Memory + Lanparty UT 250gb + Memtest = no good

[Guest Jeff]

After finally getting all 3 sticks of corsair 512 3200 to boot on my board i am now faced with another issue. no doubt as easily resolved as the last one.

 

Each stick on its own runs through memtest86 for hours without any errors, but as soon as i add another stick or all 3 sticks memtest gets errors in Test#5 within about 10-15 mins, and not just one or two errors. the last test resulted in around 30000 errors during a 10hr test.

 

I also ran prime with all 3 sticks installed and it got an error at 3hrs then when i ran it again it got an error at 53 mins.

 

Everything is running stock speeds, so does this mean the board is faulty or is it another one of those wierd memory controller issues i keep reading about.

 

Im going to go run some more tests, thanks in advance

 

Jeff

[Angry_Games]

sounds like the memory controller on the cpu is weak

[LoN3R]

i call Ditto see if u can RMA that suxor

[Guest Jeff]

ok thanks

ill see if i can RMA

 

sorry for not replying sooner, been on holiday for a few days.

 

thanks again

 

Jeff