Madsengaard Posted April 8, 2005 Posted April 8, 2005 :confused: Went to change my latency for my Corsair Platinum pc 3200 from 2.5,3,3,8 to 2,2,2,5 and guess what upon saving it reboots and I get: Award Bootblock BIOS v1.0 Bios Rom Checksum error detecting floppy drive a media INSERT SYSTEM DISK AND PRESS ENTER_ thought perhaps it was asking for a bios update so I downloaded newest bios it went through the process and asked me which file to use to update... typed in .bin file name, hit enter and nothing happens... just locks... upon reboot same message as above... HELP! Share this post Link to post Share on other sites More sharing options...
Slowmo Posted April 8, 2005 Posted April 8, 2005 Reset Bios !!! Share this post Link to post Share on other sites More sharing options...
Madsengaard Posted April 10, 2005 Posted April 10, 2005 Did that and then updated... all ok now. however got new corsair xms 3200c2pt memory and found out that though they are the same one is version 2.2 and the other is version 5.2... mt original twinx 512's were the 2.2 and the board doesn't allow two versions for dual channel. now I have twinx 1024's... one in each channel and all is well except that the bios won't allow me to change latency. Do you know how to unlock? Share this post Link to post Share on other sites More sharing options...
abraxum Posted April 10, 2005 Posted April 10, 2005 Set System Bandwith to disabled as shown here http://www.angrygames.com/LP875B_bios1.htm . Then you should be able to change the timings Share this post Link to post Share on other sites More sharing options...
VectorTensor Posted April 10, 2005 Posted April 10, 2005 I tried your link and it didnt work for me so here goes another link hope it works :nod: DFI LanParty I875B Bios Screens Share this post Link to post Share on other sites More sharing options...
VectorTensor Posted April 10, 2005 Posted April 10, 2005 Heres another link that might work :nod: http://www.angrygames.com/LP875B_bios1.htm Share this post Link to post Share on other sites More sharing options...
mdk2002 Posted April 2, 2007 Posted April 2, 2007 All Expert, I bought a 500GB HDD SATA 1/2. I try to winflash updated the BIOS for LP Pro875B REV. B...I have DL the latest software from the DFI.com for it... 1. I did to winflash it from the XP window & process 100% then the system reboot it self & up on screen it give me this messages... Award Bootblock BIOS v1.0 Bios Rom Checksum error detecting floppy drive a media INSERT SYSTEM DISK AND PRESS ENTER_ thought perhaps it was asking for a bios update so I downloaded newest bios it went through the process and asked me which file to use to update... typed in .bin file name, hit enter and nothing happens... just locks... upon reboot same message as above... Does anybody know how to reset the montherboard or reset it...Please help me...email [email protected] Please help, Please help :sad: :sad: :sad: :sad: Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now