Jump to content

Recommended Posts

AMD Athlon XP-A, 1886 MHz (11 x 171) 2500+(first i ve added 5 to fbs)

MSI KT4AV (MS-6712) (6 PCI, 1 AGP, 3 DIMM, Audio)

256 MB (PC3200 DDR SDRAM)

 

 

AGP TİMİNG CONTROL

agp mode:?

agp aperture size:?

agp master 1 w/s write:?

 

 

agp master 1 w/s read:?

agp read syncronization

 

SDRAM CASH latency:?

Row precharge time:?

ras pulse width:?

ras to cash delay:?

write recovery delay:?

bank interleave:?

DDR400 tWRT timing:3t?

sdram burst lenght:?

sdram 1t command:?

fast command:?

fast r-2-r turnaround:?

 

agp and ddrvoltage:?

 

how can i arrenge these for optimum O/C?

İ ve written these a lot of times but nobody answer me,yet

you are really overclockers,tell me what the ...k are these?

Share this post


Link to post
Share on other sites

"AGP TİMİNG CONTROL"

agp mode: if its 8x leave it ( it affects how the card operates, leave it to auto if there is such option and highly recomend leavin it.

agp aperture size: (just put the double the ammount of video memory u got and put it in, for exmaple, u got a 128mb vid card, put it to 256, its just a limit thats set so its kept within the range the card can handle)

agp master 1 w/s write:enable (lowers the time it takes to transfer data)

agp master 1 w/s read:enable (read the above)

agp read syncronization:enable it if you can

*Caution*

These options is recommended to be left at thier defaults if your components cannot support the changing of thier value.

SDRAM CASH latency:2

bank interleave: enable if ram supports it

DDR400 tWRT timing:try 2t

sdram burst lenght:2

sdram 1t command:2

agp and ddrvoltage: this affect how much volts is pumped to your ram and video card, becarefull though, if you put too much or too little you may wind up blowing out some very valueable stuff.

If you have any problems, place the settings back to thier defaults and remember take it step by step.

Hope it helps you.

Share this post


Link to post
Share on other sites

"AGP TİMİNG CONTROL"

agp mode: if its 8x leave it ( it affects how the card operates, leave it to auto if there is such option and highly recomend leavin it.

agp aperture size: (just put the double the ammount of video memory u got and put it in, for exmaple, u got a 128mb vid card, put it to 256, its just a limit thats set so its kept within the range the card can handle)

agp master 1 w/s write:enable (lowers the time it takes to transfer data)

agp master 1 w/s read:enable (read the above)

agp read syncronization:enable it if you can

          *Caution*

These options is recommended to be left at thier defaults if your components cannot support the changing of thier value.

SDRAM CASH latency:2

bank interleave: enable if ram supports it

DDR400 tWRT timing:try 2t

sdram burst lenght:2

sdram 1t command:2

agp and ddrvoltage: this affect how much volts is pumped to your ram and video card, becarefull though, if you put too much or too little you may wind up blowing out some very valueable stuff.

                  If you have any problems, place the settings back to thier defaults and remember take it step by step.

Hope it helps you.

400327[/snapback]

 

where have you been? :(

(joking)here is the solution you gave me,thanx god

my impression is that there are too many person in this forum

but they only prefer to compare their o/c values

they dont wanna help people

never mind

thanx a lot my friend i ll take that responsibility

 

:D

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...