Inu_Yasha Posted June 10, 2003 Posted June 10, 2003 Ok, I'm thinking about modding my psu; here's a cover that is uv, but the problem is how do i attach it? http://store6.yimg.com/I/svcompucycle_1745_39150244 Also, I want to organise my wires in my case so I'm going to buy some pet wrap. The problem is how do you remove the hard plastic covering on the psu wires? Here's the product and here's the guide that explains the procedure of putting it on: http://www.svc.com/uvrewimapr.html http://www.pcbritt.com/sleeveguide.htm Any help would be greatly appreciated! Quote Share this post Link to post Share on other sites More sharing options...
justinal Posted June 10, 2003 Posted June 10, 2003 http://www.virtual-hideout.net/guides/cabl...ing/index.shtml this will explain how to put the sleeving on the psu and it explains how to take the connectors off Quote Share this post Link to post Share on other sites More sharing options...
Inu_Yasha Posted June 10, 2003 Posted June 10, 2003 Thanks for the guide! Now comes the question of how to attach the psu case mod... Any ideas? Quote Share this post Link to post Share on other sites More sharing options...
Overclocker16 Posted June 10, 2003 Posted June 10, 2003 You use double sided tape. But remember, using them will make the PSU like 1/8" bigger I believe. http://www.frozencpu.com/cgi-bin/frozencpu...enu_search.html They sell the same things. Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.