graysky Posted July 27, 2007 Posted July 27, 2007 (edited) If you own a Q6600, please reply with your VID and the stepping of your chip. The VID can be found using coretemp. If you're using vista, coretemp will not display the stepping in some cases, so you can use CPU-Z (it's listed under "revision") to get the stepping. Here is a shot of mine for reference: If all else fails, look on the box your q6600 came in; the last 5 letters after the Q6600 in the production code will tell you the stepping. "SLACR" means it's a G0 while "SL9UM" means it's an older B3. Here an example shot taken by XtremeTiramisu to give you an idea: So, I have a B3 w/ a VID of 1.2875v EDIT: Here are the data as of 23-Sep-2007 at 7:30 AM based on people's replies to my VID thread here and elsewhere; just as a reminder, please do not post your VID from here on out as I won't be updating the data sets: *Histograms generated with SBHisto Total replies: 208 102 replies so far for B3 stepping Q6600s: (VID: # of replies) 1.1625: 3 1.2125: 1 1.2250: 1 1.2375: 1 1.2500: 5 1.2625: 2 1.2750: 13 1.2800: 1 1.2850: 1 1.2875: 12 1.3000: 14 1.3100: 1 1.3125: 15 1.3200: 1 1.3250: 31 158 replies so far for G0 stepping Q6600s: (VID: # of replies) 1.1125: 1 1.1520: 1 1.1625: 5 1.2000: 5 1.2125: 9 1.2150: 1 1.2200: 1 1.2250: 8 1.2375: 10 1.2500: 16 1.2525: 1 1.2600: 1 1.2625: 17 1.2650: 1 1.2700: 1 1.2750: 25 1.2850: 1 1.2875: 23 1.3000: 17 1.3125: 10 1.3250: 5 Edited September 23, 2007 by graysky Share this post Link to post Share on other sites More sharing options...
graysky Posted July 29, 2007 Posted July 29, 2007 Just updated the first post of the thread with the data collected. Have a look! Share this post Link to post Share on other sites More sharing options...
graysky Posted August 2, 2007 Posted August 2, 2007 Okay guys, just updated the first post of the thread to reflect the new replies... have a look! Share this post Link to post Share on other sites More sharing options...
graysky Posted August 6, 2007 Posted August 6, 2007 I don't quite know what to make of this whole lower VID = higher o/c potential thing. My chip for example, is a B3 stepping Q6600 w/ a reported VID of 1.2875V (coretemp), yet I can run 9x266 (stock) which is stable to 2x orthos for over 8 hours (I stopped it after 8 hours) @ 1.1375V in the BIOS which is 1.040V in CPU-Z under load. I can also run 9x327 @ 1.2275V in the BIOS or 1.208V in CPU-Z under load or a full 9x333 @ 1.2625V in the BIOS or 1.232 V in CPU-Z. My point is that all these vcore values are under the VID reported in coretemp. In my case, the VID reported in coretemp doesn't seem to mean anything given that I can run my system up to a 25 % o/c well under this voltage. Questions: -What does the coretemp VID mean if anything? -When comparing two identical stepping chips, does the one with the lower VID equate to anything meaningful? Share this post Link to post Share on other sites More sharing options...
kendellrt Posted August 6, 2007 Posted August 6, 2007 Look on the box for the correct voltage. For example, my E6600 says 1.35v, but on "auto" my board sets it to 1.29v. It runs fine there at stock, but the real VID is 1.35v. Core Temp also says 1.35v. or me. Share this post Link to post Share on other sites More sharing options...
graysky Posted August 11, 2007 Posted August 11, 2007 Just updated the first post of the thread with the data collected... I counted 113 replies so far. Share this post Link to post Share on other sites More sharing options...
graysky Posted August 12, 2007 Posted August 12, 2007 Updated the first post of the thread with the data collected (123 replies now) and added some histograms and basic statics to help visualize the data set. Share this post Link to post Share on other sites More sharing options...
graysky Posted August 19, 2007 Posted August 19, 2007 (edited) Updated the first post of the thread with the data collected (182 replies now)... this has turned into a nice little thread Edited August 19, 2007 by graysky Share this post Link to post Share on other sites More sharing options...
graysky Posted August 25, 2007 Posted August 25, 2007 Updated the first post of the thread with the data collected (208 replies now)... Share this post Link to post Share on other sites More sharing options...
airman Posted August 25, 2007 Posted August 25, 2007 production code: SLACR(g0) VID: 1.2750v Share this post Link to post Share on other sites More sharing options...
graysky Posted September 23, 2007 Posted September 23, 2007 Okay all, this will be the final update; please don't post new VID data. I'm not totally sure the integrity of the data collected is that high. What I mean by that is I have read several reports of different reported VIDs for the same chip on different boards. I have also read about the VID changing based on the speedstep state and other factors. I started this thread hoping to see some sort of correlation between VID magnitude and vcore @ a given o/c level. I have received mixed reports on this front as well. I think the bottom line is there isn't a correlation between VID and overclockibility. Since you guys took the time to reply to the post, the least I can do is update the data for the last time: Replies for B3: 102 Replies for G0: 158 Total replies: 260 (a great response!) I updated the first post of the thread with the new histograms. Thanks to all who replied. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now