kendellrt Posted June 27, 2007 Posted June 27, 2007 My temps under Orthos load highest temp using TAT was 65c both cores. My Vcore is 1.51v, NB 1.55v, FSB 1.4v. I didn't mention that my first P5B Deluxe died on me a week ago, this new one is allowing me to use a lower Vcore than the first one. My Vcore on old mainboard was 1.57v compaired to now 1.51v and I get lower temps to. So I'm at 3.6GHz 400x9 with full Orthos load never higher than 65c using TAT. I am higher than that with TAT or Orthos, but not everyday load with FAH. I assume that lapping your HSF and CPU made the difference. Okay, more votes! Share this post Link to post Share on other sites More sharing options...
Systemlord Posted June 28, 2007 Posted June 28, 2007 I assume that lapping your HSF and CPU made the difference. "Oh yes it did as you have better heat transfer from the IHS to the heatsink." I can remove heat at a faster rate and that makes all the differance in the world when your stressing the CPU, your load temps go way down. Share this post Link to post Share on other sites More sharing options...
kendellrt Posted July 2, 2007 Posted July 2, 2007 Any more opinions? Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now