycle Limit..............................  -  16 Cycles

Bypass Max....................................  -  4 Times

Odd Divisor Correct...........................  -  Disabled

Dual DIMM.....................................  -  Auto

Disable Jitter................................  -  Auto

DRAM Bank Interleave..........................  -  Enabled

Burst Length..................................  -  8 beats

Enable AllDIMM slots clock....................  -  Enabled

MTRR mapping mode.............................  -  Continuous

PDL Delay Adjust..............................  -  Auto

[/color]



[b]System Bus Configuration:[/b]

[color=red]

HT Link Configuration.........................  -  Enabled

Upstream LDT Bus Width........................  -  16 bit

Downstream LDT Bus Width......................  -  16 bit

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.33:

 

http://img.photobucket.com/albums/v318/pharmd24/DFI/2.jpg

 

 

3dMark2003:

 

3DM03.jpg

 

 

3dMark2005:

 

3DM05.jpg

 

 

EverestMemory Read:

 

http://img.photobucket.com/albums/v318/pha...I/everestMR.jpg

 

 

 

 

==========

 

 

 

short description:

300x9 @ 2700Mhz, 1.475v

2.5-3-8-3 @ 2.9v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 SLI-DR -623-3 BIOS

 

AMD Opteron 170 CCB1E 0550VPMW

 

2x1024MB OCZ PC3200 Platinum

 

EVGA 7800GTX 256MB(water cooled,custom BIOS), 513/1400 81.98 drivers

 

Western Digital Raptor 74GB

 

Western Digital Caviar SE 250GB

 

Antec Truepower 2.0 Truecontrol II-550 ATX12V 550 watt PSU

 

Swiftech H20-220 Apex Extreme water cooling kit

 

 

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 285

LDT/FSB Frequency Ratio - x3

CPU/FSB Frequency Ratio - x10

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.425v

 

CPU VID Control - 1.425v

CPU VID Special Control - auto

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.50v

DRAM Voltage Control - 2.60v

 

DRAM Configuration Settings:

DRAM Frequency Set - 150=RAM/FSB:3/04

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2

RAS# to CAS# delay (Trcd) - 03 Bus Clocks

Min RAS# active time (Tras) - 05 Bus Clocks

Row precharge time (Trp) - 02 Bus Clocks

Row Cycle time (Trc) - 7 Bus Clocks

Row refresh cyc time (Trfc) - 10 Bus Clocks

Row to Row delay (Trrd) - 01 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 01 Bus Clocks

Read to Write delay (Trwt) - 01 Bus Clocks

Refresh Period (Tref) - 3120 Cycles

Write CAS Latency (Twcl) - 1 Bus Clocks

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Auto

DRAM Data Drive Strength - Auto

Max Async Latency - 9.0 Nano Seconds

DRAM Response Time - Normal

Read Preamble Time - 6.0 Nano Seconds

IdleCycle Limit - 256 Cycles

Dynamic Counter - Enable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest 2.01:

 

prime95_thumb.JPG

 

 

3dMark2003:

 

3dmark03.JPG

 

 

3dMark2005:

 

3dmark05.JPG

 

 

 

==========

 

 

 

short description:

285x10 @ 2850Mhz, 1.425v

2-3-5-2 @ 2.6v vdimm

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×