Jump to content
Sign in to follow this  
WhenKittensATK

[USA-FL] [H] Home Server Parts [W] Paypal

Recommended Posts


 

Shipping to Contiguous United States

Location: Orlando, Florida (local) 

Want: Paypal

 

I'm selling the parts individually.

 

Disclaimer: These parts came from my server rig that has caused me many headaches. If any part should fail, I will offer a full refund if you return the part undamaged (within 1 month).

 

Rosewill RSV-L4500 - 4U - 15 internal HDD bays - $70 (local only)

Includes all accessories.

 

Supermicro 836TQ-R800B - 3U - 16 hot-swap bays - $170 (local only)

Includes BPN-SAS-836TQ backplane, 2x 800W PSUs, fans, and X7DBI+ motherboard. Backplane might need to be replaced, they are about $20 on eBay.

 

Intel Pentium G630 - $15

 

Gigabyte Z68MA-D2H-B3 - $40 <- DVI output for onboard doesn't work. VGA output works however.

 

G.Skill Sniper 2x 8 GB DDR3 1600 - $70

 

G.Skill Ripjaws 2x 8 GB DDR3 1333 - $70

 

Corsair CX430 - $15

 

2x 3 FT Breakout cables (SAS to 4x SATA) - $6 each

 

1x 1.5 FT Breakout cable (SAS to 4x SATA) - $6

 

5.25" 5 Fan Controller - $16

 

3x IBM M1015 in IT mode - $70 each (1 pending sale)

Edited by WhenKittensATK

Share this post


Link to post
Share on other sites

Just curious, what firmware version on the 1015s? Is it safe to assume they've been flashed to the LSI/Avago firmware?

Share this post


Link to post
Share on other sites

They were flashed using LSI 9211-IT firmware. http://imgur.com/GvluRU3 Don't mind the lines, its the semi-broken monitor and not the motherboard or cable.

 

The 19.x.x.x version is the newest one I picked up from eBay. It has a different circuit board layout for the other two.

Edited by WhenKittensATK

Share this post


Link to post
Share on other sites

Bump for good stuff! I have a handful of the same SAS cards (well, the Dell versions) and they're wonderful when updated to the newer firmware versions. :cheers:

Share this post


Link to post
Share on other sites
Sign in to follow this  

×
×
  • Create New...