Jump to content
Sign in to follow this  
Cereal_Killah

Mushkin Lvl1 3200

Recommended Posts

Does anyone know what chips these Lvl 1 2-3-2's might have on them and how far I could expect to push them? They are have the black heatspreaders and black PCB.

 

Thanks:)

 

BTW, I LOVE this DFI board. Stable and fast, and I havent even started overclocking yet!

Share this post


Link to post
Share on other sites

well, they should have CH-5, but its possible that the newer ones have Mosel SAT -B5.

 

the CH-5 is totally pot luck, you could get a max of 210 at 3-4-4-10, or you could get 250 at 2-2-2-5, its just luck of the draw.

 

the Mosel, should go 240-245 at 3-3-3-x.

 

you will just have to try em out man:nod:

 

-Jess-

 

BTW if you could, make a sig, with you system spec's inculded:angel:

Share this post


Link to post
Share on other sites
Originally posted by Cereal_Killah

With VERY relaxed timings, the memory is only stable at 210 FSB...

 

I guess I could always sell it......

 

have you tried increasing Vdimm?

 

what ram slots are you using?

 

what all timings have yuou loosened?

 

-Jess-

Share this post


Link to post
Share on other sites

Sorry for the Delay....

 

Ok, here is what I did...

 

I used your guide to memory timings and changed everything to the edge of overkill and tried to boot 250 1:1.

 

I also upped the voltage to 3 volts, AFTER going into windows and verfying the voltage on the chips (did it at 200 1:1 before trying to O/C).

 

CAS was set to 3, otherwise went with all the max recommended relaxed timings....

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...