Jump to content
Sign in to follow this  
Angry_Games

Socket 939 Overclocking Database

Recommended Posts

DFI LANPARTY nF4 Ultra-D - N4D623-1 BIOS

 

 

AMD Athlon64 3200+ Venice E3 0538

 

2x1GB PC4000 G.Skill UCCC (F1-4000USU2-2GBHZ)

 

Asus Extreme N7800GT 256MB, 420/1020 81.98 drivers

 

HDD Seagate 200GB SATA150 (8MB cache)

 

Maxtor 40GB PATA 4D040H2 (2MB cache)

 

ASUS CD-S520/A IDE CD-ROM Drive

 

DVD+RW MSI DR16-B2 2X16X4X16

 

Antec TruePower 2.0 550W

 

 

 

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 260

LDT/FSB Frequency Ratio - AUTO

CPU/FSB Frequency Ratio - AUTO

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.350v

 

CPU VID Control - 1.325v

CPU VID Special Control - Above VID * 123%

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.50v

DRAM Voltage Control - 2.50v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200=RAM/FSB:01/1

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 3.0

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 07 Bus Clocks

Row precharge time (Trp) - 04 Bus Clocks

Row Cycle time (Trc) - 07 Bus Clocks

Row refresh cyc time (Trfc) - 13 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 01 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 3684 Cycles

Write CAS Latency (Twcl) - 1 clk

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Auto

DRAM Data Drive Strength - Auto

Max Async Latency - 7.0 Nano Seconds

DRAM Response Time - Normal

Read Preamble Time - 5.0 Nano Seconds

IdleCycle Limit - 256 Cycles

Dynamic Counter - Enable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.31:

 

http://img204.imageshack.us/img204/8779/prime13oz.jpg

 

 

3dMark2003:

 

3dmark0317bp.jpg

 

 

3dMark2005 + Everest 2.50.480:

 

3dmark0512uo.jpg

 

3DMark2006:

 

3dmark0610jt.jpg

 

 

==========

 

 

 

short description:

260x10 @ 2600Mhz, 1.325v + 123%

3-4-7-4 @ 2.5v vdimm

Share this post


Link to post
Share on other sites
Guest Dynamic

Genie BIOS Settings:

 

FSB Bus Frequency - 278

LDT/FSB Frequency Ration - Auto

CPU/FSB Frequency Ratio - x9.0

PCI eXpress Frequency - 100Mhz

CPU VID StartUp Value - 1.500v

CPU VID Control - 1.500v

CPU VID Special Control - Auto

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.50v

DRAM Voltage Control - 3.50v

 

DRAM Configuration Settings:

 

DRAM Frequency Set - 180 DRAM/FSB:09/10

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2.0

RAS# to CAS# delay (Trcd) - 02 Bus Clocks

Min RAS# active time (Tras) - 05 Bus Clocks

Row precharge time (Trp) - 02 Bus Clocks

Row Cycle time (Trc) - 07 Bus Clocks

Row refresh cyc time (Trfc) - 17 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 02 Bus Clocks

Refresh Period (Tref) - 3120 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Auto

DRAM Data Drive Strength - Auto

Max Async Latency - Auto

Read Preamble Time - Auto

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(8 Bursts)

 

Note: 1.8GHz @2.5GHz w/memory @250MHz DDR500 2252-1T 3.5v; I know she can do more, just need to be nice and gentle...

 

primestable8fp.th.jpg

superpi3lf.th.jpg

3dmark06score9rb.th.jpg

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D - 5/10-2Fix BIOS

 

AMD Athlon64 3200+ Venice

 

2x512MB Mushkin Redline pc3500 (CH-5)

 

eVGA 7800GTX KO 256MB, 505/1300 81.98 drivers

 

74gb Raptor SATA hdd

 

OCZ PowerStream OCZ520ADJ ATX 520W Power Supply - Retail

 

 

*

*

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 300

LDT/FSB Frequency Ratio - 3

CPU/FSB Frequency Ratio - 10

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.500v

 

CPU VID Control - 1.375v

CPU VID Special Control - Above VID * 133%

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.50v

DRAM Voltage Control - 3.30v

 

DRAM Configuration Settings:

DRAM Frequency Set - 150=RAM/FSB:3/4

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 02

RAS# to CAS# delay (Trcd) - 03 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 02 Bus Clocks

Row Cycle time (Trc) - 08 Bus Clocks

Row refresh cyc time (Trfc) - 17 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 01 Bus Clocks

Read to Write delay (Trwt) - 02 Bus Clocks

Refresh Period (Tref) - 1168 Cycles

Write CAS Latency (Twcl) - 01

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 8

DRAM Data Drive Strength - Auto

Max Async Latency - 7.0 Nano Seconds

DRAM Response Time - Normal

Read Preamble Time - 5.0 Nano Seconds

IdleCycle Limit - 016 Cycles

Dynamic Counter - Enable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest 2.01:

 

8hrprime5ng.jpg

 

 

3dMark2003:

 

3dmark030bg.jpg

 

 

3dMark2005:

 

3dmark051ys.jpg

 

 

3dMark2006:

 

3dmark062hf.jpg

 

 

Aquamark 3d:

 

aquamark33dn.jpg

 

 

==========

 

 

 

short description:

300x10 @ 3000Mhz, 1.375v + 133%

2-3-2-8 @ 3.3v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D - 6/23-3 BIOS

AMD Athlon64 3200+ Winchester

2x512MB OCZ ValueRam PC3200

eVGA 6600GT 128MB, 500/1000 81.98 drivers

200GB Western Digital SATA 2

80GB Hitachi 7200rpm DMA133

Plextor Black DVD+/-RW PX-712SA SATA

Samsung 16X DVDrom SD-616F

Athena Power 450W JGE-450PA power supply - Retail

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 240

LDT/FSB Frequency Ratio - x4

CPU/FSB Frequency Ratio - x10

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - Startup

 

CPU VID Control - 1.525v

CPU VID Special Control - Auto

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.50v

DRAM Voltage Control - 2.70v

 

DRAM Configuration Settings:

DRAM Frequency Set - 180=RAM/FSB:09/10

Command Per Clock (CPC) - Auto

CAS Latency Control (Tcl) - 2.5

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 04 Bus Clocks

Row Cycle time (Trc) - 07 Bus Clocks

Row refresh cyc time (Trfc) - Auto

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 3120 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Auto

DRAM Data Drive Strength - Auto

Max Async Latency - Auto

DRAM Response Time - Normal

Read Preamble Time - Auto

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

Image order:

1. Prime95 + 3dMark2001SE + CPU-Z 1.29

2. 3DMark03

3. 3DMark05

4. Everest 2.20

 

 

primecpuz5we.th.jpg

 

3dmark036jx.th.jpg

 

3dmark058zn.th.jpg

 

everest9dq.th.jpg

 

 

 

==========

 

 

short description:

CPU 240x10 @ 2400MHz, 1.525v + 0%

RAM 240x9/10 @ 216MHz, 2.5-4-8-4 2.7v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D - 5/10-2Fix BIOS

 

AMD Athlon64 3200+ Venice

 

2x512MB Mushkin Redline pc3500 (CH-5)

 

eVGA 7800GTX KO 256MB, 505/1300 81.98 drivers

 

74gb Raptor SATA hdd

 

OCZ PowerStream OCZ520ADJ ATX 520W Power Supply - Retail

 

Vapochill LS

 

 

*

*

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 300

LDT/FSB Frequency Ratio - 3

CPU/FSB Frequency Ratio - 10

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.500v

 

CPU VID Control - 1.375v

CPU VID Special Control - Above VID * 133%

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.50v

DRAM Voltage Control - 3.30v

 

DRAM Configuration Settings:

DRAM Frequency Set - 150=RAM/FSB:3/4

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 02

RAS# to CAS# delay (Trcd) - 03 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 02 Bus Clocks

Row Cycle time (Trc) - 08 Bus Clocks

Row refresh cyc time (Trfc) - 17 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 01 Bus Clocks

Read to Write delay (Trwt) - 02 Bus Clocks

Refresh Period (Tref) - 1168 Cycles

Write CAS Latency (Twcl) - 01

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 8

DRAM Data Drive Strength - Auto

Max Async Latency - 7.0 Nano Seconds

DRAM Response Time - Normal

Read Preamble Time - 5.0 Nano Seconds

IdleCycle Limit - 016 Cycles

Dynamic Counter - Enable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest 2.01:

 

http://img524.imageshack.us/img524/6932/prime7mf.jpg

 

 

3dMark2003:

 

3dmark030bg.jpg

 

 

3dMark2005:

 

3dmark051ys.jpg

 

 

3dMark2006:

 

3dmark062hf.jpg

 

 

Aquamark 3d:

 

aquamark33dn.jpg

 

 

==========

 

 

 

short description:

300x10 @ 3000Mhz, 1.375v + 133%

2-3-2-8 @ 250mhz, 3.3v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY SLI-DR Expert - E704-2BT Bigtoe Expert bios

 

AMD Opteron 170 dual core processor

 

OCZ EL DDR PC-4000 Gold GX XTC 2GB Dual Channel

 

Sapphire Radeon X1900XT 512MB @ factory speeds (not for long :D), 5.13 drivers from disk, new drivers won't work yet

2x250GB WD 16MB SATA HD

 

Koolance Exos2 Watercooling system

 

FSP Epsilon 700W power supply

 

Danger Den TDX block on CPU and Maze 4 low profile on GPU

 

 

 

 

 

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 275

LDT/FSB Frequency Ratio - AUTO

CPU/FSB Frequency Ratio - 10

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - Startup

 

CPU VID Control - 1.400v

CPU VID Special Control - Above VID * 102.4%

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.56v

DRAM Voltage Control - 2.71v

 

DRAM Configuration Settings:

DRAM Frequency Set - 180=RAM/FSB:09/10

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 3

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 3 Bus Clocks

Row Cycle time (Trc) - 11 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 03 Bus Clocks

Write recovery time (Twr) - 03 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 3120 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 7

DRAM Data Drive Strength - Level 2

Max Async Latency - 8.0 Nano Seconds

DRAM Response Time - Normal

Read Preamble Time - 6.0 Nano Seconds

IdleCycle Limit - 128 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 04 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest 2.01:

 

http://img.photobucket.com/albums/v330/jef...creenshot1a.jpg

 

 

3dMark2003:

 

3dmark03.jpg

 

 

3dMark2005:

 

3dmark05.jpg

 

 

Everest memory Write

memorywrite.jpg

 

Everest memory latency

memorylatency.jpg

 

short description:

275x10 - 2750 mhz @, 1.400v + 102.4%

3-4-8-3 @ 2.71v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY SLI-DR Expert - 11/25/05 Expert bios

 

AMD Opteron 170 dual core processor

 

OCZ EL DDR PC-4000 Gold GX XTC 2GB Dual Channel

 

2 X BFG 7800 GT OC 477/1.12 SLI

 

XP90 ULTRA HIGH SPEED DELTA 142 CFM

 

ENERMAX NOISETAKER 600W SLI CERTIFIED

 

 

 

FSB Bus Frequency - 275

LDT/FSB Frequency Ratio - AUTO

CPU/FSB Frequency Ratio - 10

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - Startup

 

CPU VID Control - 1.400v

CPU VID Special Control - Above VID * 107%

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.56v

DRAM Voltage Control - 2.71v

 

DRAM Configuration Settings:

 

DRAM Frequency Set - 180=RAM/FSB:09/10

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 3

RAS# to CAS# delay (Trcd) - 04 Bus Clocks

Min RAS# active time (Tras) - 08 Bus Clocks

Row precharge time (Trp) - 3 Bus Clocks

Row Cycle time (Trc) - 11 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 03 Bus Clocks

Write recovery time (Twr) - 03 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 3120 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 7

DRAM Data Drive Strength - Level 2

Max Async Latency - 8.0 Nano Seconds

DRAM Response Time - Normal

Read Preamble Time - 6.0 Nano Seconds

IdleCycle Limit - 128 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 04 x

32 Byte Granularity - Disable(4 Bursts)

 

=========

 

http://img480.imageshack.us/img480/8972/27...ithbench5nx.jpg

 

========

3DMARK03

 

http://img216.imageshack.us/img216/8185/3dmark03crop0ou.jpg

 

========

3DMARK05

 

http://img149.imageshack.us/img149/8594/3dmark05crop8zc.jpg

 

=======

EVEREST

 

http://img149.imageshack.us/img149/4188/ev...eadcrop26wv.jpg

 

=======

3DMARK06

 

http://img490.imageshack.us/img490/7910/3dmark06crop2dj.jpg

=======

aquamark

 

http://img142.imageshack.us/img142/1256/281x108um.jpg

Share this post


Link to post
Share on other sites

FX-60 ACB2E 0536 SPMW

 

DFI Lanparty UT nF4 Ultra-D (bios 11/14/2005)

FX-60 2.8 14x200 @ 1.40v

2x512 1GB Patriot PC4800

ATI X1900XT

4x100GB SATA Maxtor 8mb cache raid 0

Antec Neo HE 550w

 

 

Genie BIOS Settings:

FSB Bus Frequency - 200

LDT/FSB Frequency Ratio - AUTO

CPU/FSB Frequency Ratio - 14

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - StartUp

 

CPU VID Control - 1.400v

CPU VID Special Control - Auto

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.50v

DRAM Voltage Control - 2.60v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200=RAM/FSB:01/01

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2

RAS# to CAS# delay (Trcd) - 02 Bus Clocks

Min RAS# active time (Tras) - 05 Bus Clocks

Row precharge time (Trp) - 02 Bus Clocks

Row Cycle time (Trc) - 12 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 02 Bus Clocks

Write recovery time (Twr) - 02 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - Auto

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Auto

DRAM Data Drive Strength - Auto

Max Async Latency - Auto

DRAM Response Time - Fast

Read Preamble Time - Auto

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 04 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.31 + Everest 2.20:

 

2812tmb.jpg

 

 

 

3dMark2003:

 

3dmark03.jpg

 

 

3dMark2005:

 

3dmark05.jpg

 

 

 

==========

 

 

 

short description:

I know nothing special for an FX-60 and has a lot of head room but it runs on air and is cool, quiet and powerful. Picked it up used for just over the cost of a 4800+.

200x14 @ 2800Mhz, 1.400v

2-2-5-2 @ 2.60v vdimm

Share this post


Link to post
Share on other sites

DFI LanParty UT nF4 SLI-D - 3/10/05 BIOS

 

AMD Athlon64 3700+ San Diego

 

CORSAIR XMS 2GB (2 x 1GB) PC3200

 

eVGA 7800GT CO 256MB, 510/1200 81.98drivers

 

Western Digital Raptor WD360GD 36.7GB 10,000 RPM 8MB Cache

 

Seagate Barracuda 7200.7 ST380011A 80GB 7200 RPM 2MB Cache

 

Antec TRUEPOWERII TPII-480 BLUE ATX12V 480W Power Supply

 

 

 

*

*

*

*

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 255

LDT/FSB Frequency Ratio - x4.0

CPU/FSB Frequency Ratio - x11.0

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.425v

 

CPU VID Control - 1.425v

CPU VID Special Control - Above VID * 100%

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.50v

DRAM Voltage Control - 2.8v

 

DRAM Configuration Settings:

DRAM Frequency Set - 180=RAM/FSB:09/10

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2.5

RAS# to CAS# delay (Trcd) - 03 Bus Clocks

Min RAS# active time (Tras) - 07 Bus Clocks

Row precharge time (Trp) - 0. Bus Clocks

Row Cycle time (Trc) - 07 Bus Clocks

Row refresh cyc time (Trfc) - 14 Bus Clocks

Row to Row delay (Trrd) - 03 Bus Clocks

Write recovery time (Twr) - 03 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 3120 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 6

DRAM Data Drive Strength - Level 3

Max Async Latency - 7.0 Nano Seconds

DRAM Response Time - Fast

Read Preamble Time - 5.0 Nano Seconds

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.31

 

 

3dMark03

http://members.shaw.ca/dmcrae77/3dmark03.JPG

 

3DMark05

http://members.shaw.ca/dmcrae77/3dmark05.JPG

 

3DMark06

http://members.shaw.ca/dmcrae77/3dmark06.JPG

 

Aquamark3D

http://members.shaw.ca/dmcrae77/aquamark%2...oc'd%20vid2.JPG

 

Everest Memory Read

http://members.shaw.ca/dmcrae77/Everest%20Mem%20Read.JPG

 

 

==========

 

 

 

short description:

255x11 @ 2805Mhz, 1.425v

2.5-3-7-3 @ 2.8v vdimm

Share this post


Link to post
Share on other sites

DFI Lanparty UT nF4 Ultra-D (bios 5-10 fix1)

AMD Athlon 64 X2 3800 (CCBWE 0532 MPMW)

2x1024 G.Skill-HZ PC4000

Sapphire X800 GTO^2 (bios flashed & 4 pipes unlocked - 495/1080)

WD Caviar 160GB IDE

OCZ Modstream 450w

 

==========

Genie BIOS Settings:

FSB Bus Frequency - 250

LDT/FSB Frequency Ratio - 4

CPU/FSB Frequency Ratio - 10

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - StartUp

 

CPU VID Control - 1.450v

CPU VID Special Control - Abovex1.10

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.50v

DRAM Voltage Control - 2.60v

 

DRAM Configuration Settings:

DRAM Frequency Set - 200

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 3

RAS# to CAS# delay (Trcd) - 4 Bus Clocks

Min RAS# active time (Tras) - 8 Bus Clocks

Row precharge time (Trp) - 4 Bus Clocks

Row Cycle time (Trc) - 9 Bus Clocks

Row refresh cyc time (Trfc) - 16 Bus Clocks

Row to Row delay (Trrd) - 3 Bus Clocks

Write recovery time (Twr) - 3 Bus Clocks

Write to Read delay (Twtr) - 2 Bus Clocks

Read to Write delay (Trwt) - 3 Bus Clocks

Refresh Period (Tref) - Auto

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Auto

DRAM Data Drive Strength - Auto

Max Async Latency - 8

DRAM Response Time - Normal

Read Preamble Time - 5.5

IdleCycle Limit - 256 Cycles

Dynamic Counter - Enable

R/W Queue Bypass - 16 x

Bypass Max - 7x

32 Byte Granularity - Disable(4 Bursts)

==========

 

prime95cpuz4li.th.jpg

 

aquamark037ub.th.jpg everestmemoryread1ud.th.jpg everestmemorywrite5lc.th.jpg everestmemorylatency5ju.th.jpg

 

3dmark011nx.th.jpg 3dmark035iv.th.jpg 3dmark059md.th.jpg 3dmark066dl.th.jpg

 

==========

short description (x2 3800, g.skill 2x1024 - HZ, x800gto^2):

250x10 (1:1) @ 2500Mhz

1.45x1.1=1.595 vcore

3-4-4-8 @ 2.60v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D - 6/23-3 Official BIOS

 

AMD Athlon64 3000+ Winchester - CBBHD 0448 WPMW

 

2x1024MB OCZ EL Platinum OCZ4002048ELDCPE-K (orange slots)

 

ATI X800XL 256MB, 440/1080 5.11 CCP

 

Western Digital 80GB IDE hdd (8MB cache)

 

Western Digital 120GB IDE hdd (8MB cache)

 

Pioneer IDE DL DVD Burner Model DVR-108

 

OCZ PowerStream OCZ520ADJ ATX 520W Power Supply

 

Thermalright XP-90 w/ 80mm SmartFan 2 + Evercool VC-RE

 

 

 

 

==========

 

 

Genie BIOS Settings:

FSB Bus Frequency - 273

LDT/FSB Frequency Ratio - 3

CPU/FSB Frequency Ratio - 9

PCI eXpress Frequency - 100Mhz

 

CPU VID StartUp Value - 1.450v

 

CPU VID Control - 1.450v

CPU VID Special Control - Above VID * 104%

LDT Voltage Control - 1.20v

Chip Set Voltage Control - 1.50v

DRAM Voltage Control - 2.70v

 

DRAM Configuration Settings:

DRAM Frequency Set - 150=RAM/FSB:03/04

Command Per Clock (CPC) - Enable

CAS Latency Control (Tcl) - 2

RAS# to CAS# delay (Trcd) - 03 Bus Clocks

Min RAS# active time (Tras) - 07 Bus Clocks

Row precharge time (Trp) - 02 Bus Clocks

Row Cycle time (Trc) - 07 Bus Clocks

Row refresh cyc time (Trfc) - 14 Bus Clocks

Row to Row delay (Trrd) - 03 Bus Clocks

Write recovery time (Twr) - 03 Bus Clocks

Write to Read delay (Twtr) - 02 Bus Clocks

Read to Write delay (Trwt) - 03 Bus Clocks

Refresh Period (Tref) - 3120 Cycles

Write CAS Latency (Twcl) - Auto

DRAM Bank Interleave - Enabled

 

DQS Skew Control - Auto

DQS Skew Value - 0

DRAM Drive Strength - Level 6

DRAM Data Drive Strength - Auto

Max Async Latency - Auto

DRAM Response Time - Normal

Read Preamble Time - Auto

IdleCycle Limit - 256 Cycles

Dynamic Counter - Disable

R/W Queue Bypass - 16 x

Bypass Max - 07 x

32 Byte Granularity - Disable(4 Bursts)

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z 1.30:

 

oc_data_273x9_cpuz_prime_3d01.jpg

 

 

3dMark2003:

 

oc_data_273x9_3d03.jpg

 

 

3dMark2005:

 

oc_data_273x9_3d05.jpg

 

 

Aquamark 3d:

 

oc_data_273x9_aqua3d.jpg

 

Everest 2.20:

oc_data_273x9_everest_read_2.20.405.jpg

 

==========

 

 

 

short description:

273x9 @ 2457Mhz, 1.450v + 104%

2-3-7-2 @ 2.7v vdimm

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×