I would like more-dont we all

[epoch]

Hi,

 

rather new to the DFI board but so far found it superb.

 

been reading loads on it lately and managed to get to my limit with my rig i thik, but i am hoping someone in ere can help me get more.

 

 

Currently i have it running @

 

10 x [email protected]

mem [email protected]

LDT = Auto and works at x3

chipset at 1.7v

i have it all water cooled and temps dont go above 40 under load.

 

i have a leadtek 6800 gt with ultra bios running @ 400/1100 temp is about 34-40 underload.

bios is the modded one.

 

 

if you need any more info let me know

 

CPU = 3400XP (CO) 1mb cache

mem = ballistix pc 4000

 

thanks in advance.

[memoryman]

I think you're doing pretty well with your overclock.

[jess1313]

Originally posted by epoch

Hi,

 

rather new to the DFI board but so far found it superb.

 

been reading loads on it lately and managed to get to my limit with my rig i thik, but i am hoping someone in ere can help me get more.

 

 

Currently i have it running @

 

10 x [email protected]

mem [email protected]

LDT = Auto and works at x3

chipset at 1.7v

i have it all water cooled and temps dont go above 40 under load.

 

i have a leadtek 6800 gt with ultra bios running @ 400/1100 temp is about 34-40 underload.

bios is the modded one.

 

 

if you need any more info let me know

 

CPU = 3400XP (CO) 1mb cache

mem = ballistix pc 4000

 

thanks in advance.

 

hey man, nice rig, and really nice of, especially for a CO rev CPU.

 

do you know what is hitting a wall, your CPU, or your ram?

 

you could drop your CPU multi back, to 9 or 8, and see if your ram will go on up,...or

 

set your ram to 166mhz(5:06) in bios.

 

GL

 

-Jess-

[Guest Hellfire]

Hey Jess,

 

I've been working on modifying modbin so it will works with the new bioses for the nf3 boards. I'll be sure to send you the modified version of this modbin so it would be easier to modify. I'll also send one copy to tictac. Been kinda busy lately so it may take a while. I'm actually working with a professor to reverse engineer the new bioses.

 

Hellfire

[jess1313]

Originally posted by Hellfire

Hey Jess,

 

I've been working on modifying modbin so it will works with the new bioses for the nf3 boards. I'll be sure to send you the modified version of this modbin so it would be easier to modify. I'll also send one copy to tictac. Been kinda busy lately so it may take a while. I'm actually working with a professor to reverse engineer the new bioses.

 

Hellfire

 

Hellfire, that would just make my day man. i really really really, apreciate it, and yes, it woudl make things much easier:nod:

 

Gl

-Jess-

[epoch]

Originally posted by jess1313

hey man, nice rig, and really nice of, especially for a CO rev CPU.

 

do you know what is hitting a wall, your CPU, or your ram?

 

you could drop your CPU multi back, to 9 or 8, and see if your ram will go on up,...or

 

set your ram to 166mhz(5:06) in bios.

 

GL

 

-Jess-

 

Thanks Jess,

 

not sure what is blocking me.

 

The memory does not apear to want to go above 260 @ 3.0v which for ballistic that runs at default 250 @ 2.8 is a bit poor i was hoping for a bit more.

 

As for the CPU, i think since it is a CO, i am stuffed, well that is what most people say, but i dont believe everything i read so i will try and get more out of it and i cant i will sell it and go for a better chip.

 

I am getting a problem with my pwmic sensor / the musfits overheating under load getting up to 70 - 90 c underload.

 

 

I have also got :

2 X 512 DDR400 corsair twinx 3200LLPT

that runs @ 2-3-2-6

 

 

opoosed to the ballistix:

512MB DDR PC4000 • 2.5-4-4-8 • Non-parity • DDR500 • 2.8V

 

not sure if that will make any improvement as i carrently have them in a NF7-S board.

 

What do u all think is the best CPU for clocking on this board??

[jess1313]

Originally posted by epoch

Thanks Jess,

 

not sure what is blocking me.

 

The memory does not apear to want to go above 260 @ 3.0v which for ballistic that runs at default 250 @ 2.8 is a bit poor i was hoping for a bit more.

 

As for the CPU, i think since it is a CO, i am stuffed, well that is what most people say, but i dont believe everything i read so i will try and get more out of it and i cant i will sell it and go for a better chip.

 

I am getting a problem with my pwmic sensor / the musfits overheating under load getting up to 70 - 90 c underload.

 

 

I have also got :

2 X 512 DDR400 corsair twinx 3200LLPT

that runs @ 2-3-2-6

 

 

opoosed to the ballistix:

512MB DDR PC4000 • 2.5-4-4-8 • Non-parity • DDR500 • 2.8V

 

not sure if that will make any improvement as i carrently have them in a NF7-S board.

 

What do u all think is the best CPU for clocking on this board??

 

i would have to say a 3200/3400 dtr....although.....

 

i WOULDNT get the 3400 unless you can find one that is garrenteed to be a CG rev, because the vast magority are CO's.....

heres a link to a 3200 at newegg...

 

http://www.newegg.com/app/ViewProductDesc....-103-443&depa=1

 

its a cg, cuz the model # ends in AR....

GL

-Jess-

[soundx98]

@jess1313 - Just noticed that the Angry One gave you MOD status. Kudos my man, well deserved to say the very least.

 

Thanks for all you valuable contributions!

[jess1313]

Originally posted by soundx98

@jess1313 - Just noticed that the Angry One gave you MOD status. Kudos my man, well deserved to say the very least.

 

Thanks for all you valuable contributions!

 

Thank you very much man, I really feel honored to be part of the group:cool:.

 

-Jess-