bombir6 Posted October 26, 2004 Posted October 26, 2004 sytem: p4c800 e deluxe asus,3.2 prescott,300 gig sata driver maxtor,audigy 2 z platinum, bfg 6800 ultra oc,plextor dvd burner,memorex cd burner, 1gig crucial memmory pc 3200, water cool, how high can i oc this system an can some one give me any tips on this. very new to oc. this is what i have it clock so far 4000.2 mhz, vcore voltage 1.552, sdram 333 mhz, fsb 250,bus speed 1000mhz. on cpuz under memory it says frequency 200 mhz,fsb dram 5:4. 3.0 clocks.4.0 clocks,4.0 clocks,8.0 clocks its this fine am new to this and i will take all the advice i can get thank you Quote Share this post Link to post Share on other sites More sharing options...
Guest Silenc3 Posted October 27, 2004 Posted October 27, 2004 Looks good to me, run some Prime95 24hrs to see if shes stable Quote Share this post Link to post Share on other sites More sharing options...
GregP24 Posted October 27, 2004 Posted October 27, 2004 I would try to run the RAM at 1:1. Not sure it will go that high, if your proc is stable(run Prime95 for at least 18 hours to check) at 250 FSB, then you will want to get some 500mhz DDR RAM. Nice OC, BTW. Quote Share this post Link to post Share on other sites More sharing options...
bombir6 Posted October 28, 2004 Posted October 28, 2004 ok it was not stable. so i re did my settings at 240mhz =3.84 dram fre 400mhz agp/pci 66.66/33.33 vcor 1.5875 volts ddr voltage 2.65 agp vddq volts 1.60 performance mode turbo clock 3-4-4-8 (1.1 bus speed 960.2 mhz i ran prime on torture test the middle option high heat,powerand some ram for 23.31 hrs stable as can be did not hang. are this setting fine and should i be able to hit the 4000 mhz mark if i can tweak it some more? am new to this first time oc. load temps were 51 c after running for 23 hrs its that good temp. thanks any suggestion or help please Quote Share this post Link to post Share on other sites More sharing options...
Guest Silenc3 Posted October 29, 2004 Posted October 29, 2004 (edited) If it wasent stable at 4, you probably cant to higher without messing your fsb:dram ratio, and can i ask what brand of ram ya got? Might want to try tightening the timings if you can, if you can do that i'd say you've got a good oC Thats Temp looks good, prescotts run quite hotter than the average cpu, i myself with my prescott is at about 50C load also. Edited October 29, 2004 by Silenc3 Quote Share this post Link to post Share on other sites More sharing options...
bombir6 Posted October 29, 2004 Posted October 29, 2004 crucial pc3200 ddr 400 1 gig. how do i change the timings and to what?new at this! Quote Share this post Link to post Share on other sites More sharing options...
Guest Silenc3 Posted October 29, 2004 Posted October 29, 2004 Should be in your bios somewhere, not sure with the Asus Mobos Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.