Jump to content

Voltage Question about 2.8 D chip


Hailstorm

Recommended Posts

Ok, the question is. What is the max voltage and max temp for the Pent D 2.8. Basically its from the Intel deal last year. I have a ASUS P5LD2 deluxe Mobo. I am looking to crank this thing up now and just want to remain safe.

 

 

 

Its been a while since I wanted to do this. but, I guess getting free from a divorce will that :thumbs-up:

Share this post


Link to post
Share on other sites

Ok, the question is. What is the max voltage and max temp for the Pent D 2.8. Basically its from the Intel deal last year. I have a ASUS P5LD2 deluxe Mobo. I am looking to crank this thing up now and just want to remain safe.

Its been a while since I wanted to do this. but, I guess getting free from a divorce will that :thumbs-up:

 

Depends, is it the 8xx or the 9xx, the 9xx=smaller core=less voltage

Edited by The Unforgivin

Share this post


Link to post
Share on other sites

CPUID.jpg

Hope this can be seen.

here ya go...its an 820 1.25 volts

 

Pentium D 820

 

Frequency 2.80 GHz

 

Package 775-pin PLGA

 

Vcore 1.25V-1.4V

 

Bus frequency 800 MHz

 

Typical heat dissipation 95W

 

Core stepping A0

 

Max. typical case temperature 69.8

Share this post


Link to post
Share on other sites

when OCing, about 1.5v on that chip is the max for most people on air. I doubt you'll reach that voltage anyways as the temps skyrocket exponentially after just increasing it by less than .05v

Share this post


Link to post
Share on other sites

Whats max temp? 70c?

 

Thanks guys for the help by the way :typing:

 

70c, once you hit that, it'll shutdown automatically, and you WILL be hitting that temp, hehe, I hit that barrier with a single core 3.4e with a huge HS :lol:

Share this post


Link to post
Share on other sites

Well, here is a update.

 

I keep locking up. I lock up in Steam. When I started to press the CPU it either locks up as I enter a server or it locks up during map change. The bad thing is STEAM has been having issues with map changes anyhow. I did take the voltage up to 1.4 with the low over clock I tried.

 

I also have had the PC shut down on me. Screen go black and I can here the fans running. But nothign else. I think I will start to run some diagnostics on it. I have a feeling my cheap RAM is the issue. To me its the cheapest thing I have in the box. So, I assume its the weakest link.

 

 

I will update my sig as well.

 

Any thoughts?

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...