mallardhunter83 Posted June 25, 2007 Posted June 25, 2007 First time at this, but cant boot into windows with fsb over 325, and will not post at around 335 to 340. Not stable at 325 fsb, will only run orthos for maybe 1 min. Not an overheating problem, under load max temp 45C. Stable at fsb 300 orthos for 10hrs E6600 P5b deluxe, Crutial Balistic pc2-6400, aftermarket cooler Running Vista 32bit, is this my problem? I have raised the CPU voltage to 1.4V and Ram voltage to 2.15V and changed the ram timings in the bios. Ram is rated for 2.2V but not option in bios. I have disabled the stuff the other forums say to disable in the bios, but may be missing something. would like to get up to 3.4 or 3.5 Ghtz Also Saphire 1950x pro Share this post Link to post Share on other sites More sharing options...
mallardhunter83 Posted June 25, 2007 Posted June 25, 2007 keyboard likes to skip letters Share this post Link to post Share on other sites More sharing options...
Guest ecthlipsis Posted June 25, 2007 Posted June 25, 2007 When you OC your FSB, you also OC your ram at the same time. The level of OC to the ram depends on your divider ration. What is yours currently set to? Make sure you read our sticky thread of OC basics and get the necessary software (like CPU-Z) to monitor things. You haven't given us much information to go on. You should be able to get well above 325 FSB, though, so something is certainly going right. Let us know what your ram is currently clocked at, and what the divider is set to. It might very well be that you are OCing the ram too much for 2.1v, as that is less than stock voltage. Share this post Link to post Share on other sites More sharing options...
mallardhunter83 Posted June 25, 2007 Posted June 25, 2007 ram is set initally to 533 with fsb at 266 havent checked but ram should be at 640 when at 325 i have downloaded orthos, cpuz, super pi, core temp and sandra 2007 Share this post Link to post Share on other sites More sharing options...
mallardhunter83 Posted June 25, 2007 Posted June 25, 2007 Am is susposed to run a lower multiplier? i can boot at fsb of 400*9 but will not post at 401*9. not stable at this speed though. orthos for 5 seconds. May be stable around fsb of 370*9 ran orthos for a few mins and no errors. Share this post Link to post Share on other sites More sharing options...
mallardhunter83 Posted June 27, 2007 Posted June 27, 2007 still no post at fsb 340. I have moved my ram frmo slots a1 b1 to slots a2 b2 and had no luck, then tried booting (at fsb340) with stick 1 in slot a1 and then in b1 with no luck. last tried to boot(at fsb 340) with stick 2 in slot a1 and then in b1 and no luck. ram voltage at 2.25, cpu at 1.4 NB at 1.55(i think). have every enable disable option that is under the jumper free settings turned to off. also tried to run orthos at fsb 320 with no luck. ram is set to 1:1 i think. at fsb 266 ram is at 533 Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now