Jump to content
technician

System upgrade advice needed

Recommended Posts

My current build:

Asus Maximus VIII Ranger motherboard

Intel Core i5-6600K CPU overclocked to 4,7 GHz

G.Skill Ripjaws V DDR4-2800MHz CL15-16-16-35 (2x8GB)

Noctua NH-U12S (2 fans) CPU cooler

Asus ROG Strix RTX 2070 Super OC graphics card

Samsung 960 Evo M.2 SSD system drive

Corsair RM650i PSU

 

I was wondering if it’s time to upgrade my CPU, motherboard and RAM and whether I get any benefits out of this. I’d like to be economical and practical about it but at the same time get better performance compared to my current system otherwise there’s no point in spending money and get the same result.

So I was thinking about combination of Asus ROG Strix X570-E Gaming motherboard with Ryzen 7 3700x CPU. There’s one thing I don’t like on this motherboard though, which is how M.2 heatsinks are implemented that require removal of chipset shroud. I also consider Gigabyte X570 Aorus Ultra motherboard for it has 3 M.2 slots and better implementation of their heatsinks. But I have no idea about the quality of Gigabyte’s motherboards, UEFI and customer support as I’ve always used Asus motherboards and got accustomed to their products and ecosystem.

I’m not sure if my current RAM will work with these motherboards and CPU and if not, what speeds would you recommend, what capacity and how many modules should I get, two or four. Will 32GB be of any use for me and in the near future and should I get 4x8GB or 2x16GB modules?

Will my current CPU cooler be sufficient for Ryzen 7 3700x? If not, I still have my 3-years old Corsair H110i AIO cooler, which I actually consider selling while it lasts and get something like Noctua NH-D15 Chromax Black or NH-U12A if my current CPU cooler is insufficient.

If this whole idea of upgrading currently not worth it, I was wondering if the next generation of Ryzen CPUs get even better. The way I understand it, this new 7nm manufacturing process brings new challenges and to me it looks like the entire platform has too many ‘rough edges’ like CPUs not being able to hit higher clocks, for instance. I also don’t particularly like active cooling (fan) on chipset. It’s one more source of noise, one more thing to get broken over time. Most of these fans are close or directly under the graphics card expelling hot air. I wonder if already next generation of motherboards will do without active cooling and most importantly, be cheaper than current generation.

And I’m not sure if there’s anything better to expect from the next generation of Intel CPUs in terms of price/performance and platform innovation. Correct me if I’m wrong.

I’ve been able to achieve sustainable under any workload overclock for my CPU at 4,7GHz on all cores leaving all other settings including core voltage on ‘auto’. Temperatures under load (Cinebench R20, Asus RealBench, gaming) rarely get to 75 degrees Celsius max.

I game at 1440p resolution and in such titles as ‘Deus Ex: Mankind Divided’, ‘Shadow of the Tomb Raider’ my FPS hover around 90s with DX12 and around 70s with occasional dips to 60s with DX11 with all the graphics settings at max.

Occasionally I do some light photo editing/retouching after scanning my photo negatives from the past, I digitize my CDs, DVDs and some Blu-Rays, which sometimes require format conversion. Blu-Ray conversion actually takes hours with this CPU but I rarely do this.

So these are my thoughts. Any comments and suggestions are highly welcome!

Thank you in advance! 

Share this post


Link to post
Share on other sites

Well currently the i9 9900K is still the fastest gaming CPU (better than any Ryzen) if that helps you make a decision.

Im not sure how the i5 6600k stands up against AMD 3700X or i7 9700k which is fairly comparable in games. I would have to do some research. I dont have that cpu to do a direct comparison.

Share this post


Link to post
Share on other sites

I decided to make an upgrade. For the motherboard I chose MSI MEG X570 UNIFY, which is practically a barebone MSI MEG X570 ACE. And this Black Friday I was able to buy Ryzen 7 3800x for the price of 3700x. Now I have another dilemma.

I’m looking for compatible memory modules. I’d like to fill all 4 memory slots mostly from aesthetical point of view. But I was wondering if it will have some negative effect as opposed to using only 2 memory slots especially after reading warnings about using all 4 slots instead of 2 on X570 motherboards as well as seeing ASRock recommendations here: https://www.tomshardware.com/news/amd-ryzen-3000-cpus-memory-recommendations-asrock,39756.html . I’d like to buy DDR4-3200 memory kit consisting of 4 memory sticks 8GB each. Will it also matter whether memory sticks are single-rank or dual-rank? I’m not planning to manually overclock the memory and will only apply XMP memory profile. It’s also likely that I won’t see much benefit from manually overclocking the CPU.

I narrowed my search down to the following kit, which is in MSI’s QVL and marked as suitable for filling all 4 memory slots on this motherboard or at least that’s how I interpret their QVL:

Corsair Vengeance LPX 32GB (4 x 8GB) DDR4 DRAM 3200MHz C16 (SKU: CMK32GX4M4B3200C16W).

Can I be sure I won’t have any problems with motherboard or CPU accepting this memory kit? Will it have any negative impact on performance when using XMP memory profile as opposed to using memory of the same capacity consisting of 2 memory modules with exactly the same timings (Corsair, SKU: CMK32GX4M2B3200C16W)? Which one is better from performance and stability point of view or are they equally good? So far MSI didn’t give me a straight answer.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×