Jump to content
Sign in to follow this  
LucifersMagician

No Display

Recommended Posts

Ok on the Biohazard v2.0 by Psychotic-God... we cant get a image we turn it on and it says "No /input /signal".... what could be the issue with it?? only once have we gtten to the Xp screena nd then ti froze... last night the card was working fine..the only thing i did was put in a new power supply... from i think a 400 to a 350...

Share this post


Link to post
Share on other sites

So if you link to your rig is accurate, you are running your rig and watercooling, and you just went from 400W to 350W?

 

Sounds like you might need those extra 50W

Share this post


Link to post
Share on other sites
So if you link to your rig is accurate, you are running your rig and watercooling, and you just went from 400W to 350W?

 

Sounds like you might need those extra 50W

616721[/snapback]

Yeah, well, to be accurate, we did change the MX-4000 to a Radeon x800Xl, that propably took a good additional chunk of power drain. Could the changed graphic card be the source? yet it was working when we first put it in.

Share this post


Link to post
Share on other sites

1. make sure card is in all the way.

2. tighten the cable screws if its really loose and falls out like mine do.

3. if all else fails blow it up.

 

could be the PSU going from a higher watt psu to a lower one is usually a big hint. try putting the old one back in, see wat happens.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...