Jump to content

How Should I Place Fans To Cool Hd?


thef1re
 Share

Recommended Posts

My case allows space for 4x80mm fans infront for intake. But i only have 2 fans to use for the front. Should i put the 2fans on top row or 2nd row? and where should the HD be to be cooled best by the fans? SHould the HD be under the fans, letting cool air flow over it? Should the HD be ontop of fans, letting cool air go under? or should HD be in middle of fan, letting fan blow into HD?

 

I had 1 fan blowwing into HD and added another next to it , so i hav 2 fans blowing into HD and i didnt get a lower temp..thats y i am asking for best way to cool HD with my situation.

 

fanplcemnt8ut.gif

Edited by thef1re

Share this post


Link to post
Share on other sites

what do you mean? my HD has a open bottom, revealing the chips. Are you saying that i should place my HD ontop of the fans letting the fans push air past under the HD? or fans ontop of HDD. with HD beneath it?

Edited by thef1re

Share this post


Link to post
Share on other sites

i wouldn't worry about HDD over heating. but just incase, id say like 3. But you dont really wanna block air flow too. and yes try to blow the air to the bottom of the HDD.

 

or you can just get a 80mm HDD cooler. for like $5 now...

Share this post


Link to post
Share on other sites

youd be fine with anyof them, but Id take 4.

 

Seeing that hot air rises, you would want your intake as low as possible so while it heats up, it will rise and cool down other components and ultimatly out through your exhaust. (idealy)

 

but really, you shouldnt worry too much, your HDD's will be fine :)

Share this post


Link to post
Share on other sites

wow only 32 MAX?! thats pretty good. My brothers HDD survived with no fans at all. And still working fine. it might went up to 40-50 degress celcius in summer. no fans at all. We didn't know anything about comps back then. =D and it was running an AMD Athlon 1.4 with a small fan.

Share this post


Link to post
Share on other sites

If you really want to cool your HD mod one of your fan to fit on the underside of it, where ther chips are. Leave about 1 inch between the drive and the fan, You can easily make brackets to fit the drive cage for the fan and wham!! a 80mm right where the HD sweats :)

Edited by kobalt

Share this post


Link to post
Share on other sites

i'd just push air under them, because its the underside that accumulates the heat, and that way, you will also be blowing cooler air into the case instead of blocking it by putting it in front of the hd.

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...