Gremlin Posted April 2, 2020 Posted April 2, 2020 Has any one tried wake on lan recently? I still can't get the board to wake up.. BIOS - APM -> Turn PCIE on is enabled, and netwrok adapter configuration power management everything is set to on.. I have tried different options. and no luck Share this post Link to post Share on other sites More sharing options...
Braegnok Posted April 2, 2020 Posted April 2, 2020 Do you have Fast Startup Enabled? Fast startup can interfere with Wake On LAN. Go to Power Options, click Choose what the power buttons do than click Change settings that are currently unavailable. Scroll down to Shutdown settings and uncheck Turn on fast startup, then click Save changes. Share this post Link to post Share on other sites More sharing options...
Gremlin Posted April 2, 2020 Posted April 2, 2020 2 hours ago, Braegnok said: Do you have Fast Startup Enabled? Fast startup can interfere with Wake On LAN. Go to Power Options, click Choose what the power buttons do than click Change settings that are currently unavailable. Scroll down to Shutdown settings and uncheck Turn on fast startup, then click Save changes. I went into the bios and disabled Fast Startup..And tried it and did not bring it up. I am looking for the settings you mentioned in the support manual Share this post Link to post Share on other sites More sharing options...
Braegnok Posted April 2, 2020 Posted April 2, 2020 (edited) Fast Startup is a hybrid state in Windows 10, to disable it press Windows Key + X than Power Options. After disabling fast startup if you are still having issues,.. follow this guide to confirm your settings are correct to enable wake-on LAN. https://www.groovypost.com/howto/enable-wake-on-lan-windows-10/ Edited April 2, 2020 by Braegnok Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now