Drake Posted February 1, 2005 Posted February 1, 2005 i put a passwosd to start my computer from the keyboard.. everything worked fine for a day or 2... but today it didn't start ... and the password was the same !!!!!!!!!!! :confused: ... i reset the bios.. but nothing... the computer doesn't start !!!!!!! what should I do ??????? PS: the stand by led on the mobo show's that the board is powerd... Quote Share this post Link to post Share on other sites More sharing options...
tornskin Posted February 2, 2005 Posted February 2, 2005 Have you tried to clear CMOS removing the battery too? If not, change the clear CMOS jumper to clear CMOS, remove the battery, wait some minutes, put the battery on, change again the jumper and power up!!! Hope this helps. Quote Share this post Link to post Share on other sites More sharing options...
Angry_Games Posted February 2, 2005 Posted February 2, 2005 pull battery, set CMOS to clear position, let it sit for 24 hours minimum. edit: make sure psu is not powered on either! Quote Share this post Link to post Share on other sites More sharing options...
Drake Posted February 2, 2005 Posted February 2, 2005 pull battery, set CMOS to clear position, let it sit for 24 hours minimum. edit: make sure psu is not powered on either! yap. .. is ok now.. the computer didn't start because i put him to start from the keyboard and.. the board was powered when i reset the bios.. and the keyboard was powered too ... 10x all.. Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.