Jump to content
soundx98

The ULTIMATE MBM 5 Settings/Help Thread

Recommended Posts

You need to replace the default Data File with the posted Data files. Do NOT use configuration wizard.

 

I must be blind or daft but ... what posted data files :confused: ? I don't see a link for that.

Share this post


Link to post
Share on other sites

it is true, i forgot to mention that my card wasn't abel to report its temp to any prg even Coolbits2 except the Winfox

 

so i edited its bios and enabled the tmep reading ( yes this trick wrks for 6600GT and 6600 )

 

so every 6600 series user who can't get MBM5 to read his vga's temp , please try to update ur vga bios and see it if will work or not

 

i used winfox also to flash the bios cause i hate using Dos :)

 

@NEC (and anybody else who doesn't see temps with 6600gt):

This should be interesting for you to read

http://www.ocia.net/articles/tempmonitoring/page1.shtml

 

There might be easyer way to this with one of the bios editor (nVidia bios editir or NiBiTor maybe?) - I saw something a while ago...

Share this post


Link to post
Share on other sites
Guest NEC

Oh, I was trying to make a DOS bootable floppy disk with a CD, hehe, let's see about this Winfox.

 

 

 

/edit: found it on eMule . . . 22.4MB ? it's not just a BIOS flash utility, right ?

Share this post


Link to post
Share on other sites
Oh, I was trying to make a DOS bootable floppy disk with a CD, hehe, let's see about this Winfox.

 

 

 

/edit: found it on eMule . . . 22.4MB ? it's not just a BIOS flash utility, right ?

 

no it is not and it is specific to leadtek cards but some users with other brands reported that it worked with them

 

u can get it form leadtek homepage which will be faster than P2P

Share this post


Link to post
Share on other sites

@ _xhp_ or anyone else using his plugin,

 

When you set sensors 22&23 to monitor GPU and Mem clock speeds is there a way to get the dashboard widgets to show MHz instead of Degrees C?

Share this post


Link to post
Share on other sites
Oh, I was trying to make a DOS bootable floppy disk with a CD, hehe, let's see about this Winfox.

 

/edit: found it on eMule . . . 22.4MB ? it's not just a BIOS flash utility, right ?

 

I would realy do the bootable floppy flash - it is leadtek app so don't use it with MSI to flash a bios, it could work, or it could result in unpredictable consequences...

Share this post


Link to post
Share on other sites
@ _xhp_ or anyone else using his plugin,

 

When you set sensors 22&23 to monitor GPU and Mem clock speeds is there a way to get the dashboard widgets to show MHz instead of Degrees C?

 

Unfortunatly, no. I use OSD and short script version ("T22V Mhz") so I see Mhz instead of C...

Share this post


Link to post
Share on other sites
Guest NEC
I would realy do the bootable floppy flash - it is leadtek app so don't use it with MSI to flash a bios, it could work, or it could result in unpredictable consequences...

 

Yes, I was going to use Winfox just to see if it shows something new (and perhaps extract the BIOS). However, to boot with, CD and floppy are the same, right ?

Share this post


Link to post
Share on other sites

I went to the MBM5 site and haven't seen it posted here, but how do I add the other fans from my NF4 SLI-DR m/b to it's list? I have 4 fans besides the CPU and chipset fan. I needed to use a converter get power to my last fan.

Share this post


Link to post
Share on other sites
I went to the MBM5 site and haven't seen it posted here, but how do I add the other fans from my NF4 SLI-DR m/b to it's list? I have 4 fans besides the CPU and chipset fan. I needed to use a converter get power to my last fan.

 

If I understand your question. You should see four (0-3) fans in the system properties. 0 thru 2 should give readings from CPU header, PWMIC and chipset. The fourth give no reading. Only 3 headers are monitored on that board.

 

Elaborate on "converter".

Share this post


Link to post
Share on other sites

By converter, I meant a power connector converter. There are 5 fan connecters on the m/b. One is taken up by the CPU fan, one by the chipset fan. I would like to monitor the other 3.

 

OK, I just saw in the d/l documentation that only 3 are monitored. Thanks.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...