Jump to content


Photo
- - - - -

I'm A Bit Lost (newb)


  • Please log in to reply
12 replies to this topic

#13 ccokeman

ccokeman

    ????????????

  • Reviewer
  • PipPipPipPipPipPipPip
  • 12447 posts
  • Gender:Male

Posted 03 July 2004 - 07:33 AM

I can change the agp freq... Do i want that to match my FSB? As far as the temp goes at idle on cooler days it runs @ 43 c under load doesn't get over 56 on hotter days it runs a little warmer at idle around 46 but still doesn't get over 56..

My multiplier is unlocked, but when i lower the multi below 11 i get a message system failed due to overclocking, and it won't boot at all, i have to hold power till it turns off,and bring it back up jump into the bios quickly and change it back... this is very curious to me since lowering the multiplier is the opposite of overclocking... hmmmm again i am lost LOL

Thats what you are looking for . It should be set to 66mhz not auto. If you lock it at 66 you should be stable up to 200fsb at least. Better cooling is always a good thing but you arnt in to bad a shape. You may need 1.75 to 1.8v to get it stable at 200fsb some chips dont need it some do. I needed 1.725 to do 200 fsb 1.8 to do 210 and 1.9 to do 227. :foldon: :foldon:

Processor Intel Core I7 4690X  4.3Ghz
Memory G.Skill RipJaws  32GB 2400Mhz
Motherboard ASUS Rampage IV BE
Graphics  GTX TitanX x2
Power Corsair AX 1200,
Monitor ASUS PQ321Q
Cooling Liquid by comittee

Storage  OCZ RevoDrive 350 480GB  Seagate 8TB
Follow OCC on facebook.png