skibar350 Posted February 24, 2003 Posted February 24, 2003 I wanted to over clock my pc from within WindowsXP using easyTune 4 to benchmark for temps and stability before heading into the bios, since the program came with my mob. But XP crashes and gives me a memory protection error when I ingauge the easytune. The settings I'm using I thought where modest for a KT133 I wanted to overclock from 133 fsb to 143 to start with. My temps stay @32c cpu & 28c system in the bios health. But then I figured it must be a problem in the bios settings with my ram or something else. My settings seem fine: (Ram Dram Drive strength (manual), md bus strenth (high), cas bus strength (high), delay dram read lach (No Delay), memory data drive (6ma), sdram command drive (16ma), memory address drive (16ma), cas# drive (8ma), and Ras# drive (16ma) other setting in clude TopPerformance (Enabled), Enhance atapi performance (Enabled) and probably the most important FSB (determinded by jumper) and the jumper is set to 133, and I need to know if These setting look right to you great oc'ers out there . I can't find any info about these settings from Gigabyte or any other resource. And Please any sugestions are very welcome! Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.