Guest bradmax57 Posted February 10, 2005 Posted February 10, 2005 Set up new system yesterday and eventually got it running after about 4 hours trying to install xp ran 3d mark 05 and got approx 9k so I thought Id try and do a bit overclcoking, tried 250 x 10 changing ram timings to 2.5-3-3-10 upping dram to 2.9v andupped the vcore to 1.55v +10% now the damn thing wont even find my hdd and wont boot ive tried all the different sockets nothing, also just noticed its not detecting my optical drives either???? DFI NF4 SLI-DR AMD 64 4000+ 2 x 512mb Corsair 3200 XL Maxtor 250GB 16mb SATA 150 HDD Plextor PX-716A DVD +/- Sony CDX 320 CDRW/DVD OCZ Powerstream 520w PSU 2 x Inno 3d 6800Gt's Asetek Antartica Watercooled. Quote Share this post Link to post Share on other sites More sharing options...
Guest bradmax57 Posted February 10, 2005 Posted February 10, 2005 err okay I am think cleared the cmos and all seems okay , this bios is a hell of a lot more complicated than Im used to Quote Share this post Link to post Share on other sites More sharing options...
cpuz Posted February 10, 2005 Posted February 10, 2005 I was going to say to clear the cmos. Good luck w/ your new rig and let us know how you make out! Quote Share this post Link to post Share on other sites More sharing options...
Guest bradmax57 Posted February 10, 2005 Posted February 10, 2005 Dont think its too happy with my ram though havent had much luck overclocking it yet, i managed to get this chip upto 2.9ghz on my old nf3 ultra havent managed anything near that yet, probably take me a while to figure the tons of bios options out Quote Share this post Link to post Share on other sites More sharing options...
cpuz Posted February 10, 2005 Posted February 10, 2005 I believe OPB over at xtreme will be creating a thread for settings in the bios of DFI NF4 boards...keep an eye out. Quote Share this post Link to post Share on other sites More sharing options...
Guest bradmax57 Posted February 10, 2005 Posted February 10, 2005 I believe OPB over at xtreme will be creating a thread for settings in the bios of DFI NF4 boards...keep an eye out. Cheers will do that, on another note any idea if I could fit 2 x arctic cooling rev 5 coolers to my 6800gts? they are hellish noisy Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.