Guest BLiTzKRiEG Posted April 23, 2005 Posted April 23, 2005 Have been messing with my rig and overclocking.... With the 10x multi I reached 268 FSB and was able to benchmark.... but hit 270FSB and kept freezing during 3dmark01... with the 9x multi I reached 297 FSB and was able to benchmark.... but tried 300FSB and kept freezing during 3dmarl01.... heres my Genie bios setup: 298 x2.5 down16 up16 x9.0 100MHz Disable Startup 1.425 126% 1.40 V 1.80 V 3.10 V Disabled Auto PinStrap Disabled Enabled Enabled Disabled Enabled ---------------- DRAM Config Screen: 200 (1:1) Enable 2.5 04 Bus Clocks 08 Bus Clocks 04 Bus Clocks 07 Bus Clocks 17 Bus Clocks 03 Bus Clocks 02 Bus Clocks 02 Bus Clocks Auto 4708 Cycles Auto Enabled Auto 0 Auto Level 4 07.0 Nano Seconds Auto 256 Cycles Disable 16 X 07 X Disable(8 Bursts) Did I reach the CPU limit of 2.7GHz or am I able to make some adjustments to get me over that hump? Quote Share this post Link to post Share on other sites More sharing options...
Guest gijoe Posted April 24, 2005 Posted April 24, 2005 I have a different cpu but i have the same problem 10x268 and it blocked @270 changed to 11x260 np to bench03 and 05 but anything over would not go. Now i am starting to think that for me its a heat problem on the pwm. On bleedin edge i came arcross a post on this and it seems that it tens not to be too stable over the mid 50's and mine was running much higher so later this week its fan mod time coz i am sure this rig should be stable at 3ghz. I can get it there but not stable. btw the 03 scores were when it was cold on first start. Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.