Guest Simon Posted April 20, 2005 Posted April 20, 2005 Right, with 2 sticks of geil vaule in, it doesnt post, with one in the second oranage slot it does. so i plan to flash the bios with this boot cd and instructions Bootable CDROM (ISO) DOS Image w./ All Bios Revisions to Date (4/14/05): http://indabasement.com/DFINF4/bios/DFI_BIOSROM.rar ex: To Burn With Nero: Launch Nero -> Burn -> Image (nero6) or File -> Burn Image (nero5). Set First Boot to CDROM -> Follow On Screen Instructions to Flash. How-To Flash Bios: grab a bootable pure dos floppy disk (you can download dos image with 310 public release (NOT the "P" performance/beta version, but final version) on it, to be written to floppy above OR download bootable CDROM image w./ all bioses OR you can make one through your operating system: right click a: in my computer -> format -> check make ms dos startup disk) and place awdflash and bios file on this floppy. these can be found (dos flash util and bios file) above. enter bios -> load optimised defaults -> y->save -> boot off disk -> follow flash instructions in the .txt that comes with awdflash.rar OR type 'flash' at A:, if using bootable dos image w./ 310 on it OR follow on screen instructions if using bootable CDROM image. If using the 'awdflash.rar method', remember to replace BIOSFILE.BIN with bios filename (awd859e BIOSFILE.BIN /py /sn /cd /cp /cc /LD /R /f) -> after it is done, it will reset on its own -> after reset, enter bios -> load optimised defaults->y->save->after POST finishes -> shutdown ->switch off PSU -> unplug -> wait for yellow lights to turn off -> press power a few times-> set clear CMOS jumper -> wait for 10 minutes->set jumper back -> plug in ->switch on -> power up -> enter bios -> load optimised defaults -> now configure your bios. -Per. [/] Can anyone see anything wrong with that ? or suggest anything else before flashing? Quote Share this post Link to post Share on other sites More sharing options...
Guest Simon Posted April 21, 2005 Posted April 21, 2005 up` Quote Share this post Link to post Share on other sites More sharing options...
spdiscus Posted April 21, 2005 Posted April 21, 2005 I power down right after it's done flashing (you can jump back to the DOS prompt with F10). Then clear CMOS. Then boot into BIOS to load optimized and restart. Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.