What power supply do you have? (open to all platforms)

[teetu]

ocz modstream 520. it's very nice, but stiff cables a bit of a nuisance to work with

[pharmd24]

E-POWER "Tagan" Series 480W Power Supply, Model "TG-480" -RETAIL

 

Very very pleased - I have one 120mm fan on my rad and using swiftech kit (mounted out side case) in a chieftech tower case.

 

QUIET!!!!

[volvic]

Tagan 380W, 20 Pin:

 

3200+@2,55GHz, 3 160GB Samsung HDDs, 2 optical drives, one 6600GT and no problems.

[diabloII]

antec neopower 480

 

i think it's dual 18amp rails on 12V

[Angry_Games]

How about 20 pin modded to 24 pin?

 

Antec SL350 with 3.3v, 12v, and 5v/gdn pulled form molex and aux connector, modded into the 4 extra pins...

 

 

Holds 12.02v on my 12v line under 2.6ghz A64 1.7vcore, 230mhz mem, 3.2v, wd800jb, dvd burner, 4x 90mm fans, tornado, and now 2 UV CCFL's.

 

Prime stable.

 

then you have a 20-pin psu since it is not a real ATX2.0 24-pin psu

[zeus_999]

I'm using a OCZ Powerstream 600w

[dippyskoodlez]

then you have a 20-pin psu since it is not a real ATX2.0 24-pin psu

 

What all is changed by the "2.0" spec, other than the extra 12v, 3.3, and 5v? Just wiring?

 

If its just wiring, its now basicly a 24 pin...

[Angry_Games]

but it is not a 24-pin power supply. it is only a 20-pin power supply that you have modified. Not much to argue about there.

[flexy]

but it is not a 24-pin power supply. it is only a 20-pin power supply that you have modified. Not much to argue about there.

 

thats not the point. ATX2.0 is about the dual 12V rails, correct me if i am wrong !

 

But..of course HIS is now a "24pin PSU" (whatever the definitition is...because it provides 24pins ) and so is my Enermax which i modded too....but its not ATX2.0 because it has only one 12V rail

[red930]

How about 20 pin modded to 24 pin?

This is the key concept modded!

 

If it's modded it isn't a true ATX 12V 2.X power supply. It doesn't get much more to the point than that!

 

Nothing else matters.

[CheesePoofs]

420w powerstream.

I had a 330w antec TruePower in it (20 pin with 17a on the 12v rail) and it ran fine, passed prime95 and memtest.

[dippyskoodlez]

This is the key concept modded!

 

If it's modded it isn't a true ATX 12V 2.X power supply. It doesn't get much more to the point than that!

 

Nothing else matters.

 

Thats why I asked what all they changed with the "2.0" spec... if its just extra lines from the PSU for more connectors, then it would effectivly meet the 2.0, basicly, imo.. but they changed more, I'm assuming..

 

I'm not sure if this is necessary to be considered a 24 pin, when comparing, or a 20 pin--

 

using just 20 pins is completely unstable.

 

using the 4 modded pin adaptor, I achieve 2.6+ghz stability... Its doing the same work and connections as a normal 24 pin.... but is "stock", a 20...