Jump to content
Sign in to follow this  
Sparx

Ut SLI and SLI both Nf4 what is the difference?

Recommended Posts

The boards are identical, the UT board doesn't come w/ Front X and some other accessories that the straight Lanpart SLI-DR does thats the only diff, what comes in the package :)

Share this post


Link to post
Share on other sites

SLI-D

http://www.dfi.com.tw/Product/xx_product_s...TYPE=LP&SITE=US

 

Serial ATA with RAID

Four Serial ATA ports

SATA speed up to 3Gb/s

RAID 0, RAID 1 and RAID 0+1

NVIDIA RAID allows RAID arrays spanning across Serial ATA and Parallel ATA

 

SLI-DR

http://www.dfi.com.tw/Product/xx_product_s...TYPE=LP&SITE=US

 

Serial ATA with RAID

Four Serial ATA ports supported by the nForce4 chip

- SATA speed up to 3Gb/s

- RAID 0, RAID 1 and RAID 0+1

- NVIDIA RAID allows RAID arrays spanning across Serial ATA and Parallel ATA

Four Serial ATA ports supported by the Silicon Image Sil 3114 chip

- SATA speed up to 1.5Gb/s

- RAID 0, RAID 1, RAID 0+1 and RAID 5

 

 

oh and look at the pictures

Share this post


Link to post
Share on other sites

the newegg pics are at slightly different angles...

not sure but... looks like the sticker on the Maglev chipset fan is different. that could cost 31$.

Share this post


Link to post
Share on other sites

OK, for clarity.

 

The Lanparty nF4 SLI-DR and the Lanparty UT nF4 SLI-DR are the exact same motherboard.

 

Lanparty nF4 SLI-DR motherboard = Lanparty UT nF4 SLI-DR motherboard.

 

The packaging is different.

 

The Lanparty nF4 SLI-DR package comes with a sticker, FrontX hardware, wire loom and carrying strap.

 

The Lanparty UT nF4 SLI-DR does not have the above accessories included.

 

Additionally,

 

The Lanparty nF4 Ultra-D is also the same exact motherboard using the Ultra (non SLI) chipset without the additional SIL four port SATA controller or the SLI bridge.

Share this post


Link to post
Share on other sites

FrontX is a piece of hardware that mounts in a 5.25" bay. It allows you to use audio, USB and Firewire on the front of your case if it doesn't include these connections. I think it also allows you to move the Diagnostic LEDs to the front like the nF2 kit.

Share this post


Link to post
Share on other sites

Yes and the DFI 'frontX' has the correct loopback ports for using onboard sound and some cases do not have the right loopback ouput ports.

 

RGone...

 

FrontX is a piece of hardware that mounts in a 5.25" bay. It allows you to use audio, USB and Firewire on the front of your case if it doesn't include these connections. I think it also allows you to move the Diagnostic LEDs to the front like the nF2 kit.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...