Jump to content
Sign in to follow this  
RazerInc94

Schoolproject: The Extreme IV v2

Recommended Posts

The Extreme IV v2
I Am currently working on a school project where i have build an own computer case from scratch and the idea is to fill it with "extreme hardware".
I know that some of my hardware is not extreme but it works for me. I will upgrade the gpus someday when i can afford it.
Hardware:
ASUS Rampage IV Extreme x79
Intel i7 3930K
16gb Corsair Vengeance
HD 6870 Crossfire
Corsair AX860
Corsair Force 3 120GB
5x Scythe Slip Stream (temporary)
Cooler Master Hyper 212 Evo (temporary)

Water Cooling:
EK-Supremacy - Acetal + Nickel
EK-Reservoir Combo DCP 4.0
EK-CoolStream RAD XT (360)
EK-CoolStream RAD XT (240)
2x EK-FC6870 - Acetal+EN Nickel
2x EK-FC6870 Backplate
EK-FC Bridge TRIPLE
EK-FC Link BLANK

Now lets see some pictures!
8426970423_532cfded5f.jpg
Special thanks to EK waterblocks who sponsor my project with water cooling, couldn't do it without you nice fellows at EK!
8427939136_e967cc4243.jpg
CAD model of how the chassis will look like without the side panels and the motherboard plate.
8426849289_bcd1623ffc.jpg
I use this machine to bend the plates.
8426849103_638d933c6a.jpg
8426849893_f20b9fa467.jpg
Making duplicates of everything in case something goes wrong.
8427940490_d4e2670774.jpg
The rear plate will be screwed in to the motherboard plate. You can also see the front.
I choose to only have one 5.25 "for a fan controller because i dont need an optical drive.
8426850373_d4dd75c87b.jpg
The "basket" that will hold the fan controller in place.
8426850807_7f52445a86.jpg
8426851231_4789527973.jpg
The case is starting to take shape.
8427941332_8379e729fe.jpg
A picture if the welder "S

Share this post


Link to post
Share on other sites

8482145969_096a0e731d.jpg
It has been a while since I updated but have had other things for me so haven't had the time to upload the pictures. As you can see, I mounted some parts out of the water cooling in the computer. I had to remove the plates that lock out the power supply as the res was to high.
8482144789_519bed7fa7.jpg
Took the fan control from the other project, I will buy a new one if i need to some day.
8482143997_4d904ae62f.jpg
I also changed fans to 5 Phobya Nano-G 12.
8483239860_2f27c03904.jpg
Cpu block in place! Really easy to install on socket 2011.
8482148259_b69f4bc42c.jpg
Pump o res combo assembled.
8483238680_766f762f82.jpg
I put a fill port on the bottom so I can drain the whole system easily.
8482147293_01cdcbd520.jpg
As this was my first time to install watercooling I put a lot of paper in the system while I was testing the watercooling. The gpu blocks didn't fit but i am working on a solution so stay tuned!

Edited by RazerInc94

Share this post


Link to post
Share on other sites

I made a basic signal generator and variable power supply. I could only have hoped to do something like this. Good work :thumbsup:

Share this post


Link to post
Share on other sites

Looking nice so far :thumbsup:

 

Wish I had school projects like that :rolleyes:

 

 

School project! The best I ever did was a small 9V power supply!

 

 

I made a basic signal generator and variable power supply. I could only have hoped to do something like this. Good work :thumbsup:

 

Thanks guys! :rolleyes:

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...