Minime 939 Posted March 12, 2018 Posted March 12, 2018 I don't think it is considered a desktop unless it is covered with paper and books (in no specific order). 1 Share this post Link to post Share on other sites More sharing options...
bling Posted March 20, 2018 Posted March 20, 2018 New ssd arrived and promptly installed. I had a small problem with a tube that was too short due to a wrong test fitting, but besides this the tubing went way much more smoothly than the other time! Here during the leak testing with all the tubes in place. And once that was done I filled the loop with the coolant and started the bleeding. While doing some cable management I realized that with the inverted layout I need only straight sata cables, therefore I'm stuck again. But while waiting the data cable and the cablemod ones, I proceeded inverting the front panel Share this post Link to post Share on other sites More sharing options...
bling Posted April 3, 2018 Posted April 3, 2018 I finally managed to get my hands on some cablemod cables I'm little disappointed about the colour, I thought they were brighter, but anyway still a big improvement both on the aesthetics and the cable management. Then after replacing the cables some heat gun again to complete the work And finally some lights I already have a shipment coming and I still have to build the psu shroud Share this post Link to post Share on other sites More sharing options...
dling Posted April 4, 2018 Posted April 4, 2018 WOW!!!! Sweet build. Looks great. 1 Share this post Link to post Share on other sites More sharing options...
bling Posted April 25, 2018 Posted April 25, 2018 Here's the time lapse video of the build Share this post Link to post Share on other sites More sharing options...
bling Posted June 17, 2018 Posted June 17, 2018 Quick video with the result so far Share this post Link to post Share on other sites More sharing options...
SpikeSoprano Posted June 18, 2018 Posted June 18, 2018 Looks Great, good job ! 1 Share this post Link to post Share on other sites More sharing options...
bling Posted June 30, 2018 Posted June 30, 2018 Looks Great, good job !Thanks!!! Share this post Link to post Share on other sites More sharing options...
bling Posted October 19, 2020 Posted October 19, 2020 Here I am after a while with some update. I wasn't completely satisfied with my runs and with the coolant, that leaved some stains, therefore I decided to completely re-do the loop. While i was at it I removed all the HDDs, in order to have clearance for a bigger reservoir (250) and a bigger front rad (replaced the EK SE360 with a EK CE420). I tried to put a PE360 on top but there was a clearance problem, therefore I had to downsize to a SE360. With the new 420 rad I switched to 3 bequiet silent wing and replaced all to HD fans to LL ones. I also replaced the cpu waterblock with a newer Velocity RGB nickel, and the gpu block cover and terminal. I also wanted to switch to the rgb plexy top for the pump but it wasn't on stock. To complete everything a bitspower flowmeter, crycofuel clear and new cablemod cables. I also delidded the cpu and added a crucial p1 nvme the ekwb heatsink. Below some picture of the work cpu delidding before and after Old loop components ready to be cleaned New waterblocks and pump placement (still waiting for the new cablemod cables) Final result Video here https://youtu.be/RVL3_VFLOTg Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now