buggered board or what?

[corky]

hello ,hopefully someone can help-rmad nf3 250 gb mobo -eventually returne repaired supposedly and guess what put this board in a new system and the same no boot no beeps ,powers up and thats it -is this it 3 months of a dfi board and i aint ran it yet-this sucks!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[Angry_Games]

please check the rules and the Important Info threads stuck to the top of this section.

 

If you are looking for help, reading this is the most important first-step for you to take.

 

this helps us tremendously to help you solve your issue if we can see what is in your system every time you post:

 

 

 

PLEASE SEE THIS LINK!:

http://www.dfi-street.com/forum/showpost.p...701&postcount=2

 

 

 

Be as thorough as possible please. Voltages, timings, settings, bios version, etc.

 

The more information you give us about the problem, and the more details about your hardware in your sig = more help we can give you.

[corky]

i dont keep same kit ,i have tried various psu mem cpu and vga-nothing else connected............................................so this has already cost me down time and 20 pound to return it the first time -now im getting a bit irate!!!!!!!!!!!!!!

[RGone]

You can be as unhappy and disgruntled as you like sir but without some information about the setups you have tried and had fail. Well then there is nothing and no information that we could possbily relate to you that would either help or hinder.

 

I also find it very hard to see how you know the processor is such 3200/2.6GHZ if as you say you have 'never run' the board. Strange to me.

 

Now if you would prefer to furnish no particulars about the 'possible' configurations you have found to fail then there will be no help to you possible. If you prefer only to gripe and moan then you have done so and I will lock the thread and or delete it and you can sell your board on ebay and buy you whatever else it is that you think will be a better setup for you.

 

There are nO other options open as anyone in the forum will tell you. They nor self is a mind reader or can see into systems from afar. You are quite welcome to suit yourself about furnishing information though.

 

RGone...

 

hello ,hopefully someone can help-rmad nf3 250 gb mobo -eventually returne repaired supposedly and guess what put this board in a new system and the same no boot no beeps ,powers up and thats it -is this it 3 months of a dfi board and i aint ran it yet-this sucks!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[corky]

never run this rmad board but purchased another new and 1 used ,usually run two but bought more parts for a third,right psu antec 550 tc,xpower 460 -----vga x800xt and 6800 ultra------cpu 3700 dtr claw ,3200 dtr claw and 3400 newc desktop ----------mem geil 3500 g/d ,pqi 3200 turbo tried different mem in all sockets ,and all of the above are running ok as some r in this pc right now.

there is power to mobo and through it but no post beeps or bios?hope this helps have mailed the situation to dfi with the original rma number.but to be honest although usually dfi are good boards cant help but be put off by this recurring and obviously not resolved problem. :confused:

[Angry_Games]

please check the rules and the Important Info threads stuck to the top of this section.

 

If you are looking for help, reading this is the most important first-step for you to take.

 

this helps us tremendously to help you solve your issue if we can see what is in your system every time you post:

 

 

 

PLEASE SEE THIS LINK!:

http://www.dfi-street.com/forum/showpost.p...701&postcount=2

 

 

 

Be as thorough as possible please. Voltages, timings, settings, bios version, etc.

 

The more information you give us about the problem, and the more details about your hardware in your sig = more help we can give you.