Jump to content
bling

MyPC - Liquid Time

Recommended Posts

I don't think it is considered a desktop unless it is covered with paper and books (in no specific order).

  • Like 1

Share this post


Link to post
Share on other sites

New ssd arrived and promptly installed.

TQILFtEl.jpg

 

I had a small problem with a tube that was too short due to a wrong test fitting, but besides this the tubing went way much more smoothly than the other time! Here during the leak testing with all the tubes in place.

3f7OyEPl.jpg

 

And once that was done I filled the loop with the coolant and started the bleeding.

tOYauYml.jpg

 

While doing some cable management I realized that with the inverted layout I need only straight sata cables, therefore I'm stuck again. But while waiting the data cable and the cablemod ones, I proceeded inverting the front panel

LLHbET1l.jpg

Share this post


Link to post
Share on other sites

I finally managed to get my hands on some cablemod cables

wV16UaZl.jpg

 

I'm little disappointed about the colour, I thought they were brighter, but anyway still a big improvement both on the aesthetics and the cable management.

 

Then after replacing the cables some heat gun again to complete the work

gDioCwOl.jpg

 

And finally some lights

oFhnuo0l.jpg

 

kvpAOTSl.jpg

 

 

wmQSBlVl.jpg

 

z88MhoAl.jpg

 

Ks3EHZUl.jpg

 

I already have a shipment coming and I still have to build the psu shroud 

Share this post


Link to post
Share on other sites

Here I am after a while with some update.

I wasn't completely satisfied with my runs and with the coolant, that leaved some stains, therefore I decided to completely re-do the loop.

While i was at it I removed all the HDDs, in order to have clearance for a bigger reservoir (250) and a bigger front rad (replaced the EK SE360 with a EK CE420). I tried to put a PE360 on top but there was a clearance problem, therefore I had to downsize to a SE360. With the new 420 rad I switched to 3 bequiet silent wing and replaced all to HD fans to LL ones.

I also replaced the cpu waterblock with a newer Velocity RGB nickel, and the gpu block cover and terminal. I also wanted to switch to the rgb plexy top for the pump but it wasn't on stock.

To complete everything a bitspower flowmeter, crycofuel clear and new cablemod cables.

I also delidded the cpu and added a crucial p1 nvme the ekwb heatsink.

 

Below some picture of the work

cpu delidding before and after

qo3vuhvl.jpg

eom6zoDl.jpg
 
Old loop components ready to be cleaned

lpa4IQvl.jpg

New waterblocks and pump placement (still waiting for the new cablemod cables)

Umv5tnpl.jpg

Final result

S8vGGwdl.jpg

FLiM7Rbl.jpg

Zd9OEgzl.jpg

FuuLwOKl.jpg

Video here

 https://youtu.be/RVL3_VFLOTg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...