philbrown23 Posted November 1, 2007 Posted November 1, 2007 I have my cpu @ 2100.59 volt @1.344-1.36 multiplyer 10x fsb210.05 Ram @ 2048mb freq. @ 210 fsbdram cpu/10 3-4-4-8-11-2t-16 Tried to go higher but would not complete load??? What did I do wrong??? what do I do???? Also how do I get up some screenshots of cpu-z????? Thats what I was going to post but I could not figure out how to do it. THANKS!! Share this post Link to post Share on other sites More sharing options...
oblivescence Posted November 1, 2007 Posted November 1, 2007 start tweaking settings, maybe try loosening the timings on the ram. oh and to take a screenshot, press the print screen key and that will copy the screenshot onto the clipboard. EDIT: When I say "start tweaking settings", I mean to say "start tweaking settings that you know what they mean" just for clarity. Share this post Link to post Share on other sites More sharing options...
exeter_acres Posted November 1, 2007 Posted November 1, 2007 Here is some info http://forums.overclockersclub.com/index.php?showtopic=66765 and here http://forums.overclockersclub.com/index.php?showtopic=68453 and might want to take a peak at this http://forums.overclockersclub.com/index.php?showtopic=64524 Share this post Link to post Share on other sites More sharing options...
philbrown23 Posted November 1, 2007 Posted November 1, 2007 start tweaking settings, maybe try loosening the timings on the ram. oh and to take a screenshot, press the print screen key and that will copy the screenshot onto the clipboard. EDIT: When I say "start tweaking settings", I mean to say "start tweaking settings that you know what they mean" just for clarity. how do I find the clipboard I pressed shift printscreen......nothing happens so then I pressed just printscreen........ still nothing????dont know what I'm doing wrong. Also to "loosen" the ram timings would I bring the numbers up or down???? right now I'm only running @ 35c should I increase the voltage a little???? Share this post Link to post Share on other sites More sharing options...
oblivescence Posted November 1, 2007 Posted November 1, 2007 go to an image editor of your choice and press paste. Then your screenshot is no longer on the clipboard. If you don't have an image editor, google gimp. It works well and is free, but its easy to get lost looking for the right button at times. oh and loosen = bigger numbers, tighten = smaller numbers Share this post Link to post Share on other sites More sharing options...
philbrown23 Posted November 1, 2007 Posted November 1, 2007 go to an image editor of your choice and press paste. Then your screenshot is no longer on the clipboard. If you don't have an image editor, google gimp. It works well and is free, but its easy to get lost looking for the right button at times. oh and loosen = bigger numbers, tighten = smaller numbers Ok so now all of the sudden after my pc seems to be stable it just stops and displays a blue screen????it say's memory dump or something??? Share this post Link to post Share on other sites More sharing options...
philbrown23 Posted November 1, 2007 Posted November 1, 2007 Ok so now all of the sudden after my pc seems to be stable it just stops and displays a blue screen????it say's memory dump or something??? might be having hdd failure or something? All of the sudden it will not read my primary hdd just my slave. Share this post Link to post Share on other sites More sharing options...
exeter_acres Posted November 1, 2007 Posted November 1, 2007 that would be unstable........ return the settings to stock and go slower..... Share this post Link to post Share on other sites More sharing options...
Verran Posted November 1, 2007 Posted November 1, 2007 Ok so now all of the sudden after my pc seems to be stable it just stops and displays a blue screen???? How did you test the stability? Just because it boots doesn't mean it's stable... Share this post Link to post Share on other sites More sharing options...
philbrown23 Posted November 1, 2007 Posted November 1, 2007 How did you test the stability? Just because it boots doesn't mean it's stable... I just waited for the pc to start running a good temp. How do I check to see if it's stable?? Share this post Link to post Share on other sites More sharing options...
exeter_acres Posted November 1, 2007 Posted November 1, 2007 Directly from my above post Prime 95 This is a distributed computing project, but can also be used strictly for stability testing. As with most programs, it uses strenuous math calculations to see if your processor ever produces failures (wrong answers). If there were a single universal "final stability test", Prime 95 could arguably take that title. It is widely accepted and very reliable. there are others too,... learn to walk before you run and understand the risks involved with overclcoking... Share this post Link to post Share on other sites More sharing options...
Verran Posted November 1, 2007 Posted November 1, 2007 I just waited for the pc to start running a good temp. How do I check to see if it's stable?? Yikes. That's not "stable" at all. I suggest you slow down and start reading some Overclocking info, because you can change BIOS settings all day but if you don't know what you're doing you're just going to be in for a world of hurt. I wrote the OCC Overclocking Basics guide a while ago. This might be a good place to start. It's all based around A64 examples, which is what you use. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now