Jump to content
Sign in to follow this  
soundx98

XP2600 Mobile 0401

Recommended Posts

Just picked up an AMD XPMG2600FQQ4C - IQYHA0401MPMW.

Anyone out there done any overclocking with one?

Share this post


Link to post
Share on other sites

Sice it has IQYHA in the stepping it should fly, I had an IQYHA 2600-m and ran it at 2.6 24/7 it did 2.75 but that was too hot for my setup at the time. Of course you never know though.

Share this post


Link to post
Share on other sites

Hey mate

 

I do own one with the exact same stepping. Currently running it at 236 X 11with 1.875vcore. When I first got the chip it did 2.6Ghz at 1.85vcore and could prime on for more than 24 hours no problems. I didn't have much time to do such long tests so currently I just run it at 1.875.

 

Managed to boot in at 2.7Ghz (235X11.5) with 1.9vcore but I think my PSU couldn't take it. Thinking of changing my PSU as all my rails are below the ratings. Hope that helps :)

Share this post


Link to post
Share on other sites
Originally posted by soundx98

Thanks man, I appreciate the info. Has anyone actually used the 0401?

 

Yes I'm using one in another machine of mine.. Numbers are very close to yours.

 

AXMG2600FQQ4C

IQYHA0401UPMW

Y911792A40422

Share this post


Link to post
Share on other sites

Redrum, in your sig you stated 245X11 - at what vcore?

 

I'm thinking of getting Buffalo PC3700 too but 512MB modules. Are the 512 sticks dual or single banked? Sorry, a little off topic here :P

Share this post


Link to post
Share on other sites

SoundX98,

 

Mine is a 0401, when the weather was a bit cooler here I had no problems with 2575 MHz at 1.82V. Now it is summer (Temp 39oC on Sunday). I have clocked back to 2450MHz @ 1.75V. The load temp is about 55 to 60 oC.

 

I am thing about giving one of those new Gigabyte Rocket coolers a go...

 

Regards Bruce

Share this post


Link to post
Share on other sites
Originally posted by De_Cruelz

Redrum, in your sig you stated 245X11 - at what vcore?

 

I'm thinking of getting Buffalo PC3700 too but 512MB modules. Are the 512 sticks dual or single banked? Sorry, a little off topic here :P

 

The V-Core on mine according to CPU-Z ver 1.23.2 was 1.84 Volt.

And as I stated when I bought my Buffalo they were using Windbond BH-5 chips on them. Now they are Micron chips not nearly as good. But I think they are one sided. At one time people were saying 1 gig of ram wouldn't clock as high as 2x 256 Meg.

Share this post


Link to post
Share on other sites

@Tedy - bought used XP2600M, SLK900A, Vantec Tornado, Vantec Black 4 Fan Controller, Small Tube of As5, and a Fortron 530 for $130 US shipped to my door. The stuff looks brand new!

 

Building Ho numba Fo.

 

Smart shoppers know. :)

 

Deal was so good I wanted to make sure the CPU was kosher.

Usin "AQs" in other sistas.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...