IVIYTH0S Posted January 26, 2015 Posted January 26, 2015 Glad to you got it sorted out, I'm eager to hear the difference in temps you get after delidding! Kinda glad I have a generation that doesn't need to do that lol Share this post Link to post Share on other sites More sharing options...
Savan Posted February 5, 2015 Posted February 5, 2015 Finally got it delided last night. Took about 2 hrs, and I think I may have chipped the die on the corner with the razor when the IHS finally came off. Pre-delid in prime95 small fft it would jump to 100c almost instantly. I think it actually got hotter than that, but CoreTemp throws out a warning at 100c and stops recording. After delid it ramps up to an average of 92 with a peak of 97 over about a minute of running. Using Coolabratories Liquid Ultra on the die and Gelid GC Extreme on the HS. CM 212 Evo with 2 Noctua NF-F12 Industrial PPC 3000 rpm fans. I think I might reapply the GC, its the hardest TIM to spread evenly I've ever used, and I think I can get a more even spread with a credit card instead of the included spreader stick. Before Chip After Share this post Link to post Share on other sites More sharing options...
tapatalk498 Posted February 24, 2015 Posted February 24, 2015 What mobo? I ask only because I had the exact same issue trying to run a 4790K on a z87 chipset. That will work usually with a bios upgrade (obviously requires a non haswell refresh cpu to happen), otherwise you need a mobo that supports haswell refresh out if the box (h/z97)) Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now